wiring on cluth safety swich

[wbj459]

I broke the wires on the clutch safety switch on my farmtrac 300 dtc . How do the 4 wires hook back up?

 

[Oaktree]

Can you match wire colors & splice 'em back up?

If not, you should be able to d/l a manual here.

 

[wbj459]

Can't splice as they broke off at the safety switch

 

[tomplum]

Many times on a 4 pole switch like this you'll find that 2 poles are normally open and 2 are normally closed. If yours is basically completing a ground circuit, I would think that you could do a couple of test hook ups until you found the right combination.

 

[wbj459]

Thanks Tom , will do that Wayne