Dr Dirt
Member
I just wanted to thank you for posting regarding the Woods RM 48 belt! Although I have not yet installed the new belt, your advice will be taken! 
Rear Finish Mower Woods RM48 belt size
- Thread starter jefflove
- Start date
- Views: 47205
Rod in Forfar
Platinum Member
- Joined
- Apr 10, 2010
- Messages
- 576
- Location
- Forfar, Ontario, Canada
- Tractor
- 1960 Massey Ferguson 35 (Perkins), 1995 TAFE 35DI, 1980 Bolens G174, 2005 Kubota B7510, 2020 Kioti Mechron 2200ps UTV Troy-Bilt Horse 2 1988 Case IH 255 4WD with loader and cab
I just wanted to thank you for posting regarding the Woods RM 48 belt! Although I have not yet installed the new belt, your advice will be taken!
The diagram already in this thread will be a big help. I also discovered a trick to install the belt. I use a length of 1" web strap, doubled, so that I can pull hard on it with both hands. When the belt is almost in position I place myself at the right side of the mower, looking from the back. I thread the strap inside the belt by the right pulley, brace my feet against the mower body, and pull hard. The springs will groan, but allow you to stretch the belt over the pulley, and the job is done.
