XG3140H
- Thread starter rdh54
- Start date
- Views: 2145
3Lfarms
Platinum Member
The big cap on the front of the injection pump on the left front is it.
It's the same on my 6168.
Hint: clean around the plug before removing and use a long funnel.
On mine, I was surprised how much oil it took to get the oil level up to the FULL mark from the LOW mark. Took almost 2 quarts. I always fill to the full mark when cold.
It's the same on my 6168.
Hint: clean around the plug before removing and use a long funnel.
On mine, I was surprised how much oil it took to get the oil level up to the FULL mark from the LOW mark. Took almost 2 quarts. I always fill to the full mark when cold.
