Robert_in_NY
Super Member
- Joined
- Aug 1, 2001
- Messages
- 8,552
- Location
- Silver Creek, NY
- Tractor
- Case-IH Farmall 45A, Kubota M8540 Narrow, New Holland TN 65, Bobcat 331, Ford 1920, 1952 John Deere M, Allis Chalmers B, Bombardier Traxter XT, Massey Harris 81RC and a John Deere 3300 combine, Cub Cadet GT1554
gordon21 said:MM: What is the website for that plow? I already have a winch. Do they sell only the blade and pivot hinges? Can you post a pix of the pivots where they attach to the Gator? That setup looks very slick using the winch to lift the blade. If the blade did bump something, the slack in the cable would allow the blade to jump up and then drop back down.
We got 2-3" of very wet snow here in western NC this week. I made a makeshift plow out of some scrap lumber and bolted it to the front of my tractor FEL. It worked OK, but the design would need to be improved if I used it on a regular basis. If I could make a plow for the gator, it would be better. No one is prepared for snow here because it happens so rarely. I plowed our 1.5 mile dirt road for all the neighbors. The main reason was to keep as much melting water off the road as possible for mud prevention reasons.
Is that blade heavy enough to grade a road or is it just for pushing snow?
I was thinking something similar. When I get my UTV I am going to have a winch anyway so the plow would not be that much more. I really do not need it as we have two loader tractors but I think for light snow removal it would be a lot easier for me to use a UTV to keep the drives open and use the tractors to push the banks back or for when we get heavy snows.