Yanmar 1700 2TR17 fuel injector assembly

[Vanladnier]

Hello
I have a Yanmar 1700 with a 2 cylinder engine 2TR17 ! Can anyone please tell me what the torques specs on the fuel injector bolts are and does anyone have a clear diagram on the full assembly of the 3 pieces go and washer placement for this fuel injector assembly into the head ! Due to mine came out and I don’t believe assembled back together right it want start now ! Thanks

 

[California]

Are you familiar with HoyeTractor?

ENGINE_PARTS: Yanmar Tractor Parts

www.hoyetractor.com

 

[bmaverick]

Hello
I have a Yanmar 1700 with a 2 cylinder engine 2TR17 ! Can anyone please tell me what the torques specs on the fuel injector bolts are and does anyone have a clear diagram on the full assembly of the 3 pieces go and washer placement for this fuel injector assembly into the head ! Due to mine came out and I don’t believe assembled back together right it want start now ! Thanks

Compliments of YTOG, see the attached,

main groups.io Group

*Yanmar Tractor Owners Group.* **US models, Gray market models, Cub Cadet models, RK models, even our green siblings known as Deere's. ** *A valuable source for owners of Yanmar tractors.* * * *If you would like to join our group, then click on the +Join This Group button below left. *NOTE: A...

yanmar-tractor-owners.groups.io

YANMAR SERVICE MANUAL - FUEL INJECTION 2TR-2T-3T SERIES YT7708-216E.pdf

 

[pattycake]

The nozzle nut should be tightened to 28.9-32.5 ft-lbs, and the nozzle retainer should be tightened to 14.5-21.7 ft-lbs. This should give you a good starting point to make sure everything is tightened correctly.

Honestly, though, I'm more in favor of turbo options because I've heard a lot of issues with injection systems. You can seek here for some affordable diesel turbo options. I always get my parts and kits from them.