Flyhiflylo
Bronze Member
Pretty big Hoe.
Backhoe Yuchai LW8 Backhoe installed on The Hornet!
- Thread starter Flyhiflylo
- Start date
- Views: 4704
Red55
Gold Member
Scott-
NICE "stinger" Have you tried it yet? Was wondering how smooth the valves were. Am I correct in assuming that it's frame mount and does it have it's own pump or does it use the tractor hydraulics? GOOD LUCK -Ed
NICE "stinger" Have you tried it yet? Was wondering how smooth the valves were. Am I correct in assuming that it's frame mount and does it have it's own pump or does it use the tractor hydraulics? GOOD LUCK -Ed
Bob Rooks
Elite Member
I'm curious, does it have double acting swing cylinders and 180ï° swing?
OP
Flyhiflylo
Bronze Member
The Stinger! I love it!
It is Korean made by Yuchai.
It is a Cat II 3 point and has it's own pump and tank.
Full swing 8'+ flat bottom digging depth.
1400lbs.
It seems to work smooth. I only fired it up for about 30 minutes and barely got all the air out of it. I put 5 gallons of fluid in it and I think it needs about 2-3 more.
I have a Hanmey subframe kit for it I am going to modifiy to work with the subframe from my ZL-60 loader.
It is Korean made by Yuchai.
It is a Cat II 3 point and has it's own pump and tank.
Full swing 8'+ flat bottom digging depth.
1400lbs.
It seems to work smooth. I only fired it up for about 30 minutes and barely got all the air out of it. I put 5 gallons of fluid in it and I think it needs about 2-3 more.
I have a Hanmey subframe kit for it I am going to modifiy to work with the subframe from my ZL-60 loader.
GuglioLS
Veteran Member
- Joined
- Feb 13, 2005
- Messages
- 1,155
- Location
- Edgewood, NM USA
- Tractor
- Jinma 354, 1953 Ford NAA Golden Jubilee, Komatsu Bulldozer
How about some pic's of the Pump and some close up's of the mounting?
Did you try it out? Seems to be a good match for your 554.
Larry
Did you try it out? Seems to be a good match for your 554.
Larry
doxford jim
Veteran Member
- Joined
- Mar 29, 2007
- Messages
- 1,004
- Location
- British Columbia, Canada
- Tractor
- 1959 MF-65 sold, 2007 Jinma 554 diesel.
Flyhiflylo said:
Scott,
With the new LW-8 B/H you are going to have one mean machine at your disposal. It sure looks to be a well built back hoe - any pics of the hydraulics and controls you can share.
Your instrument panel on the 554 is different to what I have on mine - maybe I have the older version.
Jim
OP
Flyhiflylo
Bronze Member
doxford jim said:
I'll take some pics later of the controls. I don't get to spend much time with The Hornet. But the next time I do I will snap some shots.
As for the dash... Yup... It's the latest. It is actually a dash system for use with the cab.
Jinma Just released soft cabs. I'm going to get a bunch with the next shipment.
Bob Rooks
Elite Member
So then, are you a dealer or associated with a dealership>Flyhiflylo said:
OP
Flyhiflylo
Bronze Member
Bob Rooks said:
Only to friends or CTW members in the southwest.
Bob Rooks
Elite Member
Now I understand.