Z Force Lap Bar Steering Adjustment ?

   / Z Force Lap Bar Steering Adjustment ?
  • Thread Starter
#11  
Thanks Bob
I just adjusted the left lap bar back to be even with the right bar and it drives pretty straight agan.
So what is the procedure to "equalize the drive on both sides" ?
I should not have to do that since it drives straight now though should I?
 
Last edited:
   / Z Force Lap Bar Steering Adjustment ? #12  
I don't know the procedure but if it tracks straight ahead no further adjustment should be needed.

Bob B.
 
   / Z Force Lap Bar Steering Adjustment ? #13  
Saxbird,

No, I never touched the control arm ferrules, as you called to them.

With the deck removed, lie under the Z Force and look up at the attachment rods that feed off of the lap bars. The threaded rods have a hime joint at each end, as well as a locking nut. Those are the rods I was referring to. You could certainly do the same thing with the control arm ferrules, but you might run out of threaded rod depending on how many turns you needed to add or subtract.

Gene
 

Tractor & Equipment Auctions

2007 Ford F-350 Post Puller Service Truck (A45336)
2007 Ford F-350...
2013 MAXE BUMPER PULL TRAILER (A47001)
2013 MAXE BUMPER...
2001 Dodge Ram 2500 Stahl Service Truck (A45336)
2001 Dodge Ram...
SAN SEPARATOR (A47001)
SAN SEPARATOR (A47001)
Great Plains 3P300 Three point Hitch Mounted Sprayer (A48561)
Great Plains 3P300...
2013 Ford Focus SE Hatchback (A46684)
2013 Ford Focus SE...
 
Top