Mowing Z425 NOT CUTTING WELL

[DANDERSON]

Hello all!! New to the forum. I just got a Z425 with a 48" cut. Started off good but now it is not cutting very well on one side. On flat ground if you look back you can see parts of the path still standing. I have the striping kit on it and when you back up it seems to cut just fine. Don't really want to mow my yard in reverse!!:confused2: Have the mulching kit on it right now. Also, when I turn to the left to turn around, it seems to cut much lower and leaves a circular path. A buddy told me to check the air pressure. Any help someone can give me would be great! Thanks.

 

[PossumHound]

Welcome to TBN!

I haven't owned a Kbota mower so I have no "inside" knowledge to give you. I'd start by just a good inspection. Is the deck level, look underneath (assuming you have a jack capable of lifting that bad boy) for obvious obstruction, check the tension on the deck belts, just make sure nothing is out of place first.

I'm sure a member with experience with Kubota mowers will chime in soon.

:welcome:

PH

 

[DANDERSON]

Welcome to TBN!

I haven't owned a Kbota mower so I have no "inside" knowledge to give you. I'd start by just a good inspection. Is the deck level, look underneath (assuming you have a jack capable of lifting that bad boy) for obvious obstruction, check the tension on the deck belts, just make sure nothing is out of place first.

I'm sure a member with experience with Kubota mowers will chime in soon.

:welcome:

PH

I thought Kubota's were orange? Mine is Green and Yellow!!!!