ZENNOH YM2200

[jerryswife]

We just purchased a ZENNOH YM 2200. We would like to attach a front-end loader just wondering if anyone else has tried or if you have one. We could use some pointers. If you have one could you let me know the brand/model? If you had to modifiy just some general help Please

 

[Johndeere3720]

Two brands come to mind. Either Koyker loaders or Coldwater Tractor's loaders. Not sure if the Koyker would fit but I bet Coldwater's loader would.
Coldwatertractors.com
Koyker Manufacturing

 

[jerryswife]

Thank you. I have already contacted 2 Koyker dealers and they have never heard of this brand tractor. So I will try the coldwater. Thanks again.

 

[donpeak]

i have a Zen Noh 1501 which was made by Kubota and is similar to a K175 I have front loader. google Zen Noh and you will find pix of several
Yours might have been made by Yanmar. Grey market tractor i think Best Implement in Calif has a lot of parts ___will send you more info that i dont have in this location

 

[Johndeere3720]

Thank you. I have already contacted 2 Koyker dealers and they have never heard of this brand tractor. So I will try the coldwater. Thanks again.

Your tractor is actually a Yanmar, the only difference is the name on the hood. When you order parts it will be under Yanmar YM2200, same with the FEL.

 

[medic0648]

If you need parts manuals look for the john Deere 850, 950, and 1050 manuals. I have a yanmar 2500 which is between the 850 and 950. Yours is the 850 aside for a few features and parts.

 

[Gaterader]

My wife bought me a used Yanmar YM2200 for christmas and I'm looking at your posts, so medic0648, the John Deere 850 bucket should fit my yanmar?

 

[medic0648]

Maybe. I don't know if they used the bulldog loader and rebranded as JD or used their own loader adapted to the yanmars. The only way to know is measure the pin spacing.