apater
New member
Have just bought a zetor 3545 which works fine except there dosen't seem to be a pto disengage lever from 3pl hydraulics.
So when you engauge the hydaulics the pto starts as well which means I can't lift the implement before it starts hoeing.
I can lift when stationary if i select the gear driven hydraulic selector, take it out of 4wd, then the Hi /Low in Neutral and put it in second gear.
Which seems very difficult to lift the hoe whilst still, without the pto going.
I'm hoping someone could help me out where the pto disengauge lever is with info or possibly a photo, anything would be appreciated
Cheers Adam
So when you engauge the hydaulics the pto starts as well which means I can't lift the implement before it starts hoeing.
I can lift when stationary if i select the gear driven hydraulic selector, take it out of 4wd, then the Hi /Low in Neutral and put it in second gear.
Which seems very difficult to lift the hoe whilst still, without the pto going.
I'm hoping someone could help me out where the pto disengauge lever is with info or possibly a photo, anything would be appreciated
Cheers Adam