Results 1 to 10 of 154
-
10-07-2012, 05:19 PM #1
Garage/Shop Projected started Here are some Pic's
Well I got the Foundation in, I have water and Conduit for elec run from house underground to Shop, Radiant Heat is in 4 200 FT Loops. Hopefully framing will start this week, Shop will be 28 X 28 with 10 Ft ceilings on the first floor and 8 ft ceilings on the second floor. Back of shop is about 4 Foot under ground with sides sloping down to 2 Foot toward the front.
SOme pic's show snow fence $200.00 worth to try and keep chickens out so there not eatting seed and some show where I had to dump all the dirt that cam out, I used it to raise a spot in the back where I plan to put a pole barn.












Last edited by JOE G; 10-07-2012 at 06:05 PM.
Husqvarna YTH24V48LS
John Deere LT 133
Husqvarna 7021P
Husqvarna 562XP Woods Ported with .025 pop up Muffler Mod
Husqvarna Rancher 55 2005
Husqvarna 450 Anniversary Edition 2010
STIHL 009 1998
STIHL HT 131 Pole Saw 2012
STIHL FS 110 R Trimmer 2010
STIHL BR 600 Magnum Blower2012
-
10-07-2012 05:19 PM # ADS
-
10-07-2012, 05:49 PM #2Gold Member
- Join Date
- Oct 2011
- Posts
- 324
- Location
- SouthWestern Virginia
- Tractor
- Kubota L 5240 John Deere 550 Gator Toro 60 in zero turn Toro 44 in walk behind
Re: Garage/Shop Projected started Here are some Pic's
Beautiful place and good luck with your building project. Looks like you have thought everything out very well
-
10-07-2012, 06:06 PM #3
Re: Garage/Shop Projected started Here are some Pic's
I am trying it has been quite a bit of work, I purchased this place a few years ago as a foreclosure and it has gone though a complete makeover.
Husqvarna YTH24V48LS
John Deere LT 133
Husqvarna 7021P
Husqvarna 562XP Woods Ported with .025 pop up Muffler Mod
Husqvarna Rancher 55 2005
Husqvarna 450 Anniversary Edition 2010
STIHL 009 1998
STIHL HT 131 Pole Saw 2012
STIHL FS 110 R Trimmer 2010
STIHL BR 600 Magnum Blower2012
-
10-07-2012, 06:12 PM #4
Re: Garage/Shop Projected started Here are some Pic's
A VERY nice set up and a beautiful site enjoy the out buildings.
-
10-07-2012, 06:14 PM #5Silver Member
- Join Date
- Jan 2011
- Posts
- 115
- Location
- Philippi WV
- Tractor
- farmall cub John Deere 310 Backhoe Loader Ventrac 4131
Re: Garage/Shop Projected started Here are some Pic's
Nice project and nice pictures.
-
10-07-2012, 06:28 PM #6
Re: Garage/Shop Projected started Here are some Pic's
I had to take down about 10 Trees there and I didn't realize how far down I was going to have to go to get it level with Dway, I figured 3 Ft it ended up being a little more then Five ft, I ended up putting up 4 ft concrete walls which were fine after slab was down and gravel was down to level site.
Husqvarna YTH24V48LS
John Deere LT 133
Husqvarna 7021P
Husqvarna 562XP Woods Ported with .025 pop up Muffler Mod
Husqvarna Rancher 55 2005
Husqvarna 450 Anniversary Edition 2010
STIHL 009 1998
STIHL HT 131 Pole Saw 2012
STIHL FS 110 R Trimmer 2010
STIHL BR 600 Magnum Blower2012
-
10-07-2012, 06:30 PM #7
Re: Garage/Shop Projected started Here are some Pic's
That is some beautiful property you have there.
-
10-07-2012, 06:39 PM #8
Re: Garage/Shop Projected started Here are some Pic's
It is a nice piece of property, I have streams, With nice swimming holes and native trout, Tons of wildlife for the kids, Great hunting of many different types of Game, I have some fields and some woods, I have a nice yard with 4 out buildings gardens flower and veg. Plenty of 4 Wheeler/Snowmobile trails.
Thanks for the kind words.Husqvarna YTH24V48LS
John Deere LT 133
Husqvarna 7021P
Husqvarna 562XP Woods Ported with .025 pop up Muffler Mod
Husqvarna Rancher 55 2005
Husqvarna 450 Anniversary Edition 2010
STIHL 009 1998
STIHL HT 131 Pole Saw 2012
STIHL FS 110 R Trimmer 2010
STIHL BR 600 Magnum Blower2012
-
10-07-2012, 07:04 PM #9Gold Member
- Join Date
- Jan 2011
- Posts
- 442
- Location
- Central, OK
- Tractor
- jd 1050 LS I3040H
Re: Garage/Shop Projected started Here are some Pic's
Great looking layout. Did you do any foundation drainage on the back/side walls below grade? Will you be installing external insulation on the stem wall? What insulation type and thickness is below the slab?
Getting ready to start my shop and considering putting in radiant heat also.
Thanks
BrianLS I3040H w/ loader
JD 1050 w/ loader and backhoe
-
10-07-2012, 07:19 PM #10
Re: Garage/Shop Projected started Here are some Pic's
Drainage is going in Tom around the slab and will connect to a 6 In French drain I put in last year that runs right in front of the shop along my driveway. I used 2 Inch Board Insulation and a Insultarp on top. I don't know if I am going to put a insulation on the outside wall or not.
Husqvarna YTH24V48LS
John Deere LT 133
Husqvarna 7021P
Husqvarna 562XP Woods Ported with .025 pop up Muffler Mod
Husqvarna Rancher 55 2005
Husqvarna 450 Anniversary Edition 2010
STIHL 009 1998
STIHL HT 131 Pole Saw 2012
STIHL FS 110 R Trimmer 2010
STIHL BR 600 Magnum Blower2012
Similar Threads
-
Started Garage/Shed this week
By efam3300 in forum ProjectsReplies: 14Last Post: 07-27-2012, 10:27 PM -
New shop/garage
By JD6430 in forum ProjectsReplies: 46Last Post: 06-06-2012, 01:15 AM -
Getting my garage started
By dieselsmoke1 in forum PhotosReplies: 0Last Post: 09-08-2009, 09:58 PM -
36x48 Garage/Shop
By GaryInWA in forum ProjectsReplies: 5Last Post: 08-23-2007, 11:21 AM -
Started rebuilding my shop!
By Boondox in forum ProjectsReplies: 37Last Post: 01-10-2004, 07:22 AM


Reply With Quote

