BX23 Kubota snowblower (BX2750?) availability ?

[lawlopez]

Can I buy a Kubota snowblower for the BX23 from Kubota new ?
Does anyone know the price ?

I'm trying to close a deal which today which is why I'm not just calling a dealership.

 

[radioman]

price? not sure. can you order a blower from dealer? I don't see why not.

 

[lawlopez]

Radioman:

after doing a bit more research I must agree.

The BX2750 can be used with BX24, BX25, BX25.

Curiously the web pages on the Canadian Kubota site lists a BX2755HD without specifications. They also list a BX2750 with specifications.

I don't see specifications on the US Kubota site.

 

[CHDinCT]

Assuming you're talking about a front mount blower, buying the sub frame new from your dealer may be more on an issue. Don't know what subframe was required to mount the BX2750 to a BX23, but my recollection is that the subframe changed from the BX23 to the BX24. Still, you should be able to find one used eventually.

 

[CHDinCT]

Well, I found an attachment chart from an old Kubota Whole Goods PDF. Here's what is listed for the BX2750B snow blower. Prices are old so ignore those. Note the requisite subframe and PTO kit requirements.

SNOWBLOWER
BX2750B 50 Two Stage Snowblower 297 $ 1,481.00
Mid-PTO driven, Hyd. Lift,
Manual Chute & Deflector
BX1800, BX1830, BX2200, BX2230, BX22, BX23 requires
BX2751Quick Hitch Subframe Kit, BX2752 Mid PTO Kit,
BX2015A or LA211FL-1 or LA211 and BX2014 Loader Valve
and Mounting Kit. BX1500 requires BX2711 Quick Hitch
Subframe Kit, BX2712 Mid PTO Kit, BX2015A or LA181FL-1 or
LA181 Loader with BX1612 Loader Valve and Mounting Kit.

SNOWBLOWER OPTIONAL ATTACHMENTS
GB2513 Electric Chute Deflector Kit 8 $ 398.00
GB2514B-1 Electric Chute Rotator Kit 8 $ 295.00

 

[lawlopez]

Chris:

So I might be able to find a used snowblower but I might need to buy from the dealer a sub-frame and a drive axle. Good observation.

They are quoting $3,200 (verbal) for either a BX23 or a BX25 snowblower.

We have 1200' to plow and I had to do 4 passes (2 up and 2 down) the drive using a Honda tracked snow blower to clear the driveway sides for the next storm in addition to plowing it with the '93 Toyota pickup with a fisher plow.

I figure BX23/BX25 and a front mounted snowblower and it might be just the 4 passes. The cruise control on the BX25 sounds very nice at that point. I had that on the JD950 I used to plow with. Worked pretty well.

 

[CHDinCT]

Here's the same info for the current BX25 (or BX24). Surprisingly, everything looks the same except the blower is sub-model "D" below whereas it's shown as "B" above. Probably not a meaningful change. Looks like you should be able to order it all new. Good luck.

FRONT SNOWBLOWER
BX2750D 50” Two Stage Snowblower 333 $ 1,859.00
Mid-PTO driven, Hyd. Lift, Manual Chute
& Deflector. Requires BX2751 Quick Hitch
Subframe Kit, BX2314 or BX2324 Front Loader
Valve, BX2752 Mid PTO Kit (BX1850/1860),
Or BX2753 Mid PTO Kit (BX2350/BX2360/BX2660/
BX24/BX25).

 

[lawlopez]

Thanks Chris.

I've been bouncing around from a high hours (1300) dirt cheap BX23 and a well provisioned low hours but more expensive BX23.

This has helped me end up with the dirt cheap one.
It look and runs nice.
Larry

 

[WayneB]

I purchased a BX-2750D from MB tractor this morning and the prices were as follows

BX-2750D: $1686.00
Quick Hitch Sub-frame: $851.00 (already had this item)
Drive Line Kit: $373.00
Front Half PTO Kit: $156.00
Factory Freight: $75.00

Out the door price: $2290.00

 

[lawlopez]

Thanks Wayne.

The more I'm learning the simpler it's getting.