Page 1 of 3 123 LastLast
Results 1 to 10 of 28
  1. #1
    Gold Member lzicc's Avatar
    Join Date
    Jul 2009
    Posts
    388
    Location
    Pittsburgh, Pa
    Tractor
    Kubota Grand L4060

    Default Got my Iowa Farms toothbar today

    Iowa Farms was great to deal with. I got the flat toothbar. It came within few days. It's built nice. Not the best pictures, I got it dirty already.








    Kubota L4060 HST - LA805, BH92, Thumb, 72" BoxBlade

  2. #2
    Super Star Member RoyJackson's Avatar
    Join Date
    Nov 2001
    Posts
    18,845
    Location
    Bethel, Vermont
    Tractor
    John Deere 4400 MFWD, Deere 855D UTV, Z920A Zero Turn Mower and assorted implements

    Default Re: Got my Iowa Farms toothbar today

    Quote Originally Posted by lzicc View Post
    Iowa Farms was great to deal with. I got the flat toothbar. It came within few days. It's built nice. Not the best pictures, I got it dirty already.
    Looks good...and tooth bars should be dirty!
    Roy Jackson

    "Any government that does not trust its citizens with firearms is either a tyranny, or planning to become one."
    -Joseph P. Martino

  3. #3
    Platinum Member bikerdib's Avatar
    Join Date
    May 2010
    Posts
    579
    Location
    Texas
    Tractor
    Kubota B3300SU

    Default Re: Got my Iowa Farms toothbar today

    I wouldn't be without one. I like the flat type, I have the opposite; the plate is inside the bucket and there are fingers at each tooth that hook under the bucket. At the time I ordered mine, I didn't know about the flat type.

    Iowa Farms is great to deal with. I just bought a new B3300 to replace my B7300. I needed an extra tooth since I added to the length of the tooth bar I had on the 7300 to make it fit the 60" bucket on the 3300. I got it from them in 4 days.

  4. #4
    Member
    Join Date
    Mar 2009
    Posts
    43
    Location
    Indianapolis, IN
    Tractor
    b3200

    Default Re: Got my Iowa Farms toothbar today

    I got mine from Iowa as well and installed it today on my B3200. It actually came direct from woods. FYI get the 58.5 it fits like a glove in the bucket. made a world of difference when digging. Mine is like yours bikerdib.

  5. #5
    Silver Member mcnitt's Avatar
    Join Date
    Jul 2005
    Posts
    164
    Location
    Nevada City, California
    Tractor
    Kubota GL3430

    Default Re: Got my Iowa Farms toothbar today

    I wasn't aware of the "flat" type. I can see how it could make a good difference. Thanks for sharing, and good job with the photos!
    Grand L 3430, 723 FEL, ATI grapple, BB w/ T-N-T, Gearmore pallet forks, Gearmore 72" trash fork, KK landscape rake.

    www.campwatanda.com

  6. #6
    Gold Member
    Join Date
    Dec 2008
    Posts
    252
    Location
    Central Vermont
    Tractor
    2008 Kubota BX2660

    Default Re: Got my Iowa Farms toothbar today

    Way to go!
    You will soon wonder how you ever got by without it. I know I myself would never be without a Flat toothbar.

  7. #7

    Default Re: Got my Iowa Farms toothbar today

    I'm also looking at getting a tooth bar from Iowa Farms, and think I have the same loader bucket (LA463-1 66" outside). Here is my question: depending on where I take the inside measurement I get different results. (The cutting edge flares out a bit). What worked for you - 64.5", 64", something else? Thanks.

  8. #8
    Super Member grsthegreat's Avatar
    Join Date
    Jan 2011
    Posts
    6,500
    Location
    north idaho
    Tractor
    dk45se hst cab

    Default Re: Got my Iowa Farms toothbar today

    ok guys, quick question.

    my bucket is set up to accept a toothbar, but i was wondering WHY?

    wont it interfere with grading and back dragging? im constantly scrapping up horse manure, etc. would these bars conflict with that?

    just wondering if i should get some. Those 6 holes in the bucket sure look lonely
    currently own
    2011 Kioti DK45SE HST CAB tractor/loader, Jimna 6" - 3 point wood chipper, 60" JD Brush Hog, JD 60" Rototiller, 3 point post hole digger with hydraulic assist, 3 point spring tooth rake, Fimco 55 gallon weed sprayer with 12 foot boom, 3 point hydraulic wood splitter (home built)
    Quick Attach 79" loader mount snowblower & rear powerpack
    Quick Attach 84" Snow Blade
    Quick Attach 42" pallet forks

  9. #9
    Gold Member
    Join Date
    Apr 2009
    Posts
    307
    Location
    Mason MI.
    Tractor
    B2920

    Default Re: Got my Iowa Farms toothbar today

    Wow that flat tooth bar is nice. I don't see those on their web site? I just emailed them to ask about them. How do you like it?
    Kubota B2920

  10. #10
    Gold Member lzicc's Avatar
    Join Date
    Jul 2009
    Posts
    388
    Location
    Pittsburgh, Pa
    Tractor
    Kubota Grand L4060

    Default Re: Got my Iowa Farms toothbar today

    So far I really like it. I had a regular toothbar on my BX and didn't like not being able to back drag without it leaving marks. This one let's me back drag and keep the ground smooth.

    I got a few PM's about cost. I guess i should have posted that. It cost me $325 shipped if anyone wants to know.
    Kubota L4060 HST - LA805, BH92, Thumb, 72" BoxBlade

Page 1 of 3 123 LastLast

Similar Threads

  1. Which toothbar for BX22
    By jeffmazz in forum Kubota Owning/Operating
    Replies: 12
    Last Post: 11-11-2006, 11:48 PM
  2. Installing Toothbar...Question????
    By bartman in forum Attachments
    Replies: 16
    Last Post: 04-16-2004, 02:25 AM
  3. Another toothbar question
    By netgeek in forum Attachments
    Replies: 8
    Last Post: 04-06-2004, 11:37 AM
  4. Toothbar tolerance
    By Briarwood in forum Attachments
    Replies: 17
    Last Post: 09-18-2003, 10:01 AM
  5. to toothbar or not to toothbar........
    By garchib in forum John Deere Owning/Operating
    Replies: 9
    Last Post: 07-23-2003, 01:12 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.