hazmat
Elite Member
- Joined
- Feb 12, 2002
- Messages
- 4,051
- Location
- West Newbury, MA & Harrison, ME
- Tractor
- Kubota L5460HSTC
Sealed the deal today.
Should get the new machine in about 2 weeks - lots of setup to be done...
B3030 HSDF w/ loaded (Rimguard) turfs
LA403 FEL w/ ATI skid steer quick attach & 60" bucket
72" MMM
2 rear remotes - one valve floating
40 amp alternator
Bradco 2,000# front forks
BL2782 Front snowblower w/ hyrdaulic angle & electric deflector
rear wheel spacers (might not work with the MMM, but I'm taking a chance)
New Seat (part of the bulletin mentioned elswhere)
Woods BH80-X backhoe w/ thumb, 9 & 18" buckets
Kubota Parts & Shop manuals
$36,060 delivered from Chappell Tractor in Milford, NH. Got quotes from 4 area dealers - highest was >$2,000 more. I suppose being a repeat customer doesn't hurt (I bought my TC18 from their Brentwood store).
I'll order a toothbar from Markham welding ($100 cheaper than one from ATI) once I get the bucket to measure.
B3030 HSDF w/ loaded (Rimguard) turfs
LA403 FEL w/ ATI skid steer quick attach & 60" bucket
72" MMM
2 rear remotes - one valve floating
40 amp alternator
Bradco 2,000# front forks
BL2782 Front snowblower w/ hyrdaulic angle & electric deflector
rear wheel spacers (might not work with the MMM, but I'm taking a chance)
New Seat (part of the bulletin mentioned elswhere)
Woods BH80-X backhoe w/ thumb, 9 & 18" buckets
Kubota Parts & Shop manuals
$36,060 delivered from Chappell Tractor in Milford, NH. Got quotes from 4 area dealers - highest was >$2,000 more. I suppose being a repeat customer doesn't hurt (I bought my TC18 from their Brentwood store).
I'll order a toothbar from Markham welding ($100 cheaper than one from ATI) once I get the bucket to measure.