Sold my b2620, want a cab enclosed and something a little more powerful. the 2620 didn't have the grunt to power my chipper or have the 3pt lift capacity for my sander... So had my heart set with the 3350... reading horror stories on regen but cant get a feel for how big of a deal this is. This...
Any time I move PTO lever from 540 to neutral I get horrible grinding. Happens occasionally moving from 960 to neutral as well when mowing. Is there an adjustment somewhere? ANd yes clutch is depressed. When there is no load on PTO its not an issue... I am perplexed. No matter how gently I move...
So wanted to give my 2 cents on the ever popular bx vs. b debate on here and give you my personal experiences. I started with a BX 2230 loader/mower and loved it. Sold it because I got a great deal on a zero turn (Kubota zg223) and already had a b7800 for loader work. Well the zero turn was not...
Just purchased this tractor and went to put on the 3pt arms on for the first time and they hit the backhoe subframe.. this is a huge problem! Anyone else have this setup? I cant believe it. They had to add the extension rails to mount the backhoe to the tractor (only way to mount hoe to grand l...
We have a b7800 with front mount blower, and a rear sander with a cab. We blow a long curvy driveway with elevation changes. So far it hasnt been as good of an expirience as expected.... I much prefer my l3200 rear mount but I digress.
Besides blowing through shear pins at an alarming rate...
I had rear remotes added by my dealer and now I am questioning if this is going to be ok to do what I want. Please excuse if I do not use the right terminology for the parts They added the Kubota valve for an additional remote and the power beyon runs to this valve. I have quick disconnects but...
Recently purchased a used 2009 zg222 with pro deck with about 20 hours on it.
It seems to surge a bit when at full throttle, looking at the throttle linkage when running the actial cable is connected to a spring affair that doesnt do anything unless the machine is running then seems to use...
05 l3400 hst with about 200 hours on it. The hst peddle seems to need adjustment but cant seem to find anywhere to do so. Its sticking in forward and reverse. Does not want to "spring back" to neutral. No grease zerks to be found either. I see like a damper rod but doesnt seem to do anything?
I have a l3400 with bh75 and looking at a b3200 but want to keep my backhoe. Dealer says the subframe is compatible with Bh75a and bh76, 77 and my BH75 will not fit. What is the difference and is there any way to modify?
Currently I have a bx2230 and a l3400 hst. Both have loaders, BX has 60 mower deck and the l3400 has a bh75 backhoe. The L doesnt get used very much any more so i am thinking about consolidating but need something bigger than a BX line. The big question is i dont want to "rebuy" a backhoe and...
Brought my l3400 hst in for service because of an engine noise. After machine is warmed up anything over 1800 RPM had a knocking noise. Sounded like it was coming from the valvetrain. Dealer hears noice but doesnt know what the problem is but says something deffinately isnt right. They looked at...
I have a 05 l3400 HST with about 150 hrs on it. Its the bad serial number series :(
Here is my problem/question. When running at pto rpm the motor has what I would describe as a valve tap sound but at idle and up to half throttle sounds fine. I do not remember it making this noise and from what...
Looking for a loader for my bx2230 and I see the capacity is pretty shabby around 500lbs. My buddy just bought a JD2305 which states lift capacity of 800lbs. Now I have read on these forums john deere measures at the pins but to testthis we put 900 lbs in the bucket and it lifted it fine! So my...
I want to get a loader for the bx2230 but have a few questions. How much different design is it from the new loaders on the bx series?
Will the controls stay on the tractor?
Can I get it with a 4 way valve?
How much should one expect to pay?
Does the bucket have a quick attach option?
First thanks to everyone for all their help and insite. This forum is great, and as a member of many forums regarding various topics this by far is the most "helpfull" and the most proffessional.
A little background info to qualify my review.
I purchased a new house with about 2 acres of...