Recent content by kude

I sat down with a Morton sales rep and he showed the design for the building I and my brother had requested. It's 48 x 120. It will be fully insulated on foundations and concrete slab. The floors will use radiant heat. Hope we can afford to build it. Anyways here are the drawings:

A branch of my dealer had a diesel Z trak 997 on sale. It had a 171 hours and was priced at $12,000. I wouldn't consider buying a new one at new price but I thought this was a good deal. It's got a 72 inch 7 Iron deck. I tell you this thing does a magnificent job of cutting grass, probably...

I went to my dealer this morning and was intending to inquire about a 102xx. The dealer said he had a 2320 with turf tires used at McCormack Place as a sweeper with 51 hours on it. He gave me a price of $13,980 with a 62d mower deck. I thought that was a good price, so I bought it. It was...

I am looking at replacing the rear tires on a 755, factory turf tire size 31x12.50-15. The closest size I can find is 31x13.50-15. Is this aqcceptable or is there a problem. I am assuming the tire is 1 inch wider, but diameter and rim diameter is the same.

My model 60 mower deck on the 755 has finally rusted through. With holes on the deck dirt and grass got sucked up, pack under the shields and the belts come off the pulleys. There is no new deck that the 755 can use. I don't think it has enough HP to run a 3 point hitch grooming mower...

It was extremely humid last night, and we had a pretty intense series of thunderstorms roll through. I went out to start the 3520 and I get nothing but the entire indicator panel flashing like emergency blinkers. It won't turn over. Could moisture have shorted out the panel circuits. There's...

In short is there a straight up Dual Selective Control Valve (SCV) Lever available that can take the place of the shaped Dual Selective Control Valve (SCV) Lever? I have a cab 3520. The Dual Selective Control Valve (SCV) Lever is bent toward me the operator and my leg rubs up against it. I wear...

I've been mowing in the ditch in front of my house . I usually have the flashers going as a warning. It was getting dark and I then switched on the headlights and the tractor died. No power, nothing, dead. I checked fuses and they seem okay. Anybody got a clue on what''s going on? Last year I...

Brothers, I had the dealer come out during the winter to get the snow blade working (a recurring problem, works fine all year until you get a snow day, go figure). Anyways after they left I found a a round cynlinderical flasher module on the floor. I then noticed my flashers didn't work and...

I was looking for one thing and ran across this utility body for a UTV. Anybody see this before? Warner Bodies

Over the years I've had a lot of flats, and I just got tired of it. I've wanted a magnetic sweeper for awhile and finally gave in. I just got it today and threw it on the Gator's blade for a run arounD the yard and a place where I had a burn pile and had leveled it. I'll probably mount it...

I hit something while mowing that shut down the tractor, I restarted the tractor and continued then all of a sudden no power, everything shut down. No dash lights, no fuel fuel pump, and no cranking. I replaced all the fuses. It started and then stopped when I tried to engage the mower, again...

I was in my Gator and went across the road to our south field. I looked out the side of the cab and saw a deep trench and thought I can't get over that, but the Gator went across it no problem. I then saw some pulled out stumps and trash and an old burnt out car body from the 30s. I said to...

I wanted to use my cruise control, but it seems that it won't come on. I was in forward motion, flipped the cruise on button and then the set button, then nothing. The green dash light didn't come on and no cruise control. Is it possible that the cruise/max button and set accel/decel button...

I have a 1993 755. I always wanted a backhoe, but at this point in time, does Deere make a backhoe that could be used, or does someone else or do I have to buy used? Thanks.