Search results

I know what chain grab hooks and J hooks are and how they are used to secure loads/vehiciles on a trailer. What are T grab hooks and how are they used?

The seat on my 2007 Kubota M9540 needs replacing. Would a "universal seat" like Tractor Supply has bolt on like the orginal one? And will it last as long? The orginal one has been on there since it was new.

One of the handiest things to have. I built one (the green one) out of what I had laying around, whichs was 4"x4"x 1/4" square stock and some 1/2" and 3/4" plate. Really too heavy, I just wish I would have made it QH compatible. I recenlty added removeable silver hay spikes to the one I...

Is there a need in welding the under side of the coupler. The original one was and it took a lot of work to get it off. I would not want to go thru that again.

Doing some tree cutting and decided not to burn these limbs. These 15k lbs of limbs were just some of the limbs from 1 tree.

I'm getting a negative value for my eot and 1.25 for my TFT. I've checked my input data and can't find any errors. Any ideas?

Recently bought a 2006 F350 Lariat CC SRW LWB FX4 with 3.73 rear end that had 131k miles from a friend of the family for a farm truck/family hauler. I had it checked out by a ford mechanic friend before I bought it and he didn't find anything wrong. What mpg are others getting with similar...

Anyone use 3 point broadcast spreader and pull type disc together to plant ryegrass in one pass? I know the spreader will spread seed about 25 ft and disc is 12 ft wide. I would normally set spreader at 40 lbs per acre. In theory I should set spreader at 20 lbs per acre but since I'm doubling...

Has anyone mounted a gooseneck ball to the their quick hitch? I have a 3PH trailer mover with a gooseneck ball on it. I was thinking about mounting a gooseneck to the quick hitch that would be out of the way of implements and have the trailer hooked 10" closer to the tractor. Any ideas?

The front, left hub (if you are in the seat) on my M9540 4x4 is making a "popping" sound periodically. It doen't matter if the 4x4 is engaged or not. Any ideas before I call the dealer?

Would this be a good idea...building a 7' or 8' rake that would fit my 2" in receiver hitch on 3 point trailer mover? I have some 1/4" 2" sq tubing and about an 8ft piece of heavy 3"x3" angle that I could bolt the teeth to.

Would like to install 2 forward LEDs and 1 rear LED to my Kubota M9540 ROPS. Question #1 is which light?? I am leaning towards the 18w or 27w LEDs. Question #2...spot or flood light?? I imagine the flood or working lights would be best. Question #3...how to wire it up. My first thought was to...

I built my own mount. I control the up and down with the winch. I also use the same mount with wick removed and a plow point added to make my rows in my garden.

Here's mine along with the cooler/saw gas and oil basket.

A guy that goes to Church with my Mother-In-Law has a 2006 6.0 PSD, crew cab, FX4, SRW, Lariat with 8' bed for sale. It has 130,000 miles on it. Most people don't like the 8' bed cuz its so long, but I prefer it. How many would buy this truck for $17,000 if you knew and trusted the owner...

Here's one the day after I bought a used woods 20'

I assume your 1/4" flat bar is where I drew the black rectangles? I considered add some 1.5" by 1/4" square tubing under the bucket level indicators for added strength because I was planning on welding the grab hooks near the bucket level indicators instead of on the end like you did. What do...

I am not finished with it, mostly because of 11 month twin girls in the house now and my job. When I am outside playing I normally have farm stuff to tend to so the tractor doesn't get sit in the shop much, but here is my brush guard mod. It has chain box and receiver hitch.

How hard is it to replace rear, inner cv boot?

Want a portable (trailer mounted) welder to use on the farm. Also want a back-up generator for the house. I know diesel Welder/Generator are around twice the purchace price of a gas burner and you can only keep gas stock piled so long. Seems like I could ad a tee and cutoff valve from my 250...

Well it's been over a year now and I have not put the hooks on...yet. Between work and twin baby girls, I don't get a chance to go outside and play as much as I used to. As you can see from the attached pics, the bucket level indicators are made from 3/16" metal. The top lip that forms a...

How do you sharpen blades? Do you take them off or sharpen while still on the bushhog? I've tried both, just curious how others do it. Also, how do you get to the center blades? The way I do it is probably not the safest, but I put blocks of wood behind the batwings wheels and then pick up...

I'm sure this has been discussed before. I have a bushhog and hay forks that have been used/abused and need a little TLC. While I was reworking them I was gonna adapt them to a quick hitch. Got 3 tractors, JD 4020, JD 7330, and Kubota M9540. Currently none of the tractors have a quick hitch...

Would like to add 2 work lights pointing forward and 1 or 2 pointing rearward to my Kubota M9540 under my canopy to my ROPS. I wind up feeding cows when I get home from work and the factory lights are almost useless when you stick a roll of hay with FEL. I am leaning towards LED due to the low...

I have a Kubota M9540 that has the lower extendable/sliding arms. I have been in contact with PECS to see if their pin-on model or the new sliding arm model will fit my tractor. Since my implements are not set up for a regular quick hitch and all are different distances between pins, PECS...

The seat on my Kubota M9540HD (open station) needs to be replaced. You can't adjust it and one of the armrest broke the other day. I'll probably call the Kubota dealer and see what they have, but I'd like to look at other options on-line for a differenct syle (more comfortalbe) and hopefully...

Lincoln? Miller? Others? Which do you have? Currently have a Lincoln Ranger 10000 gas and would like to get a diesel because I always have several hundred gallons of diesel fuel.

Found a 1 owner clean crew cab with 144,000 miles for $6,700.00. Don't know much else. I rreally like the 7.3 over all the new diesels. Is it worth it? It looks cleaner and nicer and has less miles than my 2000 F150. Just thinking about belts, hoses, injectors, glow plugs and other costly...

I was given this hydraulic pull type disk, it had been taken apart in the edge of a field to replace some bearings about 12 to 15 years ago and had never been reassembled. Took me about year to find all the pieces, found some and had to buy some. I'm pretty sure it is back together right, but...

At TSC yesterday and was looking at the quick coupling and noticed different ones, single and double acting. What is the difference? Pioneer Quick Coupling, 1/2 in. Single Acting Sleeve Set - 1824203 | Tractor Supply Company Pioneer Quick Coupling, 1/2 in. Double Acting Sleeve Set - 1824407 |...

Recently bought a used woods batwing. I knew from the beginning that one gearbox leaked a little, so the previous owner filled with grease and one wing cylinder leaks a little. They don't worry me, but I know that I need to keep my eyes one them. I also know that I need to check the clutches...

I have a 2007 M9540 HD 4x4 that I bought about a year ago. All grease fittings are easily accessible except the one for the sterring column. Even after looking at the book, I still can't figure out how to get to the grease fitting without taking the dash off. Any suggestions? Thinking about...

Howse has had a 15' batwing out for a few years. Anyone have any experience with one? Need one mostly for pasture clipping, not land clearing. Pros or Cons?

I know this is not really an attachment, but figured this was a good as place as any. Does anybody know anything about a 80 gal, 2 stage, 220 v, vertical Devilbiss air compressor with 6.5 hp motor?

We have several old, but still good cotton wagons that were modifed into a silage wagons that we use every when cutting silage. There are baically a metal frame and running gear farm wagons approx. 6' wide and 14' to 16' long with wood sides 5' tall. We use a sliding gate to pull silage out of...

I have a 6'x14' utility trailer with a tailgate that is at least 4' long (probaly longer). I would like to cut in half and weld some type of hinge to fold it in the middle. Shouild I buy a heavy duty hinge or fab my on out of pipe and round stock? Any suggestions? Thanks, Chris

Thinking about welding 1 hook to the both bucket level indicators (1 on each side) to my M9540 bucket. The bucket indicators are welded to bucket and to the quick attach bracket. From what I can tell, this would be the best place to weld the hooks. Any other suggestions?

I am re-working my father-in-law's old JD disc that I recently acquired, but don't know the exact model. I found a JD KBA 12' (1st attached pic) on the internet that is real similar, but this one is a 14'. I am pretty sure that many of the KB, KC, KBA, KBL, and KBY parts are interchangeable...

I am modifying my M9540 grill to keep limbs from damaging the front of my tractor. I am using a Lincoln sp 175 mig using CO2 for gas. Been using this machine for several years with no problems, but today when I pull the trigger I hear the gas come out for few seconds and then gas barely comes...

Long time reader, first time poster....I just bought a used M9540. I did notice the tube that holds the two ssqa plates together is bent, but didn't think anything of it. When I disconnected from the bucket and tried to hook up to my forks is when I noticed that the ssqa is a little out of line...

Long time reader, first time poster....I just bought a used M9540. I did notice the tube that holds the two plates together is bent, but didn't think anything of it. When I disconnected from the bucket and tried to hook up to my forks is when I noticed that the ssqa is a little out of line and...