Search results

Good morning campers, It's been a while sicne I've been on but I need some assistance. On my 5140M FEL on my FarmTrac 300DTC, I need seal kits for all 4 cylinders and I really need 1 new cylinder (bent piston, don't ask how...) Here are the part numbers for what I need: 903341 Hydraulic...

2 years ago I had about 5 acres cleared in to 4 rather large piles. We attempted to burn one, and let's just say, with the winds coming and going, it was more than I want to procede with. WIth that being said, I got a few bids for contractors to come in and mulch the remaining dry burn piles...

Looking at a good deal on a 2" water pump at TSC: Tractor Supply Company - Pacer Pump 3.5 HP 2 in Plastic I know this is a great pump for moving water, but what about a pressurized stream going from a holding tank, through 1" hose, to a nozzle? I'm looking for something that might help with...

So the bugs here are finaly lgetting to me. From buzzing around to these spiders building castles everywhere. Have anyone ever built their own fogger/mist system for under a porch I see systems all the time that start at over $2000.00. It seems the most expensive parts are the nozzles...

I broke the yoke on my howse 5' deck and it appears I'll need to replace not only that, but the u-joint, and the yoke welded on to the triangle shaft heading towards the pto. The yoke on the mower is 1 3/8" with a shear bolt. If I can get the 2 yokes and u-joint without replacing the entire...

My latest aquisition of a Cummins C112 drill press has me needing a vise to mount on the drill table. Does anyone have any good recommendations? I've thought about getting a milling style vise, but the inability of being able to drill through the material due to the vise being in the way is a...

I was forunate enough to pick up an old Cummins C112 drill press this weekend for a song. The only thing wrong with it is cosmetic: all of the chrome plated or steel aprts have surface rust on them. I'm slowly taking these parts off and getting the rust off then putting a light coat of 30...

After taking a broom to my wrap around porch for the umpteanth time followed by the pressure washer, I'm ready for a spray control system. Being that I have almost 400' of porch, I'm getting quotes that are approaching $3000.00. Most of that is in the spray tips and high end pump. Has...

I've got a 80 gallon IR compressor that I still have sitting on teh original shipping pallet. I've thought about adding casters to it so at least I can move it aroudn the shop to clean behind and underneath, but it would appear that it might be a bit too top heavy without the outriggers like...

Good morning! TGIF! I just got a new 20 gallon parts washer and am looking for a source ( read cheap ) for mineral spirits. The big box stores are selling it for about $10.00 a gallon ( geesh ) :eek: Anyone offer any suggestions on where to purchase 20 to 30 gallons, even in bulk? Thanks

Does anyone by chance found any non oem filter numbers for all of the filters for a 300dtc? Air, fuel, hydraulic, and oil? Thanks

I have a 30x50x12 steel Mueller building with a 10x12 opening and a walk through door both on one end. I am in the process of wiring it for electrical and the next step is finishing off some of the walls for a work bench/tool storage and eventually a conditioned space office across the back...

My shop is finally getting a meter panel now that my "lein holder" has decided to approve my easement. So my question is: Where is the least expensive place to get all of my electrical supplies: Wire Breakers Conduit Boxes Recepticals I figure that Lowes and HD are probably the most...

For all of the time I have been on here, I've never posted a project. So, I thought I'd share what I got accomplished this past weekend. Nothing fancy, but it felt really good once I was finished. About 7 years ago, I aquired an old work table that had been left out in the weather several...

She saw one at a furniture store that she likes. It's made of aged cedar 4" fence pickets. Looks to be 40" or so tall. The shop owner didn't let me take pictures or measurements so I'm kinda screwed there. I've tried to search for plans to no avail. Anyone out there know of what I'm talking...

I've noticed in the past on my TnT that the cylinders raarely stay in the position that I set them at. I have hearrd mention of check valves used in the past and am curious to those that have them, where you got them?? Thanks

I am looking on how you folks drive in the 1/2" x 8' ground rods in your area. I honestly have never had any problem until now. I can get this one pushed in with my bucket almost 7 feet then it just doesn't budge. I prefer not to purchased one of the custom vibrating hammer type drills with...

So here's what I have: When I built my house, the plumbers ran 1/2" black pipe in to my fireplace and had it capped off. There is a key valve inline with this right next to the fireplace. Since we are dealing with propane here, low pressure no big deal. I took a 1/2" x 18" piece of black...

Looks like my Komatsu D21-P6 needs some undercarriage work. Looking at the tracks ( wide swamp tracks that is) , it appears that the pins are worn clear through to the link pins, the drive sprockets need to be built up or replaced, and the rollers probably need to be replaced as well. Other...

I am currently looking at a D21p-7 that has about 4000 hours on it, has fresh paint, wide tracks, and very little rust. Vintage looks to be 1994. Engine fires right up. I plan on using this for underbrush clearing this winter leaving up anything over 4-5" diameter in pines and hardwood. Looks...

I am currently in the process of building my house in my own little woods. The issue at hand is getting water to my humble abode. The water main is 8" pipe at about 65 psi. I have a choice of the standard 5/8" water meter at a given tap fee and monthly tarriff or upgrade to a 1" meter and...

Well after some very good time on the tractor this weekend, the wife and I are planning our fence. SInce we will be moving our horses here, we will need almost 4000 feet of fencing to surround the perimeter of our 13 acres. Looking at the cost of materials, T posts and 2 1/2 inch treated...

I have spent the last week researching the FarmTrac 300DTC and 360DTC and have met with a local dealer and gone for a test drive. I am impressed with the overall operation of these little tractors and believe that for my 13 acres that they will fit the bill without breaking the budget. The...