Search results

I'm looking to have heat installed in my shop for this winter. From what I've read so far, a vented, propane wall mount unit is probably my best option. My shop is a total of 800 square feet, fully insulated. There is a wall in the middle, with a man door for access to both sides. My questions...

One of my FEL lift cylinders is leaking. I've tried teflon tape several times and it appears that the leak is coming from the female fitting that is welded into the cylinder. I can see tiny dots where the paint is removed. My question is, can I "touch" this up with my MIG welder? Or would the...

I've posted about this problem last year and after re-installing my FEL for this spring it's still prevalent (took the front mount blower off for the winter and we get a foot of snow 2 days later.....ahem) On my B3030, my FEL is jerky through out the dump cycle, regardless of engine speed. It...

I have the 63" Kubota Front Mount Blower hooked up to my B3030. Works great, however it's uneven. The right side hits the ground first, it's out by about 1.25" (same as my FEL, but that's another story). Is there anyway to adjust this?

72\" Plow mount? Do you think I can mount a 6' blade to the front of this? Still trying to figure out the hydaulics.......Where the **** are the outputs? Felt a little humor was required, were all lucky folks to have what we have.

Hooked up my B2782 front mount snow blower to my B3030 for the first time this weekend. After about 200', the chain on the blower breaks. No rocks or sticks that I could see, only about 18" of light snow. I repair it (half hazardly mind you) and 100' later, boom, broken again. Why are the sheer...

I posted this in the Kubota room, probably should have posted this question in this room. So, here's my question. I have the 60" MMM on my B-3030. The mower owners manual calls for SAE90 when I change the gear oil. My dealer says they only use UDT hydro fluid, and they don't even carry SAE90...

I have the 60" MMM on my B-3030. The mower owners manual calls for SAE90 when I change the gear oil. My dealer says they only use UDT hydro fluid, and they don't even carry SAE90. He said UDT is better, particularly in our colder climate (Toronto) Is it alright to use Super UDT fluid? thanks

I've noticed a strange problem with my mower linkage. I'll try and explain the best I can. When my 60" mmm is off of my B-3030 and I have the lift linkage pinned up underneath, I find that if the tractors rear 3pt arms are pulled all the way up, it will start to pull on the links with the...

I just completed the 50 hr service on my B3030 last weekend. I had a friend up this weekend who really knows how to operate a FEL and BH (learnt alot just watching him). However, after about an hour of use, we noticed two things. A small leak in one of the cylinders that lifts the FEL. I didn't...

Has anyone completed the 50hr service on their 3030 yet? I'm tackling mine this weekend. I've read what I could find on similar Kubota models to arm myself, but can't find anything on the B3030. I'm wondering if there is anything I should be aware of, or any problems you may have encountered...

48" forks on the rear, cost me a fortune, but these things are heavy duty.

I just had to show off. Makes me wonder how I did without. Cutting into 16" lengths with the chainsaw got a whole lot easier. I'm new to posting here, hope I can be of help now I'm driving my new toy. I've learnt so much from all the experienced posters from this site before my purchase. So...

B-3030 60\" mmm problem Hi Folks, This is my first post here. I learned so much from reading this forum over the last 3 months, so thanks to all. I've had my B-3030 for about 5 weeks now, but only just received the 60" mmm. My problem is that the right side clevis used to lock the mower up...