Search results

I currently have two mini grease guns, one has the pull handle on the bottom and the other does not. The one that does not have the handle works great, the only problem with it is when changing grease cartages it is hard to screw the top back on when pushing the top down, the threads are...

For two years I, like others, have had problems with the tractor failing to start. I went through all the fixes that have appeared within the group, new key switch, new glow plug relay, added the extra relay to the starter, put in a new battery. But the tractor still would no start all the time...

Tried to clean up my tractor a little today, but my biggest problem is GREASE. The area that gives me the most trouble is on the loader. After a couple of lubes the old grease tends to build up around the pins and mixed with a little dusty dirt makes a real nice mess that seems to be waiting for...

I have a 05 TC33da that is starting to blow the number 2 fuse when it is started. Does not happen all the time, just when I really want to get out and do somthing. Problem started about 3 months ago and I went through 4 10a fuses in about a month. The last time it happened, I replaced the 10amp...

Been doing the 300 hr maint on my TC33DA. Got most of the items taken care of, but I can not find the front wheel drive fill holes. There is no bolt as shown in the manual. The only thing I can find that is close to the fill hole location as shown is a small rubber like plug. And if that is the...

Just recieved my new greenhouse kit. It will be a 6x12 foot Rion barn style. The kit is all plastic and the parts look well made. The boxes they came in had a little outside damage, but the inside boxes looked great. Next part of the process is to make sure of where we want it to set and then...

I have a ATV/Lawn tractor pull type rake - it has rear wheels behind the rake. It is nice but needs one more feature - the ablity to lift and lower the rake while riding the ATV. The current raking process is to goto the area to be raked, get off Atv, lower rake, get on Atv, make 1 pass thru...

Looking to get a rake to use with my ATV, seems the best I can find is the Worksaver PLR-72. I believe it would work good with my ATV and my tractor(if I want to pull it). Any comments on this rake or is there a better one to use with an ATV.

Noticed in some of the post that the HTML code is not active and just prints off. On the pages, it says HTML is turned off, but I can not find anywhere to turn it on. So, where do I turn it on??

I have the delux 3 point where the lower hitch links can be slipped out for hooking to attachments. Getting ready to install the pat's quick hitch on my tractor. Looks like I remove the hardware that allows the current links to slip outward and then put the easy change hardware on. Everything...

Thinking of getting a swisher T44 trailmower to use behind my mule and tractor mower. Questions, 1 - can you back up with the mower attached and/or offset, the long reach of the connecting arm looks like it may not work too well. 2 - some models come with the electric start, is it worth the...

Finally got the parts and installed the updated parts for the Hydro cooler on my 33da. The total parts cost me close to $90 with tax. Real easy to install (-getting around the Fel) and it looks much better and safer. I think the new setup will last a long time. I'll never understand why they...

CHECK YOUR HOSES.....Just went out to do a oil change on my TC33DA. Took a look at the two radiaor hoses and they LOOKED fairly good. Then I touched and moved one of the hoses around - There was a split a mile deep and three miles long - IT was almost ready to go. Looked at the other hose...

I have quite a few LARGE shelf rocks laying around that I would like to break up/cut up. The rocks are from 6inch to 12inch thick and average from 5 to 7 ft long, 3 to 4ft wide. Now it would be real nice if I could break them for easy wall building and movement. By shelf rocks, I mean that they...

Been thinking of adding a hydro top link and need to know what size and type of equipment I need to get. I already have two factory remote connections mounted and ready to use. I know I need a cylinder with 2 ball ends, but what size? Hoses, size and length - looks like one could be 1ft and the...

I have a few plastic 4in 10ft drain pipes setting around and wonder if anyone has used them for fence post? I would put at least 3 to 4 ft in the ground and then fill with dirt. For fencing, I would like to use 4/5ft 4x2 or 4x4 square welded wire with metal T post inbetween the plastic post. For...

Got my new tractor LATE Thur, just had time to give it a good look over and move some rocks. Feels like this one is going to be a winner. Friday it started raining early and I didn't get much done outside, but was able to put the left sided step on and adjust the canopy so it would fit in the...

Well, the dealer came by today and took my 33d away. Good by old friend. All the good time away from the house moving dirt and rocks, down in the woods hacking and slashing trees and brush. The roar of the diesel and mower as the grass grew long. Now someone else will have to enjoy it's song...

Well, the decision has been make, trading my TC33d for a new TC33DA with loader. Hope to have it next week if the dealer can snatch one from another dealer. Going to run me $20,500 for TC33DA hydro, R4 tires, 14LA loader with 60 HD bucket, grill guard, 2 remotes, and a metal canopy. Not cheap...

Well the wife said she really likes the new look of the TC's and she understands my need for a more powerful loader, so I get to order a new TC33DA , if we can work out the money. Started looking at the TC45da and pricing them, CEO said it was a little much and there would be other equipment...

Need to get a new mower and the TSC Huskey mowers seem to have the features we want. Any comments on how they hold up or what they cut to sell at TSC specials. Understand they are made by MTD, do they compare to any current MTD models. Any comments welcome...

Looking into trading my TC33d for a new TC33DA to get a better loader and other features that I've seen on the larger TC units, haven't seen a 33 yet. So the questions are does the 33da have the following features? 1. New battery that sets lower and has vent tubes to get rid of the vapor...

Anyone have the spec's on the new loader, would like to know what it's lift weight is going to be. With the current 7308, the spec's show around 800lbs. Trying to figure out if the new loader with a quick attach setup would beat the 7308 enough to justify a new tractor.

Out cleaning up a tree I downed, went to move a limb a little to line it up for some trimming. Started raising it up with the fel and the hose broke. We are suppose to use oil for cleaning our tractors, aren't we??. Well, this means I either need a new line or a repair to the one that broke...

Need to go down and wack some trees, chain saw and other tools into loader and away I go. Along the way, got to move some rocks, dirt, nock down some brush...Take everything out of loader, do job, put everything back in load and move on. There's got to be a better way to do this. Here is what I...

My front tires seem to be going flat more often, possibly due to too many thorns. They are also showning some cracking in the sides and in the treads. So they are going to need replacement soon. Now for my question, in looking at the spec's for the turf tires that I currently have and R4's, all...

Getting ready to have my TC33D go in for it's 600 hour maintenance, is there anything not in the schedule maintenance that I should have them look for? This is the first time that it will back at the dealer, I've done all the greasing and oil changes up to now. Main items for the dealer to look...

Been looking at loaders on the net, thinking that they might do more of my type of play(Work) than a compact tractor. 99% of my usage is loader work with a little mowing other times. No plowing or other field work. My place is mostly grass with some rough areas, no big hills. Anyone else...

Been thinking of putting together a 'Branch Guard' to keep some of the branch slapbacks when moving thru trees. I already have a fiberglass top that is bolted to a frame that hooks to the ropes. It is open in the front. I also have a loader that has never been removed, too useful. What I...

I have a TC33d that the end cap for the air filter is broken on. Almost all the little plastic tabs have boken off and the cap will not stay on tight. Currently using a bungy cord to hold it on, but I still get an air leak around the cap. Has anyone ever replaced the air filter with some other...

I'm starting to look into getting a welder for small jobs. The only problem is that I only have access to 110 service. To put in 220 would cost too much. Now I also could use a generator for those stormy winter days. Last year we went without power for over 4 days. Are the welders with...

Is there any good place to buy NH 33D filters on the net? It's time to change the Oil, trans fluid, and fuel filters. Could also use a new air filter too. Nearest dealer is a good 30 miles away, but UPS seems to show up every now and then.

Been looking at getting a middlebuster for making ditchs and breaking up ground for reshaping. While looking for the middlebuster, I ran across some pictures of bottom plows, they look the same, only the bottom plow sets back further. So, which would work better behind my tractor(TC33d) for...

Just thought I would post a picture of the rear weight I use to counter the FEL. So far I have lifted full buckets of wet dirt and large rocks without any problems. The weights are about 70 lbs each And if I do need more, I think I could add 4 to 8 more weights. Being on a 3pt hitch makes...

Got a new Stihl chain saw and the saleman said it required a 50:1 mix, ok. Checked the oil I used for my old saw and it said it made a 40:1 mix. So I go down to the store and get some oil that say's 50:1, must need more oil to gas mixture. Then I visit another store and see a large container of...

I have the TC33d(hydrostat=go pedal), the brakes have a pedal for the left & right wheels, but how can you use the brakes to steer? If I take my foot off the go pedal, the tractor comletely stops. There is no way to operate the go and one of the brake pedals at the same time!!!! Has anyone any...

Thinking of getting a pressure washer soon and wondering if you can hook up a hose, throw one end into a pond, and have it pull water from the pond. The main use of the washer will be normal cleaning using city water, but it would be nice to also be able to use pond water for putting water on...