Search results

I know there is a lot of talk about the 1 ton's, but I am interested in the 2 ton's specifically this one https://www.ebay.com/itm/354985732038 anyone own one, know if it has a hydro filter, and what attachments can be ordered?

Finally finished, barely fit even with their smallest option the Single BOGL, will test it in a bit Used a diverter kit from Artilian.

I am removing a set of 1/2 QD from a brand new implement to change them to what fits my 3rd function, it required a 2 foot adjustable on one side, and a 1 foot adjustable with a 6 foot pipe on the other, and i still struggled a bit to break them free, Now i have dealt with npt in plumbing, but...

here's the photo, what do we think it is in millimeters? previous fun thread https://www.tractorbynet.com/forums/threads/reading-a-dial-caliper.464064/

I bought a diverter valve kit for my mahindra, it requires drilling a mount bracket into the loader support bracket, this bothers me, even though there are holes already in it. Am I worried about nothing, really would like someone who deals with stresses to tell me I am worried about nothing...

going to be adding a diverter for a 3rd function, some of the fittings on my max 26 have a notch on the couplers. before i go break 700 dollar lines, are any of these lines in general left hand thread?

I am considering buying this, this week, has anyone used one of these? the rear panel has me concerned since if you put enough weight against it, I assume I will struggle to remove the gate/ ramp? I wish it had doors, but it seems like only larger models do, and this is about the weight limit I...

seen on reddit, she looks big.

I feel almost embarrassed to ask this, but I need to confirm my numbers are correct. in the photo is this approximately 47.62 mm?, its saddening, since I use a metric digital one a ton, but people love their old school.

I know a lot of people buy this. Saw it on Deal of the day. Hope it helps someone https://www.amazon.com/DuroMax-XP13000EH-Portable-Propane-Generator/dp/B07G7GGFV6?smid=ATVPDKIKX0DER&linkCode=ll1&tag=ast45-20&linkId=08d1aa9c1da25f3d5015e8722fd50181&language=en_US&ref_=as_li_ss_tl

can I use a acetylene gauge, to replace a broken argon c02 gauge. i got stupid and fell over my tank while smashing a 30 year old regulator...

There are a variety of communities where people are able to mark "issues" solved. it edits the original post with a solved solution link to the thread that fixed the issue. would that be possible here? I think a lot of people would appreciate it when searching etc.... @Muhammad

It has been mentioned before about the quick disconnect on the glow plug rail melting. Mine was melted when I got it, and when I read about it on here. I checked mine, and caused it to stop working. i cleaned it up and slid it back on. that was 8 months ago. Last couple times I went to start...

i have long drives, so i get random contractors trying to offloading random stuff. just got quoted 1k for a tri axle of millings? i thought this was extremely high, when i can get pea gravel, which looks nicer, for like 500 a load. aren't millings pretty much useless to these guys, as i know...

anyone know what the max series engine are rated to run on angle, I have some 25-30 degree hills, that I need to run on. any idea's?

anyone know the bulb type? thinking of converting to LED.

Some of you may remember my complaining about not being able to move the tractor with the seat reversed, while using the backhoe. I thought this was crazy, as who just sits in one place and digs (guess I need to dig ditches). After trying a stick for about an hour i said screw it and designed...

anyone have one of these, looking to see if the accessory wire is tied up somewhere on the tractor.

Got to be honest, getting slightly annoyed with the design of stuff, my mahindra has to loop back the lines for the 3pt/hydro to work with the backhoe off. this loop would just hang, and rub on the pto guard, enough to where its starting to mark the QC. Made this, pretty happy with it, nothing...

I bought a 3d printer out of interest, and for a specific project. Coming to find out I have a million uses for this thing. All of my dust covers were ripped or removed from my mahindra backhoe /3pt. and they are ALL different sizes, plus some of them appear to be like 13-14 bucks a piece for...

I am going to ask a huge favor, do you have the air filter housing where there is a screw in the middle instead of a latch on both sides? if you do would you be willing to open it up and take pictures of both side of where the filter compresses in the housing (the clean side). I bought this...

my cruise control lock for my hst will not hold my tractor pedal down all the way to the floor, it slowly lets it backup to about 3/4 pedal, which unfortunately is not fast enough for some of the work I do. does anyone know if there is an adjustment?

so I have been using a set of pallet forks (Bolt On) on my mahindra, what I find interesting, is that curl is weaker then lift, all the video i have watched the curl is suppose to be stronger, yet when picking up my land plane and some tree's i am apparently over the curl limit, but not over the...

does anyone have one of these, do you have the manual? looking for service and oil type.

Some one please explain to me how this chart works. why is 5w-30 only rated to 50f, but 10w-30 is rated to 80, yet 10w-40 is only good to to 80f, yet 15w-40 is good to 100? I thought the last number was its "hot temperature" so shouldn't 40w be the same regardless of the cold W number?

so this is a brush guard for my tractor, it was hit at some point. i am struggling how to bend this back into place, without cutting it out of the brush bar and getting it on a flat surface and hammering/pressing it straight. any idea's before i get the torch out?

First go around since I grooved the tires, big big difference, I don't know if the snow was different, it was definitely heavier, but significantly less trouble this time, almost 0 spinning and hills i needed diff lock and had to spin my way up, i went in reverse (no diff lock at all). To those...

Guys I think the dealers are pulling the wool over our eyes.... the link below shows why metal snow plows are a waste of money. apparently these come in multiple sizes, this is a 50 inch model Snow Plowing JD with TV Box on a serious note, I hope everyone who is there is doing the best they can.

Bought it 2 weeks ago used from a dealer out of state, runs fine, how long I have 0 clue. I can't even in good conscience sell it to someone else. was the wrong filters used at some point? it appears the filter was changed as the new one (which looked slightly used) looks identical.

I am curious what the max rpm you can achieve on this unit. full throttle for me is just a hair over the mid pto line, so maybe 2600? I am just curious as i do plan to mow, but thought it would have a bit more buffer.

Hello, Picked up a loader and backhoe, i have a lot of blown over trees and tree work i need to do, i was planning to get a piranha bar, then learned about debris Forks which seems to be a much better option, I don't own enough land for a grapple. that said does anyone own both? i have a...

I am new to this, will the mower deck move with the backhoe on? its not moving at all, hst fluid is also low, but tractor moves. new to my used machine and getting a bit nervous max 26xl I don't know if related, but my tractor does not go up a big hill in HI with the load and hoe on, it...

Spent 2 years looking, asked prolly 900 questions here. bought one today, wasn't even planning on it, nor was i even looking. that said it comes monday its a 15 330 hours, i don't believe any fluids have been changed, i will need to figure out what has been changed, whats the oem hst filter...

what are people's opinion of adding a woods backhoe to a machine? a dealer quoted one on a brand new max26xl, its a subframe mount quick connect with dedicated seat are there any pro's/ con's to the factory unit?

so you have a tractor for sell. outside of cash, what would you take that would make you comfortable for a person to pay you the day he takes the tractor. personal check? cashier check? wire transfer? paypal? it seems private people have been ruined by scammers, business have 0 issue with...

guys im confused TractorData.com Mahindra 316 tractor information TractorData.com Mahindra Max 26XL tractor information first question is why are the tractors almost the same price, more importantly how does the backhoe have more dipperstick force on the 26xl when the 3016 is substantially...

in the past couple years, im noticing a trend with used stuff, where the seller refuses to budge even a dollar, I bought a van over 21k used, that the sales guy even said they couldn't move for 2 years, yet only after showing up and walking out door, got 200 dollars off. I am now actively...

I'm trying to get numbers on shipping a tractor, i've been told 1.5-2.0 a mile, is that round trip or one way? do they charge for the return empty generally? I'm using Uship, are there better options?

guys what do you think of the whine at 43 seconds? do they get louder if they have been running longer or heat up? i have no idea how long the machine was running in this first video YouTube sounds a bit different then this one Comparisons between the Mahindra Emax 25 HST and the Max 26xl...

https://www.tractorhouse.com/listings/farm-equipment/for-sale/192455339/2017-mahindra-emax-22s-hst what do we think on the price of this? what would be a ball park cost to get it trailered home 200 miles? first larger tractor anything to be aware of on these models? what would i expect to pay...

Hey guys need another gallon of the new woolwax (fluidfilm) last time i bought it with the undercoating gun from kellys, does anyone know the cheapest place to just buy the gallon?

i got a PowerArc 160 from mark on here a while back. im looking for a scratch start kit to see if i like tig. i know i need a tank for it, but will this work? anyone know what dinse size it uses? Convert your stick to tig! this is about the cheapest i have seen it, anyone know of a better price?

so i have a couple projects where i need to run a sump pump out to a yard, and dump the water above ground. my issue is figuring out how to deal with the pipe that goes from below frost level to above ground to get rid of the water. there is no way to drain to a lower area, has to just be pumped...

got an odd call from my cousin who lives in the city, asking if i had a generator (i have several). i said yes then asked why, he tells me there was some kind of administrative discrepancy at the power company and another house with the same street name (in another city) had a past electrical...

weld rusty metal i have just learned about 6010/6011 and its ability to weld rusty metal without cleaning, is this possible on MIG? sometimes i do exhaust work and grinding cleaning is not allways possible, would i be able to turn down the power arc 160 thats being sold in the other thread...

I know this is going to start a war, figured I post it anyway link is below for a EF2000iS using Pennzoil Conventional 10W40 Motor Oil that has run 18,000 hours. Actually he has multiples over 10k in hours. Yamaha EF2000iS Portable Generator: Product Review | Ghost32Writer I never thought a...

this was linked on another site to me, figure i would pass it on. i did end up buying one, reviews seem very solid! Woot: Daily Deals for Electronics, Computers, Home, Tools, Garden, Sport, Accessories, Kids, Shirt, Wine, & more review on amazon Amazon.com: WEN 56200i, 1600 Running Watts/2000...