Search results

I have a 2019 model Boomer 55 that has the standard Cat 1 hitch. I have never put an implement on the rear as I ordered it new with a 935 GBH backhoe and have never taken it off. I also have a 5000 Ford with Cat 2 hitch that I have bushogged for 30 years with the same rotary cutter. I would like...

When I bought my New Holland Boomer 55 w/cab way back in 2019 a cheap plastic cover was on the nice cloth seat but it is getting pretty ratty. Does anyone know of a custom seat cover, not a generic, can be purchased to custom fit my seat to keep it looking new as long as I have it? Thanks

Recently the high pressure power steering hose ruptured righ above where it attaches to the cylinder at the flair nut. 3/4" wrench is too big & 11/16 too small. 18mm is too small and 19mm is too big. We haveused flaoe nut wrenches, crows foot flair nut wrenches, nothing works. Mine is an early...

I have a early 1968 5000 Ford gas with the 233 CI engine and SOS tranny that I have owned for 33 years that I have done almost nothing but maybe a starter and a set of rear tires. The other day one of the 2 hoses that go to the Power steering split in the metal tube area. I am blind and would...

I procured some old JD NOS parts years ago and this one I have never been able to ID. It looks like the sticker says M7175 or M7571. It is about 19" long. One end is 1.125 17 spines and the other ent is 1" threaded. I am attaching a pic of the sticker and the shaft. Can someone help me ID this...

I have a family member who has a tree leaning over his house that needs cut down and wants me to use my tractor to push it away from the house while he cuts. Is there anyone out there that has expierence pushing over trees with a tractor and which attachment will give me more pushing power fully...

My new Boomer just hit 50 hours so I call the dealer to see if they have the 4 filters and the correct oil for it before I make a trip there. Surely to goodness they do but I call just to make sure. The owners manual says use Ambra 0W-40 oil. The parts guy says they don't have and have NEVER...

Well after much anticipation about when and what my first regen would be be like it happened today at 46.9 hours. I was operating at about 2000 RPM and the engine speeded up slightly and the light came on so I deceided just to let it set and observe it doing it's thing. I could tell it was...

I am getting close to the 50 hour mark on my 2019 Boomer 55 that I purchased new a year or so ago and I have never experienced a regen cycle. I know what the owners manual says but I know some of you have Tier 4 engines and have gone thru one or more. Is there anything special I should or should...

I have some Deere cranks from the 1970's, 1980's that were at a former JD dealer that they had for resale. This dealer went belly up about 10 years ago. The only way I know how to ID them is by their casting numbers. Does anyone know of a source of casting numbers where I might find out what...

I have a couple Case crankshafts that I need to ID from the 1970's and or 1980's. Does anyone know of a source of Case casting numbers where I could use to find out what machine these cranks fit ? Thanks in advance. I can be reached at easair@charter.net

I picked up a 250AS today and does anyone know if there is a chart anywhere that I can determine the year model by the s/n and also what is the difference in a 250A and a 250AS ? Thanks in advance

I have a 2019 Boomer 55 with the mid 2000 rpm pto. Because of my poor eyesight it would be hard for me to see the pto on the underside. Is the pto shaft a 1" 16 spline like the garden tractors of the 1980's & 1990's that had rear 2000 pto? Also, is the male part protruding out of the tractor...

I thought I would share some pics of the triple rear remotes and 3rd function kit I just had installed on my 2019 Boomer 55. There is a young man that just left his job as a mechanic a local NH dealer and is going into business for himself and I was able to get him to come to my house and...

Does anyone know of a 3rd function kit made for a Boomer 55 with cab and 260TLA loader?

I recently purchased a brand new New Holland Boomer 55 with cab which is the same tractor as a LS XR4155. My tractor was supposed to have dual remotes but it came with only 1. I found out that I could get a triple remote kit from LS for just a little more than NH's dual remote kit. NH does not...

I just purchased a brand new New Holland Boomer 55 with the GBH 935 backhoe and it came with a manual thumb. I want to add a hyd. thumb. NH does not offer a hyd. thumb kit for this backhoe. There is a removable plastic cover on the side of the pedalstal just to the right of the BH control valve...

I purchased this 3 rear remote valve kit this week for a XR4155 or similar at a LS dealer. The warehouse sent the 2 valve kit and the dealer didn't catch it and neither did I until I got home. Called dealer and they reordered the kit. They opened the box up today and removed the installation...

I was able to use my new Boomer 55 today for the first time. As soon as I started using the bucket I noticed when I pulled the joystick rearward to lift the bucket that when I released it the bucket just kept climbing and to stop it I had to push it back to the neutral position.When lowering the...

My Boomer 55 was supposed to have dual remotes on it when it arrived from the factory 2 weeks ago but it only had one. The dealer wants 1200.00 to put the 2nd one on. I have the parts manual for it and it has a diagram listing all the parts for a remote but I don't see anything about a kit with...

The latest style of 3 ring binders for your service, parts, owner's, etc. manuals are available thru your local NH dealer. I could not find them anywhere on the internet. There are 2 sizes, 1 1/2" & 3". They are high quality binders and are a little over 20.00 each plus you have to pay the...

If anyone is thinking about buying a New Holland product be advised that unless someone has information that I don't have there is no number at NH headquarters that can give you technical assistance even though they have a tech assist. line. If you seek assistance that is not available at the...

I was looking over my new TLB today, haven't got a chance to play with it yet, and I noticed that the center bucket tooth was about 1/16" from touching the boom with the boom & dipperstick and bucket in their full upright position. If I were to have cranked the tractor and gotten on the backhoe...

My new 935 GBH backhoe came with a manual thumb. I would like to convert it to a hydraulic one. There are access ports on the side of the pedestal just to the right of the BH control valve where you can tap into the hyd. system and it looks to me to be a simple job of mounting a cylinder on the...

Folks, after 6 months and 17 days of waiting the Boomer 55 finally was delivered today, minus the brush guard. They claimed the "couldn't find it" and didn't even bother to tell me they were delivering it without it until I called back to the dealer and asked them where it was at. I'm sure they...

After appx. 6 1/2 months of waiting for my new Boomer 55 HST Cab, 260TL loader & 935GBH BH to arrive it has finally gotten to the dealer. It has taken them 3 days to assemble it and it should be delivered the first of next week. I have been to the dealer twice checking on it and late yesterday...

My Boomer 55 finally came in and I was at the dealer yesterday checking on the progress. I happened to notice that a set of "Gorilla feet" were installed on my outriggers. I asked the mechanic where he got them and he replied " they came with the backhoe". They are like the ones the ones I had...

Back in 2008 I bought a new NH TLB and the dealer had what I remember as "Gorilla Feet" that I bought that were about 10" square and bolted onto the outrigger pads on the BH. I have just bought a new Boomer 55 TLB and I want another pair of these things to put on the 935 GBH but I can't find out...

I have a 1800 RPM 25 KW Genset that is currently powered by a 3.0L GM 4 cylinder LP engine that is computer controlled and the computer is fried and Doosan would want a fortune to fix it. I was thinking of maybe removing the alternator and somehow connecting it via a driveshaft to the mid pto...

I have had a Boomer 55 on order since May 3, 2019 and it finally made it to US soil about 2 weeks ago in Baltimore but for some reason cant make it a days ride to NC and the dealer can give me no info as to when it will get delivered but be that as it may there are only a few videos on Youtube...

I am looking to buy a service & parts manual for the new Boomer 55 Tier IV tractor. I have not found anyone with the parts manual. There is 1 dealer selling the service manual on Ebay for 187.50 I believe. I have attempted to contact the seller twice asking if this is 1 manual or a series of 4...

Posted 7 hrs. ago is a new 270TL loader for 1500.00. Sounds like a good deal.

I have ordered a new Boomer 55 with cab, 935GBH BH, 260TL, etc and will be selling my TC34DA with HST that I bought new in 2008. It has only 210 hours, has never sat out even 1 night. It has the 14LA FEL with a 500.00 tooth bar I installed, front bumper with factory suitcase weights, Gorilla...

I just ordered a new Boomer 55 a couple weeks ago at my local dealer. They don't have a "Boomer" on the lot and do not stock them. Their excuse is that most customers want the cheaper Workmaster's. They know very little about Boomers. The salesman did not even know that NH made one with a CVT...

I have ordered a new Boomer 55 with 935GBH backhoe from my local dealer to replace my TC34DA and 758C backhoe. The only thing they can tell me for certain that it would be here this year ! I'm 66 and hope I live long enough to see it ! Here's my question. I have a 9" bucket for my 758C that I...

I have a TC34DA with 14LA loader and 758C backhoe that I bought new in '08 and have a little over 200 hrs on it. last week I ordered and paid a down payment on a brand new Boomer 55 with 260TLA loader , cab and a 935 GBH backhoe. Delivery will be around Oct. as it has to be built at the factory...

I am looking to add a 541 offset diesel to my collection, a pre '63 red one. I am a serious collector, not a tire kicker. Prefer one already restored. Willing to pay a finders fee if need be. Thanks Dave reply directly to easair@charter.net

I just bought the new parts inventory of a closed former equipment dealer in Tn. and Farmtrac was one of the tractor lines they carried. I have hundreds of small parts that I have started listing on eBay but if any of you guys need a part drop me a line and If I have it I can let you have it at...

A lot of things I go to lift with my 14LA loader on my TC34DA are just over the threshold of lifting capacity. Likewise, when I am using the 758C backhoe sometimes I need just a little more umph to get the job done. Probably 15 to 20% would be sufficient. Is there anything that can be done to...

Because of age related related physical problems I am needing the Right (PN 718709066) and the left (PN 710709046) steps for my TC34DA. They list for over 700.00 and the cheapest I can find them is Surry Equiptment and they are still over 500.00. I could fabricate a set if I had patterns to go...

I have had a 5000 gas tractor for nearly 30 yrs and the carb needs rebuilt again. I bought a rebuild kit 25 years ago made by Holley and I saved the box just so I could get another in the future but that part # is obsolete now. The 5000 carb is different than the 2,3 and 4000. Some suppliers...

Does anyone have an idea of how much weight can be lifted by a 758C backhoe on a TC34DA at say 6' from the rear of the tractor. Just trying to get an idea of how much I can lift if I bur a thumb for my BH.

There is a set of repair manuals on Ebay now. They are used and a little pricey in my opinion (214.00 I think) but still better than the 400.00 CNH wants for them. These only surface on Ebay every 6 months or so. I already have a set that I bought on Ebay a year or so ago new that were cheaper...

There is a complete set of service manuals for these tractors on Ebay for 189.00. That's not too bad considering they are about 400.00 from the dealer. I bought mine on Ebay a yr. or so ago and they are worth that if you plan to do your own service. Dave

I have a TC34DA. Normally you can get off the tractor and leave it running if the park brake is set and the range selector is in neutral. Now it cuts off when you do these things making it impossible to get off and leave the engine running. Any ideas? :confused:

I have a TC34DA with a 14LA FEL and a 758C BH. Does anyone know the lifting capacity of the backhoe ? Thanks ..Dave:)

My tractor just turned over to 50 hrs. and I was changing all the filters yesterday. The first filter I took off was to the hydrostatic tranny. To my disbelief the tranny is full of water! Now I know why it growls so bad. It is a 2006 model and it sat outside at the dealer till March of 2008. I...

Be advised that all 3 locations of Tarheel Tractor & Equiptment in western NC are now closed. This is the Lenoir, Conover & Deep Gap dealers. I called about getting some warranty work done and was promptly told that they were no longer a New Holland dealer and hasta la vista! Now the closest...

A complete service manual for these Boomers has been listed on Ebay. I am NOT the seller. These manuals are about 400.00 from the dealer. The bidding is starting at 39.95. This is the first one that has come up on Ebay since I bought mine maybe 4 or 5 months ago. These things are as rare as hens...

My neighbor cut down a healthy red oak tree today. The butt is 20" to 24" across. I have dug out smaller stumps but nothing like this. I have a TC34DA with the 758C BH and a 9" wide bucket for stumps. Do I have a chance or not of getting this thing out? C'mon, give me some chatter. Dave

Can anybody identify this Ford tractor, possibly an 1801? Dave

My left fender (as sitting on the tractor) droops down on the outside rear corner. It has been this way since I bought in new in March. When looking at the tractor from the rear it really looks bad when you compare it to the right fender. My wife has even made snyde comments about it.:mad: I saw...

I have only 30 hrs now on my tractor. Ever since it was new most of the time it is hard to shift from neutral to any range. The only way I can get it to shift is pushing in the clutch(which is what you have to do anyway) and rock the foward/reverse pedal back and forth a few times and sometimes...

The last time I bought off road diesel it was only .10 cheaper than on road. I can buy K-1 kero for 4.45 gal. I had a good friend who is now deceased that bought an Isuzu pickup when they first came out with a diesel motor in it and he ran nothing but K-1 kero in it for all the years he had it...

I have a new TC34DA with the optional grill guard, 14LA FEL & 758C BH. According to the owners manual you can install 2 Cast iron front weights that are compatable with the grill guard. There are 2 sizes of weights, 57lb. and 100lb. There is no mention in the owners manual that restricts the 100...

I recently purchased a new TC34DA. I always run the Mfgs. tranny/hyd. oil in all the different tractors I have. The IH Case equivelent of the model I have would recomend Hy-Tran Ultra and since the 2 tractors are the same it would make sense to me that Hy-Tran would suffice in my NH. I have...

There are times when it would be easier in tight places to lift something with the BH instead of the FEL. I don't recall any statisics on lifting power, just digging force in lbs. The dipperstick has appx 2500 lbs of digging force. Could one conclude that the hyd. cylinder could lift the same...

Does anyone know where I can purchase a service manual for my:) TC34DA except the 300.00 + one at the dealer? Also, I am looking for some Hew Holland decals appx. 1 3/4" or 2" high and appx 18" to 24" long . Any help appreciated. Dave

As I look over the weight lifting capabilities of the 14LA on my TC34DA I see nothing which states if the figures include the weight of the 68" Q/A bucket or not. I am putting a tooth bar on it which weighs 100 lbs and I have no idea what a 68" Q/A bucket weighs but if the published figures...

I recently purchased a new TC34DA, 14LA FEL & 758C BH. I notice when using the BH that there are sounds of wrenching metal seeming to come from the undercarriage of the BH. It only does it when putting downforce on the dipperstick and crowding the bucket, just when there is a lot of force being...

I recently purchased a NH TC34DA with 14LA loader and 758C backhoe. I notice when using the backhoe that some metal wrenching sounds seem to be coming from the undercarriage possibly where the hoe is mounted to the tractor. It occurs only when the bucket is in the ground and being moved. My...