Search results

Gave up on DeWalt years ago when their batteries didn't last and they were over priced to replace.

D=Fsquared D is degree of difficulty, F is feet, after about four feet forget it.

Better put an orange flag on it so you can find it.

So could this work to install a pipe in an existing pond dam ?

I'd sure like to know how this turned out, I've got the same issue.

If you 'v got a good equipment trailer, load that brush hog on it and haul it to the nearest scrap yard.

When I'm checking fences or cows on the SXS I always have my battery chainsaw, if I know there is a big tree or several down I take the gas Stihl. But am always amazed at the capacity of the battery saw, and it starts a lot easier.

My SXS is probably the last tool I would give up on my farm.

Ask them where the tractor is located and when they reply whereever (usually far away) tell them your cousin who is a deputy sheriff in that county will stop by and check it out for you. I have done this several times and never here from them again.

https://www.bigskypipeandsupply.com/gallery-2/

Bad or intermittent ground somewhere.

Well it's been over 20 years hope you got it fixed. I need a wiring diagram too.

Sorry can't help, my D40 has a limit switch acting up too and I can't find which one, looking for a wireing diagram.

any other colors besides yellow? is that bed plastic or sprayed on bedliner? you started it at -25, thats amazing.

they sure look impressive and the specs and warranty look good. Would like to here from actual owners (farmers/ranchers) or point me to a good unbiased review.

Never tried uploading a picture but here goes. Anyway this is a true working UTV

Never had a skid-steer but have a 300 acre farm that needs a lot of cleanup, fence row cleanup, new fences, couple of old buildings to take down and lot of brush to clear. I keep hearing that a case 1845c is a good low budget simple reliable machine. My questions, I want to get a hydraulic brush...

Never had a skid-steer but have inherited a 300 acre farm that needs a lot of cleanup, fence row cleanup, new fences, couple of old buildings to take down and lot of brush to clear. I keep hearing that a case 1845c is a good low budget simple reliable machine. My questions, I want to get a...

Going to make or buy a tow bar to tow UTV behind tractor, baler , pickup or whatever. What are the precautions like transmission, CVT belt or what to watch out for.

If I was in the buying mood for a UTV I would have to check these out. I know they ain't no JD or Kabota but looks like a lot for about half the money and made in USA! American SportWorks LANDmaster LM650/LM700 Gasoline Powered UTVs

I use a Folgers plastic container, but I suppose any brand will do. I usually have a 12 ft but it will store two twelve footers.

My 5310 sits for sometimes a month or two at a remote location. Twice I have found it with an almost empty fuel tank caused by leakage in the fuel line under the tractor. The first was just rotten cracked line, the second time I found a hole in the new line just where it goes over the...

Thinking about getting a plow for my Honda Rancher, how does an ATV do pushing snow?

Anybody got a feel for how important this is? It's a real PITA for me to get this done because of where the tractor is located. 600 Hour Adjust Engine Valve Clearance Ask your John Deere dealer to make engine valve clearance adjustment and inspect fuel injectors. I wonder if 99% of the time...

Is there anyplace in the Internet where you can "Build or Price" out a Kioti like you can a JD or caseih? Just for comparison purposes.

I can't believe all the people that never remove their loader, I love my loader and use it a lot, but when I'm doing anything else especially brush-hogging I remove it. Am I the only one that does this?

Once again this is why you don't hook to any point above the drawbar. He was lucky, only a busted leg and a broken cheekbone.

Hey Jimmy Joe hows that new DX40 working out, any issues? I'm still looking for the right deal to update my D40.

I have a Brave TM93 (I think) 3 point hitch splitter that uses the tractor hyds. The control valve is an Energy Products with 1612C stamped into one end of it. It is leaking fluid and I want to rebuild it. Anybody know where I can get parts for it. The Energy website shows products but no...

Anyone have any recommendations for a caseih dealer in Missouri (North or Northwest). I am kinda interested in a d40 or d45. My two closest dealers aren't interested, Power Implement at Lamar won't even return my calls and the other dealer at Holden dosen't seem interested either. I know I...

I recently test drove a JD4320 (150 hours on it) and was surprised at the noise level of the engine, very noisy in my opinion. Compared to my caseih d40. I only ran it for about 15 minutes, do the quiet down as they get warmer? I suppose you get use to it.

Any place on-line where you can enter a tractor serial number and get info on year built etc?

My old Schumacher finally went down, need to replace it with something reliable to maintain everything from lawnmower to tractor including deep cycle boat battries. I have heard the new digital chargers aren't too reliable, any thoughts? would like to spend less than $100.

Anybody know where can get a tire pressure gauge for low pressure, say 20 lbs full scale. Trying to read 10 or 12 lbs on a 50 lb gauge is not very accurate. I would prefer a dial gauge.

How come most of the time when someone post to the case-IH forum someone is quick to tell him that he really should be in the Ford/NH forum, especially a neewbie, I have a CaseIH not a New Holland, don't care who built it, it's red and says CaseIH on it (D40) If it was blue and said New Holland...

Just priced the kit (710366046) at two different places, $512. About twice what I thought would be. Is there anyplace on line that gives even a little break on price?

Just kicking it around but thinking of tradeing my 2001 D40 (450 hrs) for new DX40. Dealer says about $10k difference. How does that sound? I think a little high but really don't know.

My D40 does not have a temperture gauge but does have a knock-out panel in the instrument panel for one. Would it be possable to add one?

Certainly a sorry website compared to the John Deere website. Almost no good information and you can't price a tractor at all. Just one more reason JD is eating their lunch. I was intrested in a DX40 or 45 but not now.

Just sold my John Deere 870 which I absolutely loved. Got a great deal from a friend on the D40. Hope I'm not sorry.

Going to park my 870 out by road with for sale sign on it. Perfect shape with 440 loader and almost new R1 rubber. Do you think $10,500 is about right? Ran into a deal I couldn't turn down.

Speaking of blowers, was talking to one of the guys on rural fire dept, he said backpack blowers are better than water in some cases fighting grass fires, just get ahead of it and blow back toward burnt area. I don't have one but something to think about, its sure getting dry around here.

I know of at least two web sites where I can price John Deere equipment, are there any CASE IH web sites? It gives a $base to start from. I am kinda interested in a DX45 and loader

JD870 went to use it today clutch appears to be stuck, has no effect when pushed in, if start in gear it moves but can't stop with clutch. I put the loader against a tree in attempt to break it loose, no luck. Last time I used it about about a week ago worked fine. Has this been reported as a...

Bush Hog ZTR\'s Anybody checked Bush Hog's ZTR's, I have and am impressed, I am looking to maybe replace my Grasshopper 721 and have been comparing. They are certainly well built and seem to be priced resonable, my dealer quoted $7400 for "61 25HP Kholer

I finally have had enough of the fuel and tempertaure gages working intermittenly and decided to pull the instrument panel only I can't get the steering wheel off. I removed the big nut but don't see any way to attach a puller. Has anybody done this?

My temperature and fuel gauges have went from working sometimes to never working. Has anybody else had this problem and if so what is the fix? I have checked fuses, and pushed and pulled on every cable and connector with no effect.

Thinking about buying a bench type chainsaw chain grinder for a friend to help get him started in business (and to help me out) Would like input on what to look for, what is good and what is not so good. Anybody got the Harbor Freight model?

I would like to see a ZTR forum added here, I think there is plenty of interest in ZTR's and a lot of questions and answers could be provided by you guys.

Looking at a B8200 4wd HST with 60" belly mower, appears to be in excellent shape, hour meter busted, I need some idea of what they are selling for. Also would like the good and bad of this model. Also have the same questions on a B7100 4wd hst with 60" bellymower.

Am I the only one who thinks Stihl chain saws are overrated? Based on owning one and being around several I find them hard starting temperamental unreliable pieces of equipment.

I have a set of turf tires mounted on rims 8 bolt, 355/80 D20's that came off my 870 that I would sell for $100, know should put this in classified but not sure how.

Anybody here bought one yet? I have looked at them and I'm interested. Kinda confused about them being excately alike except for horsepower. Why not buy the lowest HP and turn up the pump, thereby saving a few thousand? Know I must be missing something.

While checking out the oil shelves at local Walmart I found way up on the top shelf in five quart size, Supertech 100% full synthetic oil in 5W-30 and 10W30, the colors were like Mobil1(silver-gray), the price was $11.00 and change. Anybody tried this?

Stopped by local dealer yesterday, very intrested in a 990 with 430 loader to replace my 870. He proceeded to tell me why I didn't want a 990 but that I really wanted a 4410. I explained to him that I thought I had done my homework and was not interested and if I was it would be more likely...

Fuel and temp gauges quit working after I changed battery.

Just replaced battery and now no temperture or gas gauge, any ideas??

Just bought a 870 JD with turf tires, want to convert to ag tires. Any advice, any web sites to compare and shop on?