Search results

Hey guys Used tractor a couple weeks ago to bushhog. Has not been used since. Seemed to run fine then. When I went to start it yesterday it won’t turn over at all. Lights work, makes clicking noise when turning key. But won’t turn over at all. Tried to jump and nothing so not battery...

Hello guys I am posting this as a unpdate to a thread from last winter. I have a 2010 B2920 with only about 130 hours on it. Last winter I had noticed an odd sound during times of plowing snow with the rear blade. It sounded a bit like sucking the last few drops of drink out of a cup with a...

Hey guys I have a cub 2500 series. It is working ok but 2-3 times during the course of a 1 hour mowing session the blades will just cut off. I turn them back on and go about mowing no problem. It has also blown a couple fuses this year. About a year ago the front PTO belt busted and...

Hey guys Went to attach the mmm today, get it installed but the deck will not raise all the way, only a small amount. Took mmm back off, arms seem to raise and lower fine. Put mmm back in an nothing. 3 point appear to be working fine. Have also had difficulty getting arms to lock into top...

Hey guys I posted on this a few weeks ago. I have continued to have an odd noise coming from the front of my tractor lately while plowing snow. It seems to be only when tractor is moving, never when idle. Happens in forward and reverse. Tractor has been in 4wd. The sound immediately stops...

Hello all Have a 2010 B 2920 with 120 hours. I was plowing some snow with my rear blade today and noticed what I think was a rotational noise coming from the front end possibly front axle. It does not occur when at idle. Starts to occur sporadically after about 10 minutes. Not consistent...

Hey guys I have a B2920 with 110 hours. I need to top off the coolant, any specific type I need to get. Thanks in advance

Hey guys Need help with a dumb question. B2920 has run like a champ since I had it. Only 115 hours on it. I ran it for an hour or so yesterday not problem. I then hosed off the dirt and gravel dust and put it back in the barn. Now it wont start. All electrical elements work ok. Tractor...

Hey Guys I am thinking of buying a post hole digger for my B2920. This will not get a great deal of use but will be handy when needed. For now I am going to use it to dig holes for a deck that I will be building. In future will use it for a shed and likely a fence around a garden. I will...

Hey guys Need some opinions on price on a used B2920. I purchased this tractor in 2010 new. It has FEL, MMM, Woods box blade on it. It has 100 hours on it and is in fantastic condition. All routine care has been done. What would be a fair price to put on this for private sale? Thanks...

Hey all I dont know very much about lawn equipment, I am posting a novice question. I have a 2005 GT2521 that I have had for about 3 years, it was purchased used, now has only 150hrs on it. I mowed with it several times this year with no problem. I have changed oil and transmission filters...

Hey guys I decided to change the oil on my Kubota B2920 the other day. I had the original 50 hour service done at the dealer but decided to begin to do some of this myself. I am relatively new to the tractor world and am learning as I go. Anyway, the process seemed pretty straightforward...

Hey guys Have been mowing fine with this mower all year. Today it was mowing fine when all the sudden the blades stopped. I was then able to re-engage them and mow for another few minutes. They then cut out again. This happened repeatedly. Sometimes allowing me to mow for 5- 10 minutes...

I have read some of the threads about the MMM adjustment knob under the seat. It has been problematic at times, sometimes having a hard time getting it to rotate to the "top" setting. Generally, I can get it to work. Yesterday I went to mow. I set it at 3.5 or so. When I went to lower it...

Hello all I bought a used GT 2521 last year, it is a 2005 model I believe. It has mowed reasonably well, only had 70hours on it when I bought it. I went down to mow a few days ago and it would not start. Absolutely dead, not even a clicking sound when turning the key. I took the battery out...

Hello I have a 2005 or 06 GT 2521 with 48 inch deck that I obtained used about a year ago. It had only 70hrs on it at the time. At that time a new PTO belt was put on. It has mowed well for the past year. I have done the routine maintenance myself. Yesterday I was doing routine mowing...

Hello guys, I have a b2920 with 73 hours on it. I had the 50 hour service done in May at the dealership. I have not used the tractor in probably 6 weeks due to the change in weather and not needing to mow. I went to put the rear blade on it to get it ready for snow season this morning. I...

Hello I have had my B2920 for about 15 months now. It has performed well, and I have not had any problems with it. I have read some on here about the hydrostatic whine. My tractor does make sort of a sqealing/whining sound but typically this only occurs with initial takeoff and then...

I posted last week about some problems with my newly aquired Cub. Just to review I bought this used about a month ago. It had not been run consistently for about a year, but had only a total of 70 hours on it. It ran ok initially. Then I had problems with the low oil light coming on. I have...

Hello I recently got a used Cub GT2125 with 70 hours on it. It runs and mows great. Last week the "low oil" light came on. The oil level seems fine. I even changed the oil, oil level normal on dipstick but light remains on. Sould I worry about mowing with it, could it be something with...

Hello I have had my B2920 for about a year now. I now have 50 hours on it. I called my dealer and they quoted me around 300 bucks for the service. They also recommended that I change the transmission fluid even though Kubota says only the filter. This is an extra 75 bucks. I plan to do...

Hello Basic question here. I have a B2920 that I recently obtained. I have a rotary cutter to hook up. I also have a MMM that I have been using. Once I hook up the rotary cutter, do I have to disconnect the driveshaft to the MMM when I am using the rotary cutter? Thanks, Matt

What would be a reasonable price to pay for a GT2521 2005 with only 70 hours, 48inch deck I am looking for a used GT and there a couple available in my area.

Hi all I currently have a B2920 w FEL and 60in MMM. I have used this primarily for snow, gravel driveway maintenance, various landscaping/loader needs etc. I have discovered that it may be better to have a separate lawn tractor to use simply for mowing. Reason is when yard is moist the B w...

Hello I am relatively inexperienced with tractors in general. We built a house on a piece of wooded property with a long hilly gravel driveway- about 3/4 mile long. In May of 2010 I bought a Kubota B2920 to maintain the property. I have done well maintaining the gravel with a box blade, have...

I have read the other posts on this but most of them refer to box blades and not rear blades I currently have a Woods box blade that works well for grading gravel driveway etc. However, I want a rear blade for plowing snow. This will be the only thing I use it for. I saw some blades at TSC...

I am relatively new to the tractor world. You guys helped me decide on the 2920 and it is a great machine I have a 3/4 mile gravel driveway that I am trying to get the ruts out of, after the monsoon rain from the past week. The 5 foot box blade seems to be working well--however, I am...

Hello everyone and thanks in advance for your input. This will be my first tractor buying experience. Please excuse if some of my questions have been answered in other posts. I have decided to get a kubota and like some others on here, am trying to decide between a bx2660 and b2620 model I...

Hello everyone and thanks in advance for your input. This will be my first tractor buying experience. Please excuse if some of my questions have been answered in other posts. I have decided to get a kubota and like some others on here, am trying to decide between a bx2660 and b2620 model I...