Jim Thompson
Gold Member
- Joined
- Oct 25, 2009
- Messages
- 288
- Location
- Fleming Island,FL
- Tractor
- John Deere 2006 4320 CUT, 1970 Power King 2416
Not sure if this will help you in anyway,but I have attached these pics for you to look at.I also have a 1468 and thought maybe the photos would help in some way.If you need any more pics I will get them for you.
In pic #2, the box with the yellow wires is the voltage regulator. The blue wire to the left of the regulator may be the kill wire. Does it have a disconnect/ plug at the top of the pic? the view of the ign sw shows rust/ corrosion. Check the plug that connects to the switch. Also, if you determine that the blue wire is the kill wire, with the ign sw off, you should read a dead short to ground from the kill wire.
jim