Figured I would jump on this thread before starting a new one.
Have a 930D 2011 Grasshopper. Spline shaft
Just added a 512 2012--present electric lift Snowblower. Square shaft
We were able to take the spline shaft off the mower deck and shorten it a little and use the same one for mower and snowblower. Seems to work just as it should if that helps anyone.
I do have an issue and hope someone can help me. Our snow blower in the full down position holds about 1" above grade.
Before we modify:
1. Should not be this way and should sit on the grade with some play in the "strap" right? I do not think it is the adjustment we made on the PTO shaft. The slotted "straps" are at the end of stroke.
2. Anyone know of any adjustments that are to be made? Only thing I can think of is raise the "Deck Mount Bushing"
3. Any chance 2011 tractor and 2012 are not compatible for height without modifications?
Have a 930D 2011 Grasshopper. Spline shaft
Just added a 512 2012--present electric lift Snowblower. Square shaft
We were able to take the spline shaft off the mower deck and shorten it a little and use the same one for mower and snowblower. Seems to work just as it should if that helps anyone.
I do have an issue and hope someone can help me. Our snow blower in the full down position holds about 1" above grade.
Before we modify:
The Mower Shop, Inc.Electric Lift & Electric Spout Assembly - Grasshopper Lawn Mower Parts Diagrams
www.the-mower-shop-inc.com
1. Should not be this way and should sit on the grade with some play in the "strap" right? I do not think it is the adjustment we made on the PTO shaft. The slotted "straps" are at the end of stroke.
2. Anyone know of any adjustments that are to be made? Only thing I can think of is raise the "Deck Mount Bushing"
3. Any chance 2011 tractor and 2012 are not compatible for height without modifications?