corey9212
Platinum Member
Hello, I just bought a bale buster for cheap but the previous owner hadn't used it for a few years. The only thing he said was that he marked the lines in pairs (requires 2 sets of scv outlets.) I hooked it up and things aren't working properly.
Firstly the out riggers don't go down together (one goes down and the other goes up), secondly I have to press one scv foreword and the other backwards at the same time to run the hydraulic motor. I provided a couple pics one is how it's supposed to be plumbed and the other is how it's plumbed now. From what I have read (and it makes sense to me) is the first scv runs the motor going one way and the other way lowers the bale fork, the second scv is for the outriggers for stability while loading the bale.
Any help with what's going on and why and how I can fix it would be appreciated (I can provide actual pics if needed as well)
Thank you in advance.
Firstly the out riggers don't go down together (one goes down and the other goes up), secondly I have to press one scv foreword and the other backwards at the same time to run the hydraulic motor. I provided a couple pics one is how it's supposed to be plumbed and the other is how it's plumbed now. From what I have read (and it makes sense to me) is the first scv runs the motor going one way and the other way lowers the bale fork, the second scv is for the outriggers for stability while loading the bale.
Any help with what's going on and why and how I can fix it would be appreciated (I can provide actual pics if needed as well)
Thank you in advance.