conestoga_days
New member
- Joined
- Jun 1, 2009
- Messages
- 3
I have an IH 46 baler that isn't knotting like it did in the past. I got it to knot every time now but the bales are not straight. I tried tightening the bale tensions but it didn稚 work. I can watch it knot the bale and as the twine is pulled out of the billhooks the one side pulls out later than the other side. I had trouble with the bad side cutting the twine also but I adjusted the blade and it cuts now but when it knots the twine seems looser on that side causing the bale to be crooked.
I hope I am making since but since I priced some of the suspected bad part, I decided I wanted to make sure the part was bad before I gave up my arm or leg.
TIA
I hope I am making since but since I priced some of the suspected bad part, I decided I wanted to make sure the part was bad before I gave up my arm or leg.
TIA