OP
OkieFarmer78
Member
- Joined
- Jul 24, 2022
- Messages
- 25
- Tractor
- John Deere 6105M
Correct. The EHC was one from a different, identical tractor that I was given to try, so not out any $. While it’s possible it’s also bad, I doubt it has a circuit failure in the exact same way as the original.Doing that is obviously something that he could try but until he gets 12 volts to the solenoid he knows it's not going to work. My guess now is you have something going on in the wiring harness. Or there's something going on in the controllers.