flwiii
Gold Member
I ran my 2305 that way also. I also was 3 quarts low. The dealer told me that the technician probably did not top off the fluid after the installation of the FEL. They gave me a gallon of the hydro fluid and as I said it took 3 quarts to get it to 1/2 to 3/4 in the sight glass. They told me that it shouldn't have damaged anything, just very noisy. There was still plenty of oil to keep it from overheating. Make sure though that you are on level ground, all implements are down and it has rested 1 hour before checking the oil level in the sight glass.