Scooby074
Super Member
Dont put the recept in the top. Metal shavings are bad
i wired mine under the edge of the top so its close by but out of harms way
]Leave a lip around the top for clamps
Casters are ok. Just get good ones with brakes or add table brakes to yours. THe inertia of a heavy table will help.
Mines probably 5x6 of 3/8 plate. Plus the legs are heavy wall. I also store all my short steel on the table so im guessing it weighs at least 900 lbs.
I welded several 2" receiver tube around the perimeter to make for modular attachments. My large vise, bender, anvil are all mounted to 2" tube. I can move them around or remove them for storage as needed.
sorry I dont have any good pics on my comp. This is the best i have.
i wired mine under the edge of the top so its close by but out of harms way
]Leave a lip around the top for clamps
Casters are ok. Just get good ones with brakes or add table brakes to yours. THe inertia of a heavy table will help.
Mines probably 5x6 of 3/8 plate. Plus the legs are heavy wall. I also store all my short steel on the table so im guessing it weighs at least 900 lbs.
I welded several 2" receiver tube around the perimeter to make for modular attachments. My large vise, bender, anvil are all mounted to 2" tube. I can move them around or remove them for storage as needed.
sorry I dont have any good pics on my comp. This is the best i have.