KevinLove
New member
I borrowed this MF GC2310 from my boss to do some tilling and a few other things around my property. Used it for a couple hours yesterday and today with the bucket and everything worked fine. Slight drip off the bucket lines. Went to start using the tiller attachment and couldn't get it to engage without bogging down the motor, I saw that the fluid was below the sight glass and added a bit to bring it full. Started it back up and now no hydraulics work at all. No response from bucket, 3 pt, or any PTO. Am I missing a pressure relief or air bleeder? From scouring the forums I would have to guess its not air, as these systems bleed themselves? I think I did overfill it when I added hydraulic fluid but I then drained some out so its about half way up the sight glass. Any help would be great, spent a couple hours messing with it, with no luck.