Dealer Reputable Dealer

[kenmac]

In my search I found this guy in Alabama ...might not be that far.... check him out
YM 2500 COMPLETELY REFURBISHED WITH NEW LOADER AND ROPS - eBay (item 160420249816 end time Apr-10-10 13:52:46 PDT)

Be carefull buying a VN tractor. It may look very nice on the outside but, Who knows what's on the inside. May have different size pistons, valves,
etc, At 1 time Fredricks had a dealer that he sold to in Miss. I would give tom a call & see if he still has a dealer in Miss. You might also check out Danny Parker. he sells a few tractors & he's in AL....Funny thing is. He says he stands behind his tractors then, says to buy parts from hoye tractor.. Not knocking hoye. Just saying he must not have parts to repair the tractor under warranty

 

[rmasonjr]

Good info guys - thanks! I think I have a good handle on the model/implements I want, just need to find someone relatively close to get the deal done...

Thanks!
Rob

 

[clemsonfor]

OK i never said that Steve or any other reputable dealer would not ship to you, but my point was if this guy cant do the work himself he either will need to FIND and PAY a local mecanic to do it (labor not part as it is shipped from dealer at no charge) or TOW the WHOLE tractor BACK to GA to for warrenty work. I am not saying he will not ship parts, just pointing out something, there will be a cost involved with warrenty work as you will either need to PAY LOCAL guys to do it or TOW it 5 hours to GA. Sorry i feel like im repeating myself.

On another note. Hoye calles the 2200 a bastard tractor with little parts support (2210 i think is a differnt situation) and on here some of the dealers say that they know of no reputable dealers selling 2200 just the vietnamesse refurb guys. I would double check i dont see why Steve would sell a tractor will limited parts support.

-Nate

 

[rmully]

Best Used Tractor sent me their price list .... what do you guys know about them ?? Do they do a good rebuild ? They would charge me $550 shipping from their plant to me in NC

4WD Tractors:
Yanmar 2820D 4WD 34 HP power shift / power steering $8525.00
Yanmar 2610D 4WD 33 HP power shift $7175.00
Yanmar F235D 4WD 28 HP gear drive $7825.00
Yanmar 2420D 4WD 29 HP power shift $7125.00
Yanmar 2402D 4WD 29 HP gear drive $7025.00
Yanmar F24D 4WD 29 HP gear drive $7190.00
Yanmar FX24D 4WD 29 HP power shift $7400.00
Yanmar 2310D 4WD 28 HP power shift $6725.00
Yanmar FX225D 4WD 27 HP power shift $7825.00
Yanmar 2210D 4WD 27 HP power shift $5775.00
Yanmar 2210BD 4WD 27 HP power shift $5925.00
Yanmar 2000D 4WD 24 HP gear drive $5475.00
Yanmar F20D 4WD 24 HP gear drive $6975.00
Yanmar FX20D 4WD 24 HP power shift $7200.00
Yanmar 1810D 4WD 22 HP power shift $5950.00
Yanmar 1820D 4WD 22 HP power shift $6350.00
Yanmar 1802D 4WD 22 HP gear drive $6235.00
Yanmar 1800D 4WD 22 HP gear drive $6350.00
Yanmar F18D 4WD 23 HP gear drive $6775.00
Yanmar FX18D 4WD 23 HP power shift $6975.00
Yanmar 1700D 4WD 21 HP gear drive $5325.00
Yanmar 1702D 4WD 21 HP gear drive $6000.00
Yanmar 1720D 4WD 21 HP power shift $6125.00

2WD Tractors:
Yanmar 3110 2WD 38 HP power shift / power steering $6525.00
Yanmar 2620 2WD 32 HP power shift / power steering $6875.00
Yanmar 2620 2WD 32 HP power shift $6575.00
Yanmar 2610 2WD 32 HP power shift $5875.00
Yanmar FX24 2WD 29 HP power shift $6225.00
Yanmar 2402 2WD 29 HP gear drive $6050.00
Yanmar 2420 2WD 29 HP power shift $6250.00
Yanmar 2500 2WD 30 HP gear drive $5650.00
Yanmar 2610 2WD 32 HP power shift $5875.00
Yanmar 2310 2WD 28 HP power shift $5500.00
Yanmar 2301 2WD 28 HP gear drive $5450.00
Yanmar 2210 2WD 27 HP power shift $4650.00
Yanmar 2210B 2WD 27 HP power shift $4825
Yanmar 2000 2WD 24 HP gear drive $4250.00
Yanmar 2000B 2WD 24 HP gear drive $4450.00
Yanmar 1810 2WD 22 HP power shift $4900.00
Yanmar 1700 2WD 21 HP gear drive $3900.00
Yanmar 1702 2WD 21 HP gear drive $5100.00
Yanmar 1720 2WD 21 HP power shift $6125.00
Yanmar 1700B 2WD 21 HP gear drive $4125.00

Smaller Tractors:
Yanmar 1300 2WD 16 HP gear drive $3550.00
Yanmar 1401 2WD 17 HP gear drive $3800.00
Yanmar 1401D 4WD 17 HP gear drive $4500.00
Yanmar 1500 2WD 18 HP gear drive $3725.00
Yanmar 1500D 4WD 18 HP gear drive $4275.00
Yanmar 1601 2WD 20 HP gear drive $4450.00
Yanmar 1601D 4WD 20 HP gear drive $5500.00
Yanmar 1610 2WD 20 HP power shift $4625.00
Yanmar 1610D 4WD 20 HP power shift $5675.00

Power Steering: Please be advised Yanmar tractors of less than 35 HP seldom have power steering. The tractors listed on the price sheet with power steering are factory original. We can add power steering to any tractor for an additional $500.00.

Sun Shade / Canopy: We can install a sun shade on the tractor for an additional $315.00. (Mounts on the ROPS roll bar)

Front-End Loaders / Information: We can install a front-end loader on any 4WD tractor and all 2WD tractors 24 HP and above. The front axle on smaller 2WD Yanmar tractors of less than 24 HP is not rated for the work capacity of the loader.

Front-End Loaders / Prices:
The loader can be purchased mounted on the tractor or at a later date. Koyker front-end loaders feature quick-attach for off and on the tractor, joystick control and full dump on the bucket. Koyker is manufactured in Lennox, SD. A new Model 80 Koyker front-end loader can be installed on 16 to 25 HP tractors for an additional $2995.00. A new Model 120 and Model 125 Koyker front-end loader can be installed on 22 to 30 HP tractors for an additional $3195.00. The Model 140 loader can be installed on 28 to 35 HP tractors for an additional $3250.00. The Model 155 and Model 160 loader can be installed on 35 to 50 HP tractors for an additional $3550.00

Backhoe Attachment / Prices: We currently stock the Koyker Model 660 backhoe with a 12 inch bucket. Digging depth: 6ft. 6in. $4995.00 shipped on a pallet. $5200.00 mounted on the tractor.

3-point rear mount attachments:
New 42 inch rotary mower: $590.00
New 48 inch rotary mower: $600.00
New 60 inch rotary mower: $600.00
New 72 inch rotary mower: $750.00
New 48 inch finish mower: $1250.00
New 60 inch finish mower: $1350.00
New 72 inch finish mower: $1450.00
New 40 inch economy rotary tiller: $1025.00
New 48 inch economy rotary tiller: $1095.00
New 49 inch rotary tiller: $1225.00 (recommended for tractors 16-22 HP)
New 57 inch rotary tiller: $1335.00
New 65 inch rotary tiller: $1475.00

New Post Hole Auger (9 inch auger) $525.00
New Post Hole Auger (12 inch auger) $550.00
New 48 inch economy box scraper: $260.00
New 60 inch economy box scraper: $310.00
New 48 inch heavy duty box scraper: $310.00
New 60 inch heavy duty box scraper: $380.00
New 72 inch heavy duty box scraper: $450.00
New 48 inch economy rear blade: $185.00
New 60 inch economy rear blade: $200.00
New 72 inch economy rear blade: $225.00
New 48 inch tandem adjustable disc: $620.00
New 66 inch tandem adjustable disc: $675.00
New 60 inch rock rake: $400.00
New 72 inch rock rake: $450.00
New 24 inch reversible scoop: $265.00
New hay spear: $135.00
New boom pole: $125.00
New 500 pound spreader/broadcaster: $375.00

 

[kenmac]

I don't kmow anything about them. All I can say is they list a 3110 with 38 hp. I have a 3110 and the engine plate list 31 hp @ 2600-2800 RPM

 

[Smoody]

prices are to high, a 2000 series tractor is a $3500 tractor max. I can buy them all day around here for $2,000, your best bet is to find a good used one (as in from a individual), unless you don't care to save money.

 

[clemsonfor]

Get the carolina trader (a columbia, sc based sale ad) I got one in rock hill yesterday so i know they get up toward charlotte. I think there was at least one unrefurbed yannie. not sure on the price but had a loader, i think $4k ish? but i wasent looking really just for implements.

 

[SpaldingTractors]

Hi Guys ...I spoke to Steve and he has 2 tractors with a FEL ...a 2200 2wd and a 1700D 4wd (smaller is better for me) either one for $6900. Now i would have to add shipping so it adds up real quick. I spoke to Stomer Tractor and he is getting out of the tractor business and selling parts because of all the problems he has had with the Vietnamese rebuilds.... now I am even more confused.

The tractor we talked about was a 2210B with a koyker loader that is 5995.00 was a tradein on a
2610 ,I don't sell 2200s. tks steve

 

[clemsonfor]

I figured if we talked about you enough we would hear from you steve. Again steve im not trashing you or your business, just making a point. I infact sometimes wish i purchsed from you, but im only around 2 hours away. I also figured you did not deal in 2200s as everything i hear is that there is little parts other than common stuff that is availible for them and that most that sell these are selling VN rebuilds as they are the only one that really deals that model.

-Nate

PS any spring deals on tillers, i checked with you a couple months ago, but am tring to still find a US type tiller for a deal.

 

[normde2001]

I don't kmow anything about them. All I can say is they list a 3110 with 38 hp. I have a 3110 and the engine plate list 31 hp @ 2600-2800 RPM

Japanese, (gray market), tractors use pto hp. You have to add 20% for actual engine hp.