Reviving an old thread here but it has so much good information in it. It's exactly what I want to do. I just have 1 question...
I really like the idea of moving the plow back closer to the tractor but, I'd be plow dirt / stone driveways with it. I'm leery that the little bit of down pressure that is provided with the FEL in float will cause the plow to dive like a submarine. Especially during those early and late storms where the ground is as soft as sand. Thoughts and experiences of those that have done this would be great.
If I need to keep the pivot I'm wondering if I could somehow mount the pivot say 12" behind the QA plate. The issue would be that supporting the pins from behind the QA plate would cause a lot more stress on the welds.