Anyone have experience to share (good) and/or pictures (better) on where this is located? For SyncroShuttle it's not the same place as the PowerShuttle. I found no reference of it (for...

Hi, does anyone have advice on where to get a front windshield for a 04 Massey Ferguson 1533 with the deluxe cab. Dealer wants $900 + 300 delivery + 400 installation.

Good day , looking for the psi setting for my pressure relief valve for my 2008 massey ferguson 1533 hydrostatic. Thanks

I've owned it since new and it just started overheating now that winter is over and I'm starting to use it. I did a radiator flush and added new coolant (mixed it 50/50), installed a new...

Hi. I’m looking for some help, I have an 05 MF 1533 Power Shuttle. I experiencing a lack of power with the hydraulics. Getting up to speed takes awhile. If I drop my Gannon down, it just about...

I have a Massey Ferguson 1533 year 2006 It's is overheating to a the max and past I replaced the Thermostat flush the system with water. Still over heats less than 15 minutes what else could...

I don't like double posting but no one is responding in the repair thread sub-forum so.... One of the hydraulic lift lines to the loader caught a branch and ripped the hose out of the mating...

One of the hydraulic lift lines to the loader caught a branch and ripped the hose out of the mating coupler. No damage was done to the hose. We are unable to get the coupler to lock in and...

I need to know what all has gone taken off the tractor to break it in half. It is a MF1533 Synchro shuttle. Do I need to remove the fuel tank and floorboard and dash? What is the easiest way to go...

Anyone have a video on replacing. Looks pretty straight forward but thought there might be some tips that are not apparent. Thanks!

Tractor won't start. It's Challenger MT265 which is a twin of the MF 1533. Tractor has just under 400 hours. I have eliminated the battery and neutral switch. There must be some wiring issue or...

Hi, I have an Agco challenger MT265B aka MF 1533. I haven't use the tractor for a while. Just notice that the HST petal won't return to neutral position. I can't shift into gear unless I try...

The lower fork (6241734M91) on my assembly is bent and I wanted to just cut off that M20x2.5 left hand threaded bolt and weld another bolt on it, but it can't be found locally, so my options are ...

I have a neighbor that has a Massey 1533 and our of curiosity I looked up the specs on the tractor (as I have on many other tractors). Tractordata has the Breakout force listed as 1841 lbs and...

My 1533 SyncroShuttle will not crank. I took the risk and purchased a download manual ($25 for 711 pages, so far seems worth it and includes electrical schematics) I have tested multiple things...

Hello, has anyone had this issue before, control valve on my 1533 leaking from what looks like a small plug or rivet next to Allen screw

My luck, bought a cab tractor last week and was checking it all out the second day I had it. When I started to raise the hood which i had raised a couple of time already the windshield exploded...

I am looking at a 2005 Massey Ferguson 1533. It does not have a front loader, or the joystick/hydraulic ports for one. I am looking for a fair price to offer, keeping in mind that I intend to buy...

Bought new 2005 in April '06. Been perfect since w/850 hours until yesterday. Hauling mulch and on 3rd load the engine started to die. Kicked in clutch and rpms surged and then died. I've checked...

Hi, I am looking to purchase my first tractor. I have a small piece of land (10 acres) and want a compact tractor to mow the field, but also want a front loader. I stumbled on a 2005...

As most know I was in the market for a 40-50HP tractor, and finally settled on a deal with a dealership on a new Kubota MX5200. Well as most know things change in life and my wife and I will be...

Hello, I have a 2005 MT265B with ML30 loader. I recently replaced a leaky hose on the loader cost about $100 from the dealer. Now, 4 other hoses starts to leak and the rest have cracks and looks...

Any idea on what someone should pay for a 2011 Massey Furgeson 1533 in very good shape with 250 hours, a loader, and hydrostatic?

Happy New Year, folks. I need to remove the gas tank and heat shield on my MF1533 with cab and A/C - Heat. I've got the tank drained, fuel/return lines disconnected, muffler removed and...

I've got a 2006 MF-1533 with FEL that I bought new. It only has 358 hours on it. Shed kept. I use it for variety of utility and gardening needs. Started it up the other day and drove it up to...

I have been looking on and off for a little larger compact tractor with around 28hp pto. The following is first reasonable priced sale I've come across. It's a local private sale for a 1540 with...

I have a massey ferguson model 1533, it will turn over but not start, replaced fuel filter,checked fueses, still does not start? Anyone know what it could be?

I am adding a third function to operate the jaws of a new grapple. I believe the steel line in the attached pic is the power beyond line. Could one of you knowledgeable of the MF 1533 HST verify...

I have a MF 1533 shuttle shift tractor with FEL. My problem is the engine will not turn over with the key. I turn the key on and the fuel pump runs, and the fuel shutoff solenoid opens. When I...

Hello all, Question: anyone out there know how to remove/replace front axle bushings on the 1533 tie rod ends? I have the bolts off, but can't tell if the nut is threaded all the way to the joint...

A club I belong to owns an MF 1533 with I believe a DL120 loader. The bucket curl and dump work fine. The loader up works fine. The loader down is a problem. To lower the loader, I have to...

Maybe someone can help me. I have a MF 1533 diesel tractor. Today I did my walkaround checked the oil and cranked it up. Drove over to the rock pile and scooped a bucket full and headed up the...

I have a MF 1533 shuttle shift. A couple of days ago I was bush hogging and stopped to talk to my wife. I shut the tractor off and lowered the bush hog and then the FEL but the FEL did not move...

Where is the hydraulic bleed nut on the 1533? The owner's manual picture is not useful in locating the right place to bleed the hydraulics after changing the filter and oil. Thanks, Bruce

Can any one tell me the oil capacity on a M.F. 1533?:confused2:

Just picked up a "new to me" MF1533 (350hrs) with 1525 loader, 5 ft rotary cutter, and 7 ft blade. I have learned a lot already from the website but am doing all the filters and fluids and had a...

I hit stump with my2005 Massey 1533 last night and the lower spline end of the steering shaft came out the knuckle that runs up under the front and now it seems to be about an inch short and not...

I bought a MF 1533 cab tractor off Craig"s list. It had 360 hours and I sure none of the oils and filters had been change except maybe engine. Since I did not have a manual I took it to a dealer...

Has anyone purchased an aftermarket seat for a 1533? its a 2007 model I just bought one and the seat is toast from sitting outside all the springs are broken and the foam is disintegrating. I...

I have checked the gear lever and in neutral the shaft turns free, in forward position pto will not turn. When I turn the yellow knob, the indicator light on the instrument cluster comes on and...

Lifts okay ,but when I put on bucket or forks to push down the bucket or forks just come up . Another words it ain't stiff anymore. If you tilt bucket all the way down and try to go backwards...

Posted this in another thread, but hasn't had any hits yet. Had an issue last weekend with this tractor. Everything was find for a while and then when put into reverse, it is like the gears in...

My diesel MF will run for a few hours then lose power and barely run, engine will surge for a few seconds and back to barely an idle or stop. If I let it sit for a few hours it will run fine for a...

My 1533 has begun to act like it is starving for fuel when under load. I checked the fuel filter but there was very little trash there...changed it anyway. The problem hasn't changed after...

Hello, I have a 2009 MF 1533 with a DL120 loader. I have lost lifting on the loader for some unknown reason. The bucket tilts just find but the loader will not raise. I have checked the fluid...

I am going to try to explain the problem without having seen it. My brother was doing some work and after a couple hours noticed a leak. It is coming from the pump near the hydraulic hose...

Anybody know of a used/goood condition head for my MF1533? It's a 3cyl Iseki E3CD diesel. Any help would be greatly appreciated.

Good Morning all. Started it up this am to grade the road and it is making what sounds like a hollow popping noise from the air filter canister. It gets loud if I remove the filters. It's...

Does anyone have a schematic for the hydraulic circuits on a Massey Ferguson 1533 tractor?

Looks like there is a leak on the front axle on left wheel. As far as I can tell, It looks like it is leaking where the wheel turns (left or right). I'm not sure what you'd call that joint or...

I am not a mechanic, so I don't want to get in over my head, but my FEL does not pick up like it used to. It barely picks up a even full bucket of dry sand when I use the stock bucket. I think...

Hi, Just got a MF1533 (2007) with about 350 hours on it. Got a good deal for around 10,500. Tractor is in great shape. I was working hard with the tractor and think I overdid it working on a...

I changed the fluid in my tractor today but after putting fluid in I'm guessing I have air in the system because I have no power-steering and the bucket and rear won't lift up. Do these have a...

Hi all! I am new to the forum. Been farming since 1976, but now retired from active farm work. I bought this little 1533 to help with general chores and cleanup. I looked at new JD and Kubota...

I have a 2005 MF1533 that came with FEL and hydraulics for a grapple. Now I have bought a MF1575 backhoe. It did not have any installation instructions with it. On the side of the transmission...

Is it possible to add a set of remotes to this tractor without going the dealer route (nearly $2000)? Would like to add two remotes to the rear and (wishlist) one to the FEL for future use.

Hopefully someone can help? I have a Massey 1533 that has a fel and I also added a valve so I can use a small grappler. It all works great, but I sense it is not working as strong as it should...

Hi Everyone, I've been researching it seems like forever and now it's finally time to replace the old 8n. I'm trying to stay under $20,000.This is what I'm looking at- Kubota l3800 with FEL and QA...

350 hours 4x4 4 in 1 FEL bush hog 5'4" disc harrow Box blade Looks very clean $13k What do y'all think?

MF 1533 or MF1635 Hello new guy to the discussion forums and have been doing a lot of reading and appreciate the shared experience. I am looking at purchasing a compact for my property. I will...

Has anyone had problems with sticking hydrostatic pedals on their 1500 & 1600 series tractors. It happens when the tractor is under load, such as pushing into a dirt pile with the loader or...

Any thoughts on a fair price for this 2007 Massey Ferguson 1533 Tractor with loader and 5ft bush hog? Has around 275 hours, synchro-shuttle trans. Do the tires look about right for only 275...

Hello all i was wondering if someone has experienced a problem similiar to mine or knows whats wrong....i was mowing today and the tractor kept coming out of mid range so i kept putting it back in...

I called my local Massey dealer today to get some pricing on the rear remote kit for my 1533. Apparently, they only have a dual remote kit and it's $1887! Is that all? I replied to the salesmen...

i was wondering if any of you can help me before i take to dealer. My wife was mowing our field which was 10 acres and she called me well the PTO doesnt engage no more. she mowed for prob like 2...

Hi everyone, I have been reading the posts here to help me research what tractor to buy, I learned a lot by checking this site. I have ten acres in michigan, and my machine will be cleaning up the...

Hello all, long time reader - first time poster here. I've been looking for a good tractor in the 30 - 40 HP range for a while now and can't seem to find any good used ones for a less than new...

Looking at a MF 1533 w/loader. Does anyone have one and what are your pros and cons? Will the little tractor handle 1,000lbs rd bales with the FEL? The specs say it will but Im looking for real...

Hi everybody, This is my first post . I have a 2006 Massey Ferguson 1533 with 340hrs on it and I have developed a leak in the main loader valve body. The leak is coming from the small hole next...

Just baught my Massey yesterday and can't wait to climb aboard.

i am looking to buy a tractor with FEL and i think the mf 1533 is a good way to go, does anyone have any complaints about them? the other thing i wanted to ask was for that size tractor it seems...

I am trying to find out if the Massey 1533 loader controls have the "power beyond" feature, or do I need to change the control. I am looking to hookup a log splitter, I know how the "power...

I have a Massey 1533 - I have been browsing the threads looking to see if it has a "power beyond" port coming off the loader controls. I am looking to hook up a log splitter. I understand how...

I am getting ready to purchase by first tractor and have some pricing questions. I am looking at a 1533 4x4 Loader for 20,500 and 1540 4x4 Loader for 22,500 at a dealer in Mississippi. 0% for 72...

Surely there is a trick to reconnecting the hydraulic hoses for the FEL to our MF1533. Pushing as hard as we can on back of the connector and the hose hasn't been enough. A quick search here...

I've got a 1533 waiting for me to pick it up in a few weeks. Is there a manual available anywhere online? There's no better reading than a piece of equipment's service manual! :)

hi all, so my questions are these: is a PB and remote valve kit the same thing, dealer wants 1000.00 for a kit, im wondering if i can come off my existing joystick for loader... or maybe just go...

Anyone here happen to know the correct oil/fuel/transmission filter part numbers for a MF 1533? I got a Challenger MT265B with hydro transmission that suppose to be the same machine as the 1533...

Hello, Was on my 1533 yesterday when I heard a Pop and saw Smoke on right side of motor. After Investagation I determined it was the Solenoid on the back of the injector pump ( melted the rubber...

Hi all, I have a GC2300 w/ a FEL & 60mmm I believe it is a 2004 model. I use it primarly for mowing 4 acres, I also do some fel work where the problem is, I also use it to pull and run my 300 gal...

Well, I finally went and read so much I just had to join the tractor owners club. First a note on my user ID, Redeye_Rex. Most of my "net" time is after 11pm local time, usually on towards 1am. I...

If you happened to see my post in the safety section you'll know that I've been having absolutely terrible luck trying to rent a backhoe lately. I've been considering buying one for my 1533 but...

Last weekend while moving dirt for my new septic site hydraulic fluid began spraying out of the bottom of my MF 1533 loader joystick/control valve. While checking for loose fittings I realized it...

Thanks to Jackie at Millonzi, Clyde at Fasse and my Massy dealer Allen I was able to take advantage of the suggestions read on this site. The combination is better than expected. I was worried...

I would apprciate any thoughts on a new 1533. I am trading up from an Iseki TL2700F. I have heard that the hydraulics can be an issue with these tractors? Also, is it true that filters and glow...

First post. Does anybody have experience with hay bailing equipment that I can use with my MF1533 (33HP/26PTO). Round or square. Only have 8 acres in coastal and local bailers won't touch small...

Thanks to everyone in this forum for your insight. It helped me decide on MF1533 PowerShuttle with FEL and quick detach bucket.I've had the tractor for only a week and I am extremely pleased with...

I am considering the purchase of a MF 1533 for use on 15 acres of land I recently purchased. The land is ~11 acres of field (with 5 years growth) and 4 acres of woods. We plan to build a house...

I am planning on adding another tractor to the farm and am interested in something with a FEL to load horse manure and clean out some fence rows. I have looked at two Kubotas and read on this...

Hi everyone, Just thought I'd drop a line. I just bought a new 1533 w/ loader, woods PRD 84'' cut rear discharge finish mower and a BHX80 woods scooper (16 & 9" buckets)..... i'm looking forward...

A local dealer has offered me a 2006 brand new left over MF 1533, with 4wd, a factory cab (with A/C and heat) and factory loader for $23,750. I think I can get him down more, because he admits he...

Finally have some pictures for those who care. I will send pictures along of the other equipment as I get into more projects. Puck

I am preparing for my 50 hour service, and my MF dealer sold me MF hydraulic oil that is simply labled Permatron. My manual says to use Permatron III. When I questioned him, he said it was the...

After reading a lot on this forum and visiting several dealer, I finally ordered this morning a brand new MF 1533 with 1525 FEL and 1575 backhoe.:D Tractor will be delivered 1st week of August...

Hi, Im about to buy a MF 1533 with 1525 FEL and backhoe. I hesitate between the MF 1575 backhoe and the woods bh80-x. I havent seen the MF or the Woods other than in the brochures. Anybody...

Only 4 hrs on new tractor and already need more attachments. I purchased a 5' bushhog w/tractor, and was told it would handle a 6' FM. Is a 6' too big? And would it handle a 6' bushhog? I know...

I just signed a contract for a new MF 1533 8X8 Power Shuttle with FEL 1525 and a Howard R300B-150 tiller from an Oregon dealer. I paid $20600. Will the 8X8 allow the tractor to go slow enough for...

See my final post under heading L3130,Farmtrac360DTC,MF and others for rationale if interested. Thank you again for all the insights as I've been glued to this sight for about 3 weeks now...

Is the 2844 lbf weight spec for the 1533 in the Massey literature correct? I checked one out in person today and it doesn't look 630 lbf lighter than a Kioti DK35 or 400+ lbf less than a kubota...

Well, I've been look'n and look'n, and jut am having a hard time deciding on which machine to go with. today I drove the MF 1533, and loved it. Price: $17,700 with MF loader. Good or bad...

Today we took delivery of our MF1533 12x12 syncro shuttle, industrial tires equipped 1525 front loader with quick attach mounts. We also got a 6' box grading blade and a set of pallet forks...

We've got 20 acres, about 13 of which are wooded. Uses for the tractor will be bushhog work on about 5 cleared acres and 3 wooded, we'd like to till up a few acres for farming, maintain about...

Hello… This coming week is delivery time for my Massey 1533, BUT… My 1533 that I want to get (dealer has in stock) has the OPTIONEL JoyStick on the fender for the 1525 FEL w/60” bucket (also in...

I'm considering a new tractor with a cab to mow 9 acres with in a medium rough field. I currently use a 2610d Yanmar (30hp) with a 6ft finish mower and it gets the job done for now, but with my...

I've got the lugs off byt the tire won't come off. Why not?

New MF 1533 owner - should have delivery next week. Got a loader and 6' 3pt finishing mower with it. The MF is replacing a Kubota B7500HSD, which is a great little workhorse, but I've doubled my...