Hi everyone, hopefully someone can help me. My tractor shifted gears and drove good. I bought it used and had it for a year with no issues. Since I bought it used I thought it would be a good idea...

NH 1715 clutch stuck to flywheel. Is there anything I can do to free up the clutch, or will it require a trip to the shop.

Just got a Ford New Holland 1715 Hydraulics don't so squat! Moved a tad when the owner was showing me but very slow, now nothing. So I noticed the fluid was over filled and milky. So that's water...

Hi all, Anyone know what is involved in replacing the seal in this bugger. Does the shaft just slide out to get to the seal or is it more involved. The 1520 and 1320 should be the same if you own...

Any help in finding a one piece rear wheel NEW HOLLAND part number SBA336101020? 11.2 X 24 tire size, 6 hole.

Does anyone know where to find front wheels for a Ford/New Holland 1715 - 16X 4.00 with a 3.125 center and 4.750 center to center bolt Holes

\Hi all, I'm new here, asking questions. My husband of 44 years just died - taking all of his knowledge with him. I need to keep my tractor running so I'm hoping I can rely on ya'll and pick...

Hi all, Continuing the reassembly of my 1715 after a crazy few months with clutch replacement and came to the instrument panel wiring harness and noticed that a blue connector was just hanging...

To summarize.. I bought tractor from original owner, and the wiring is a mess. I suppose the previous owner lost the key, because he tucked the ignition switch behind the dash and just hooked...

Got my service manual today, I figured I would share with anyone else who needed - in case it had not been previously posted.

Hi all, I've just got back to working on my 1715 tractor after about 6 months of sitting. I had to replace the thrust bearing and since i was splitting the tractor I had the whole clutch sent out...

This may be a bit lengthy, so please bare with me. My 97 NH 1715 is having starting problems. About two years ago I went out to start it at an idle and it would not start. It seemed to be...

I have been researching tractors for almost a year now and the tbn forum has been a big contributor. I finally have the ability to make a purchase. :cool2: I have come across a '97 New Holland...

I have been researching tractors for almost a year now and the tbn forum has been a big contributor. I finally have the ability to make a purchase. :cool2: I have come across a '97 New Holland...

Hello to everyone, I have an issue with my compact tractor, when I am in gear and going the tractor is struggling to make it up an even small incline, I have to sometimes go backwards and get a...

I posted this about a week ago, so will try again. Last fall I went to start my old dependable 1715 and it would not start. Changed the fuel filter, checked all the bleed vlaves, and checked the...

:eek:Last fall I my always dependable tractor would not start. My neighbor and I finally got it started by pumping it manually and then keep the throttle high and back it down slowly over about...

I need to take apart my new holland 1715 does anyone have any instructions on how to take my tractor apart so it will be in two pieces

I have a new holland 1715 tractor and I can hook my spreaders up to my pto and it works for a couple of minutes but these it stops working but when I hook my bush hog to it it wont turn the blades...

I know the subject has been discussed before but I'm still not sure what parts need to be replaced. I have been removing the cover to get it unstuck but would like to go ahead and fix whatever is...

I know the subject has been discussed before but I'm still not sure what parts need to be replaced. I have been removing the cover to get it unstuck but would like to go ahead and fix whatever is...

I've got a model 1715. There's nothing that I can see to keep the lower lift arms fixed and straight behind the tractor when pulling my finishing mower. As a result the mower slides side to side...

Hey NH guys... I have been looking at a 1715 tractor at my JD dealer. I am looking for a secondary machine for finish mowing and tilling. I remember back in the late 90's when this machine was...

This is my first post, but I'm a long time lurker. I bought this tractor used in 2003 and it's run great until recently. I estimate the hours at around 1500, but who knows, the hour meter was...

My mechanic suggests I need to replace my hydraulic pump and my power steering cylinder. The total cost of those parts is over $1000 including sales tax. I cannot seem to find used parts, and...

Last year my dad died at 89 he had a New Holland 1715 with a mower, disc, rake and a few other attachments. It has 685 hours so needs the 600 hour maintance I changed oil and filter and fuel...

Hi guys. I was wondering what a New Holland 1715 with 740 hours and is four wheel drive with a front end loader may be worth. Thanks

have a new holland tractor and the starter dies. I cleaned it out now it works like a champ, and I see the bendix gear pops in and out as it should. When I install it, though, it sounds to me...

This is a repost from original placed on gen'l forum 1993 1715 bare bones. 600 hours maintained well. Very low torque when PTO is turning deck mower, for example. At normal power, RPM's remain...

1993 1715 bare bones. 600 hours maintained well. Very low torque when PTO is turning deck mower, for example. At normal power, RPM's remain normal, but PTO rotation and tractor speed slow...

My old Fordson tractor died, and I'm looking to replace it. I've got a JD 915 five foot rotary cutter as a legacy implement from the old tractor, and I would like to be able to rototill up to two...

I'm looking for the repair manual(s) for a Ford/NH 1715 and have read that there's not actually a manual specifically for the 1715. Does this sound right and if so which tractor will I need to...

The mechanical hour meter has stopped. Tach is in same unit and works great. It's mechanical. I pulled the unit out of the dash but cannot get it apart to check. Does anyone know how the bezel on...

I have a 1997 1715. We have a coil display on the dash for the glow plugs. If that coil breaks does that disable the glow plugs when turned on for cold start?? thanks

Hi all. Yesterday I purchased a 1715 with FEL, new woods scraper blade, and new woods landscape rake. At $8800, I couldn't pass it up. It is a '96 in excellent shape with 700 hours. My...