I’m curious of the comparison if anyone has experience with these. I only see videos on the older Fords pulling 2 bottom plows etc. What would be the similarities or differences to a mahindra...
I may be the only one that doesn't know this? My quest for info it appears to me that the Mahindra 2816 is Almost IF NOT Identical to the Cub Cadet 7305. I have compared parts lists and they are...
I could hear almost like gears just trying to mesh or what sounds like a marble bouncing around inside the rear of the tractor for lack of better description. I adjusted the clutch. All seems...
Hi All,
My Mahindra has developed a wobbly fan (cooling fan). Any ideas what the problem is?
I have about 450 hours on this tractor with very few problems.
Bob
Cleaned all cables, changed negative cable, changed terminals, battery post cleaned, no corrosion, battery good 18 months old. Tractor on family land used for bush hogging, no one uses otherwise...
New to tractors and I wanted to get some experienced folks opinions. I have the opportunity to purchase a 2008 model 2816 with loader for $11000 cash. The machine is one owner with 107 hours on...
How much longer will you be able to get a backhoe that will fit a mahindra 2816 ? I was told that the one on the 3016 is different and didn't fit the 2816 .
2008 mahindra 2816 gear tractor loader with 189 hrs . I think the 2816 isn't being built any more so would it be harder to get parts for them ? In the last year I have seen several for sale with...
Hello everyone! Just wanted to say hello and thank all of you guys for the knowledge on this site. I spent countless hours researching to figure out which one I should get and with all your help I...
I have a Mahindra 2816 that the pto won't lift. The bucket does, but the bush hog won't come up. I have checked to make sure the valve is opened all the way and top off the fluid. Any other ideas...
Greetings. A newbie from RI. Have a Mahindra 2816 with just 200 hours on it. A week ago began experiencing power loss when under load. It recovered fairly quickly and would stay at RPM's for a...
I searched and found references to a Wix air filter for the 2816 (Mine is Gear) and seems everything I found had the wrong cross reference part number for the wix. I can confirm that part # 46483...
I'm having issues with my ignition system and have pretty much narrowed it down to the solenoid / starter. I have starter unbolted but can't clear it. There is an approx. 1" tube that looks to...
Howdy all!
Bent my bucket a few months ago removing some stumps. Not bad but it tweaked out the top of the bucket enough I didn't want to weld hooks onto it.
40 bucks and 2 sticks of steel...
My Mahindra 2816 HST now has 130 hours on it. It has been a great tractor except for one small issue. Ever since the day I first used it I have noticed that at normal operating speeds (1500rpm+)...
Hi all! This is my first post to the forum. I have been reading the posts on this website for over a year now and have gained a wealth of knowledge. Thanks to all that has provided good insight...
I am new to this forum and looking at a couple of Mahindra tractors. The 2816 and 3316 tractors. The 2816 is in my price range but when comparing the two the 3316 has additional framework from the...
Hey just joined, want to buy a New tractor, been reading for a few months and It seems I find more complaints about Kioti than Mahindra. The only thing I notice is that the kioti is about 500 lbs...
Just a note of THANKS to all who have posted replies to my posts.
I expect to receive my new tractor on Nov. 6 if all goes well. I have already ordered " Pats quick hitch system ". I am also...
i JUST BOUGHT A NEW BACKHOE AND LOADER ON THE TRACTOR AS WELL. cAN ANYONE TELL ME ABOUT THIS PARTICULAR MODEL AND COMPARISON BEWEEN . OK, thanks kindly.
Anyone else notice the cowl vibrates (dashboard too) a lot at idle on their 2816 Gear 4wd? The PTO guard also seems to vibrate harmonically at idle, then resolves when the tractor warms up.
Brit
I recently purchased a 2009 Mahindra 2816 w/106 loader. I have been clearing brush and small trees with my cutter and loader in hopes of a future home site. Being a rather new tractor operator my...
Well, I decide that if I did not buy a tractor now I never would buy one. It was my 50th Birthday and I have been looing at a new tractor for our property for some time. We own 10 acres of hilly...