So I have a Question for the gods of TBN. I have recently acquired some preperty and Im looking for a good sized tractor for powering a 10' brushhog mower. I have ran MF, IH and Deere in the...

Good day all. After having several dealers quote me every tractor on their lots, and much help here, my search is narrowing. I am down to either a Deere 5083e or the new Kubota 8560. I was...

At the advice of another member, I'm transplanting this posting from another thread. I've read through another thread regarding the same tractors from a couple years back in 2009...

I have been eyeing the 5083E limited cab and 12x12 Power Reverser. Anybody have one or something in that series?? What do you think?? John

My new tractor is here! Ended up going with new cutter as well rather than used. I have to say I was sad seeing the kubota go. Gonna need a bigger shed... Too wet to use this weekend. Need to...

Well - I've been checking out the orange machines (Kubota) in the 70-80HP range but recently came across a JD 5083e w/ cab/MFWD and loader w/ only 25 hrs on it. Asking price is almost ($44,000)...

Gods of TBN, I have been wondering if it is even possible to put duals on my '11 5083E? I have the wheels set at the widest stance right now, but even with a 2400 lb counter weight, I have...

I'm looking for a trailer for my 5083E with 553 loader. I will occasionally haul with a mower attached so I'm looking at 24' gooseneck minimum. What are the pros/cons of lowboy vs deck-over? I...

Need some help from the diesel fuel gurus. I went out this am to drive my tractor to the dealer for the AC fix. While it was idling and warming up, I started the process if taking the loader off...

Well I've been looking around and researching for a while now and after comparing models and features I've come to the decision that I just can't buy a Japanese tractor (Kubota). I just can't do...

Hello all, I am looking to upgrade from my 4720 cab with FEL to a Larger machine. The reason is due to getting back into the hay business as well as snow removal. I am looking at the 5083e and...

Hi All, I have been lurking on here for some time. You guys are a great source of info. I have test driven many tractors through your words. I have a 300 acre tree farm, with about 30 acres of...

With only 350hrs on the clock the hydraulic system has become sluggish and developed a chatter when using the mid and rear svc, and three pt. No problems with the steering. It all started when I...

A few pictures of the new tractor. Going to take some getting use to. Never had a cab before, let alone a tractor over 45 HP. I love the lights, going to make late evening and early morning...

Got her home this weekend! I'm enjoying it so far, but I can't get my darling bride out of it! Traded my 5045D, got really good money for it. I got the 553 loader, the right door kit, stereo and...

When I bought this tractor I couldn't justify the price increase for the 93 and 101 to have identical tractors with the same engine. I had the idea that I could just turn up the pump and have the...

Hello All, I have a JD 5083e with 553 FEL on order. Now I have to figure out a way to get it home:laughing: From my research the tractor with cab weighs 7000lb, the loader maybe 1500lb? I am...

I had planned to use today to install a radio in my 5083e. Not only would it be nice to have music, but it would be very handy to have Bluetooth hands free calling to my phone. With my job I'm...

Got 40 acres mowed over the weekend! Had to do it in the early morning due to the AC not working. I first noticed this in June a couple months ago but regrettably didn't do anything about it...

Does anyone know a dealer in the raleigh nc area that is willing to put a buddy seat in a 5083e. I bought mine from quality equipment and they said they didn't want to do one because they had to...

Signed the papers yesterday, now just waiting on them to call and say they are on their way. It has a 553 loader, dual rear remotes, air ride seat, and bit the bullet and got the radio. I'm gunna...

Need help from everyone to keep an eye out for a John Deere 5083E VIN# LV5083E261755 with a 553 FEL, stolen in Morgan County Alabama. Has @40 hrs. on it. Reply to this thread or contact the...

Parents and I are seriously looking at a 5083e and had some questions on pricing. Dealor quoted me $40,500 (includes FEL). Seems like a decent price. Parents getting in their late 60's...

Does anyone know if the power reverser on a 2012 John Deere 5083e is activated using an electronic signal or is it a manual linkage? I am trying to figure out if my camera system will be able to...

Hi there, I was wondering if any of you know the thread size on QD couplings on JD 5083e. Is it 3/4" NPTF 3/4"-16 ORB 7/8-16 ORB Thanks, Peter

Narrowed down to the 5083e and 5085m. First the M -3 rear and mid svc's a, air ride seat, FEL w skid steer setup and bucket and deluxe open station. E series (cab of course), air ride seat, 3 rear...

Looking to upgrade tractors. Just wondering what everyone thought a good price on the trade should be. It has about 150 hours, with a cab, 553 loader and is like it rolled off the floor. Always...

Ok, so I found this 5083e a while back and have been pondering on it quite a bit lately. They say that the housing is broken as shown in the picture and the windshield is broken, other than that...

Bought this one off the lot. Still need to add the global carrier, rear wheel weights and hydraulic center link, but they said it will go out tomorrow. Add ons: 563 FEL Global quick attach...

Which one would you pick and why? (Same price, same warranty and same 0% financing). This is all around farm tractor for 80 ac. Some plowing, disc work, pull-type combines, baling etc.

Well, after much deliberation, they finally delivered the 5083E to the house and I said farewell to the 3520. Got the Michelin Radials and the Alpine stereo put in on Saturday, so I am ready to...

Just purchased a 2010 John Deere 5083E Limited and it didn't come with a radio. So I went to best buy and bought a JVC KD-R540 Radio and the Volkswagen Adapter harness. Wired it all together and...

Has anyone had this problem and if so is it something i can fix or is it a dealer thing? Only does this with an implement on the lift arms makes the whole tractor bounce when sitting still.

I am running a NH 499 center pivot haybine and I am looking for some ideas on how to reduce the slop in the factory drawbar. The center pivot machine doesn't stay in the same position behind the...

Hello all! I have a 2010 JD 5083E Limited cab tractor. I use it for making round bales here on our property. Last summer I put about 100 hours on it. The problem is, my back is TOAST from the...

This spring I would like to get the 5083e a little wider for added stability while mowing ditches. Im just not sure how to go about it. Can these rims be widened? Or do I need spacers? Also what...

Getting close to my tractor purchase and want to know if anyone is using the mx15 with the 5083e? My JD dealer states that the largest cutter recommended for the 5083e is the mx10 pull type...

Had posted earlier about decision between 5065m and 5083e. After looking at the build your own feature on JD website I started looking at the 5101e. It appears to be exact same tractor as 5083...

Hello all, I have a 2010 5083E Limited and was wondering how I would go about finding out if there is an easy way to get 101E performance out of it. I believe they use the same turbo and...

I inquired at a nearby dealer about the price for a new 5083e. The salesman advised me that the new models have increased by $4k :o He blamed the increase on the rising price of steel and...

Well after nearly 20 years and 1700 hours I want a new tractor with a cab and A/C. Let me clarify, I want one, I dont really need one! I have owned a 1988 Massey 240 with a 232 loader for almost...

I've been researching the 5083e and can't find any info on plowing with it. I have 60 acres and an 8' jd offset and want to get a 12-14' disc plow. My 1973 100 hp 4230 can pull them fine so I...

Hi all I am thinking of getting a 5083E with a loader and a backhoe. I would like to hear from those of you that have this machine. Thanks Dave

I have about 160 acres, need a tractor for shredding, discing, loader work to fill in washouts/bale moving etc, snow removal, pto work. Was looking at the 5065m and then realized for 3k less I...

I am looking at getting a no till drill to reseed our pastures with. I have a john deere 5083e with cab loader, and the tires are filled with ballast. The tractor weighs about 10k pounds or more...

How many sets of lights can I install on the front and back of the cab? Anyone have any pictures of what it would look like maxed out? I have the standard two on top(front&back). I really would...

every time I turn key fuse blows

Just got my new 5083e delivered and want to install a radio. My understanding is that these tractors come radio ready meaning speakers and harness are installed. My question is how to get the...

Has anyone had to replace the whole glass door? Take awhile for it to be installed and price reasonable? Used their insurance to help cover? I had a very dumb moment today. I normally place the...

I recently picked up a used anti sway kit for my 2011 5083e. On the John Deere configurator it is part number BLV10121. The problem is the brackets that the factory installed anti sway chains...

I have a 2010 5085M with 700 hours on it. It looks like I may have the opportunity to buy a 2012 5083E with about 100 hours on it. So, here's the real question: Will there be enough difference...

I have been on the fence for 4 months and winter is coming soon. I have a toolcat now (56 hp) 5500 lbs with ballast and blade) which I do allot of condo drives with. I have too much work for it...

recently worked on a jd 5083e tractor no start replaced the cold start sensor bam fired right up. then the tractor had no rpms no neutral light and no pto. traced it all down to the two center...

I just purchased a JD 5083E and there is nothing to stop the hitch lever from going all the way forward. There is plastic square but no "finger" that the lever can stop against. I spoke to the...

Just bought a new 5083e. Does anyone currently use this tractor (or similar powered) with a 15' shredder? If so, does is handle it ok? I bought an 8' shredder from my dad to use for now later I...

Looking at buying a used tractor. Can't decide which one. What's the difference between the 2. Similar size and power I know the 83e is a newer model. What's been your experience with both? Pro's...

I'm buying a new tractor, cab, and loader to use on a little place we have out in the country. A little mowing, brush clearing, moving hay bales around, and maybe even a little hay production in...

Can anyone tell me the overall hieght to the top of the Cab?? JD on line is showing a 30" diffrence in the 2 units wich does not make sense.

I was wondering if anyone has made or thought of making a cover for the hydraulic lines and other exposed items on the right hand side of the tractor. I am planning on maybe making one out of 1/8...

Before I buy something that won't do the job, will a John Deere 5083e and a 553 FEL lift a square ton bale? or will the back end be bouncing in the air? Does anybody have a 5083e and how do you...

Does anyone know how to activate the glow plugs on a 5083e for cold weather starting or does this model even come standard with glow plugs?

The instructions in the manual make this sound simple, which it probably is. Here's the link to what I'm trying to do: OMSJ290166 I can't get the retaining ring "A" to turn more than 1/4". Even...

I am needing to slow the flow for operating a baler hydraulic tie. I can't seem to find a flow adjustment on either of the SCV valves on my 5083e. Just wondering if I'm missing something or the...

I went to the dealer and ask and said they didnt no either but the book says to grease them but no pic of where the fittings are.

Time to change the oil. The drain plug takes a square male socket. 3/8 driver is to small. Does anyone know what size this is Thanks

Looking at new tractors and am wondering if a 5083E would handle a 5x5 round baler. *83 hp 65pto Tractor without loader 7000lb . Now the 5093E is 93 HP 75 PTO. I don't want more tractor than I...

I am looking for a utility tractor for my father in law. We have looked at the JD 5083E and CaseIH Farmall 90. Feel they are comparable but the Farmall is made in Turkey. Can anyone help on the...

Hello. Been awhile since I've posted. I traded my 4320 open station on a 5083 Limited cab tractor with alot of field installed (by me) options. I have the left and right side-view mirrors...

I am in the market for a rock grapple to help move irrigation pipe as well as move rocks, bricks, scrap, trash etc... What is the consensus with Wildkat attachments? In a 72in width with...

I am thinking about trading up to a cab tractor similar to the JD5520 open station that I already have. The equal to mine is the 5083 JD and I have been looking at lightly used models. The M seems...

Ordered my 5083e yesterday. Should have it next week... :) This tractor is physically taller than my 5045D by about 4 inches. I have a clearance issue on my sheds, and would like to lower the...

Hello all Looking at buying a 5083E with OOS and 12 x12 PowerReverser. A couple of questions to owners out there... a) Can you use the column mounted Power Reverser without using the clutch. i.e...

Picked up some front fenders at an auction (A whole $20) awhile ago and was wondering if anyone had an 5xxxE series Deere with front fenders and could maybe snap some pics of it for me so I know...

Well, after a few years of deliberation we finally bought a 5083E. the 2012 model is awesome and has huge improvements over previous model years. I am very happy with it. Picked it up last...

Trying to decide between these two. Having a hard time getting a handle on a good price. The consolidation of dealerships makes it almost impossible to negotiate any price. It seems to be a take...

CORRECTION it is a 553 loader... Gonna get me a new cab tractor!! Was offered good trade-in on my 5045D... I have a couple of questions though. Got pricing from 46k to 48.5k. No extras... What...

There is a hill on my farm and when driving up it in c 1 i notice the vibration it feels like it is in the rear end the whole cab vibrates. But it only does it occasionally and i havnt notice it...

Looking at new tractors and am wondering if a 5083E would handle a 5x5 round baler. *83 hp 65pto Tractor without loader 7000lb . Thanks

Hi ALL- Years ago I traded my 2006 4320 OOS tractor on a new 2010 5083E Limited Cab tractor. The 5083E has a 563 loader. I have enjoyed upgrading my tractor over the years; more specifically the...

Looking to upgrade the seat to air ride in our 5083E. After reading others posts I want the Seat with more adjustments? Can anyone link me to one of these seats? I've only found this one...

Ok i think I've narrowed it down between the two tractors listed in the title. I'm really leaning toward the 5425 due the the difference in price. The only thing holding me back is it doesn't have...

Guys I was just about purchase a kubota 5740 with 200 hrs on it and I just found a 2011 5083e with a little over 100 hrs-plastic still on seat- both with loader- the Kubota will run about $32 and...

The tractors: 2012 John Deere 5083E, Cab, 4wd super low hours (like new) - no warranty , no emissions 2019 Massey Ferguson 4710, Cab, 4wd new, 2 year bumper to bumper, 5 yr powertrain Having a...

I have a 2009 5083E Limited cab tractor with 390 hours. I mowed hay on 6/30/2015, tedded the next day, and raked and began baling yesterday 7/2/2015. Everything progressed smoothly until I...

Want to put turf tires on 5083e and found wheels and tires off a 6400 lug and center hole look same size...... Does anyone know?

Anyone know of a bolt-on kit for dual rear wheels?

I've been in the market for a 5083e for a while now. Today I came across a used 2010 with 100 hours with the 563 loader. Not many upgrades other than air ride seat. Price is 38,000. It is in...

Ok, so I finally made it to 100 hours on my 5083E, and now it is time to change the oil for the first time. I have had it since Feb 2013. I am going to stick with JD filters, but I am not sure...

The float on my 5083E John Deere pos out now won't stay pushed down.Is there an adjustment I can do.Please & Thank You.

The temperatures here in Western KY right now are frigid to say the least. I should've already done this, but I just bought a block heater, part no. RE227949. Now I can't figure where to put it...