I just drug home a new to me 1963 530 CK... Will have several questions... It is a dry clutch shuttle shift trans and I haven't had any luck looking up fluid capacities... Steering wheel SUX...

any way you can walk me through a diagram of the hydraulic hose routing for the loader from the pump to the they valve to the cylinders on a 530 ck? This is the model with the backhoe aswell Ive...

I am rebuilding a 1966 Case 530 CK backhoe with the base tractor being a 530. The engine turns over by hand just fine, but I want to rear it down to clean and inspect it to see what needs...

Hi everyone, I just purchased a 1966 Case 530CK backhoe. It has a model 32 loader and hoe with the hydra-lift system. It was in a junk yard and I paid the fellow $1000 for it. It came with 2 extra...

Hello everyone, I have a loader that is supposed to be a Case 530, the rims are shot, and I am trying to find another set to replace them with, but everything I have seen is 8 lug. The rims on it...

case 530 manual desperately needed, started a new project aand need info Curtmiller295@gmail.com

I gave it a quick look over and jumped in with both feet first. I really have to stop doing that. LOL. I really believe it has good bones and just needs some TLC. Hour meter shows 3131.2. By...

Greetings. My Case 530 rockshaft has lifting arms that I cannot identify anywhere. The arms are equipped with a grease fitting and the arms that attach to the lift links looks like they could...

hello all, newto this forum group. got a question. I recently got a 1963 case 530 loader backhoe,road hard and put away wet !! looking for info on finding a new or used spindle and steering arm...

Hi All, I have a case 530 with a 31 Backhoe and yesterday when I attempted to lift the boom none of the backhoe controls worked. It was like the machine wasn't running. I then tested the loader...

I am looking for qty of 4 fuel injector sleeves part number G11724 anyone know where I may find some. thanks in advance.

My son is the new owner of a Case 430 or 530 loader/backhoe with missing identification plate. So far we are pretty sure it is a 530. Now trying to figure out year and if AG or CK. Many of the...

Hi Everyone, I recently bought a small piece of land to build a house upon for my family of four. Two weeks later, I was asked to help to move some equipment from a property when I saw an old...

Hey all, Looking at a well used Case 530 backhoe (around 1960)... it's seen better days but I think the owner would let it go pretty cheap. it does run and shift well... everything is functional...

OK..its a 1966 188 DIESEL CASE 530CK ...I believe it sucked in alot of water through a auxilary tank that previous owner put on...I was trying to get some wood moved before i replaced the fuel...

So..I've searched all over the web and can't seem to find info on this.. Does anyone know if the fuel tank can be pulled with the loader on? How do you take the model 32 loader off? (my spacer...

Recently picked up a 64 CASE 530 Farm Tractor. I live in the foothills on uneven terrain. Any chances of me finding a new or used ROPS for it? Would I be better off having one made? Thank You

I was recently given (yes given) a 64 CASE 530, diesel with a FEL and Box Scraper. I have a small property and I plan to use it to maintain the gravel driveway and some small tasks with the FEL...

Case 530 pto clutch needs adjusted my parts books shows how to adjust the kind that has a pto clutch in the rear of the tractor, Mine has the hand clutch about mid body on the tractor in front of...

I have a Case 530 model 541 the pto hand clutch lever is middle ways in the tractor body in front of your left knee if you was setting on the tractor. The clutch itself is inside the main body...

Hi folks- My issue is I've drained all fluids and replaced with high dollar case fluids..My question is I've refilled the torque tube and hydraulic reservoir through the breather next to the...

Working on a Neighbors old 1960's CASE 530 CK with Backhoe, No Fuel Getting to the Plugs. Can someone give me some tips about troubleshooting and adjustment on these Carbs, I'm not sure what's...

Hi- does anyone know where to find this. I'm having no luck on ebay. The cap has G1353 stamped on it. I need the retainer for the filter as well. When I pulled this cover off to replace the filter...

I am trying to find some lift link and leveling box for my case 530, or if anyone know of a different brand that fits. Thanks,

Some years ago I sold the '48 Ford 8N that I used around my house. I had it up at my place in the mountains, but it was not heavy enough to do work up there. Also with the well worn motor, it...

After years of wanting/needing a rough terrain forklift, but not really having the budget to justify one, I found this Case 530 on Craigslist - and only 15 minutes from my work! It was a lucky...

Hi All, I was wondering if I'm missing something or not... where my top link should mount I have (2) 4-bolt cast brackets about 10" apart w/ 1" hole in them. Am I missing a bracket or does the top...

Hi , looking for help with a Case 530 utility with a HD front axle. Right spindle is loose and in need of repair. Need to know how to disassemble and remove pin and bushing. Pin moves approx 1/2"...

Hello I have a question in regards to the tractor i have just inherited a 60s case omatic 530. It has no 3pt on it but does have a pto I am wanting to find a tiller that i can attach to this...

I made a poor decision and bought a 1966 Case 530 CK with loader and category one three point. I like the Case load leveling loader, you never get material dumped back on the hood and your self...

I'm still trying to get this backhoe attachment to work good, and wanted to know if there was a separate pump for the 3 point and remote hydraulics. The reservoir is in the torque tube from what I...

Hi, If anyone has a tractor like mine I could use some help. after having a cylinder rebuilt on my 3 point hoe I now have no hydraulics at all at the rear hitch. I don't know if the rear is...

Done a lot to this beast and now it is time for the electrical. It currently only has an alternator with no wires. I would like to have the alernator charge the battery and run some lights. Do I...

Hi, I'm a new member and I had a question, I'm trying to hook up a woods backhoe to a Case 530 Loader only and I'm not sure where to hook the hydralic lines to. It had two remote fittings at the...

Anyone know the procedure to remove/install the swing cyl's on a 530? When the cyl's are disconnected, can other cyl's be operated w/o loosing oil, or do the hoses have to be plugged...

Dear Friends, I have a front-end loader on my 1962 Case 530....Armstrong powersteering leaves something to be desired. Looking for suggestions/leads as well as an estimate of costs involved in...

I have no power in my power steering. I can barely get the wheels to move when its not moving. It has been sitting for a while, and I'm not sure it ever worked when I moved it last time. The...

The gauges on my Case 530 are not only not working, but they look so sad. What should I do to make it look good? I don't want to go overboard on this little sub-project, but something needs to be...

Hello, I am the proud new owner of what I believe is a Case 530 CK. However, the seller thought it was a 1953, and the 530 CK was '60-67. Looking at tractordata serial numbers, the one on my...

What is (or where can I find) the proper tire pressures for my '64 Case 530 loader backhoe? Also, what is the shift-lever on the right hand side between the brake pedals & the steering wheel...

New to tractors in general and the Case 530 in particular. I am planning on fixing up the brakes first. There seems to be alot of brake shoes for the 530 on ebay. Anything in particular I...

i have a case 530 that i need to adjust the pto clutch. it has a live pto and when it get a load on it the clutch will slip.

My parents picked up a Case 530 tractor, data plate says model 31. The frame is red, the tin and implements are yellow. I'm unsure if that means anything about its build. I've never worked on any...

We have a little of the newer (NH TC33D) and a little of the older (Case 530). Recently we acquired a Jacobsen T422D, primarily to mow lawn but have seen a need to outfit it with a snow blower...

Hi, I recently purchased a 530 w/model 31 hoe and loader. It is not a CK as far as I can tell. It has the COM transmission and is missing the ID plate (of course!). The fellow I bought it from was...

I'm in the market for a new tractor and have pretty much decided on a Mahindra 00 series and with the incentives, I'll probably go for the 6500 since it can do all the work of the old Case 530...

construction-ML-903037-ML- Construction equip, not tractor related.

I've been looking for a project here lately and really love the 60's model Case tractors. I've decided to restore/refurbish a 430, 530, 630, or 730; or maybe even one of the earlier 100 series or...

I'm a first time buyer on a small budget. Reasonable mechanic, grew up on a farm. My budget is small and need a capable machine for excavating, building some terraced rock walls and major...

Hi I pulled the carb off, it was leaking gas so I figure its a good time to clean it up and check the N&S and see if the float has any rot holes. In any event its a 13106 Zenith, now all apps...

I recently aquired a Case 530 with loader and backhoe. The unit is in fair condition with some repairs/maintainance needed, but it runs well and works well. It is a diesel. Are there any problem...

I'm borrowing a friends Case 530 Construction King TLB, and need to replace the points. Can anyone tell me what the proper setting for point gap is? Thanks. Brian