Hey all, Longtime lurker/new poster here. I have a new-to-me Ford 6610 Series 2 with a Great Bend 570 loader. It has, what I believe to be a Gresen 2702 hydraulic valve controlled remotely by...

I looked up the trouble shooting in the PDF service manual. It seems it is more complex than I would have thought it was. The tractor had been sitting for sometime before I brought it back to...

A friend of mine had his tractor and baler burn do to a bad bearing. He bought a ford 6610 4wd from a neighbor at the suggestion of the tractor repair shop. The repair man needs to retire IT WILL...

I've got what I believe is a 1978 model, I'm attaching photos in hopes someone can clarify for me. We've had the injection pump rebuilt at a reputable shop. The young man who is doing the work may...

Good Morning! I'm new to this forum and new to this tractor. I'm working on wha I believe is a 1978 model Ford 6610 diesel. It has fuel overfilling the crankcase and raw out the exhaust. Where is...

Good Morning! I'm new to this forum and new to this tractor. I'm working on wha I believe is a 1978 model Ford 6610 diesel. It has fuel overfilling the crankcase and raw out the exhaust. Where...

Just bought this several weeks ago. Brush hogging time cut down 2 hours. Spins my 10 foot Titan great.

I am owning a ford 6610 and I have been battling with pto for a while. hydraulic pump does not give enough pressure to engage the PTO, when supplying the valve with pneumatic I am getting joy...

Looking at purchasing a 6610 that needs #4 re-sleeved due to hole. Trying to get a quote from my buddy now who owns a machine shop. Owner says it has dual power, but not sure what else. Was...

HI, I have a Ford 6610 with a cab, there is no loader on tractor, when I purchased it did not have the remote outlets hooked up, I added them, to use I have to pull out a knob on RH side under...

Need new gearbox! URGENT! Anyone know where I can find one?

Quick question, I'm looking at purchasing a 1990 Ford 6610 2wd, 2000 hrs, brand new 18.4-34 rears, barn kept straight machine. I can purchase for $7000. A great price. My only concern is I know...

Can someone please help me on how to set timing marks for Ford 6610 Ferguson Engine ADE

Hie can I replace the inline type injection pump with the ford cav3249f951 on the ford 6610 model.

I have a 1984 6610 with a bubble cab. I would like to fit a new radio but I am having difficulties in removing the cover which incorperates the windscreen wiper, fan and temperature...

I have recently purchased a 1984 6610. I used it yesterday to do some grassing cutting with a 8 foot topper did the job well, but when I finished I noticed that the rear axle was really hot, is...

Anyone know what purge means on the fan mode? There is low, medium and purge?

Recently purchased a 1988 Ford 6610 and looking for manual for it. Im needing to recharge the A/C system. Anyone know where to find a manual? Thanks in advance.

Recently purchased a 1988 Ford 6610 and looking for manual for it. Im needing to recharge the A/C system. Anyone know where to find a manual? Thanks in advance.

I have a problem. It is dirt in the tank and I dont know how to clean it. I dont see any drainage hole and think the tractor is rebuilt for sweden with a cabin. Can any one help me. I have tried...

Well im back again to the most helpful site I have ever visited and many thanks to you all for your help both now and in the past. I am planning on changing the hydraulic fluid and filter on our...

Can anyone help with where to check hyd level? Also does the trans and rear end share fluids or separate levels for each? My brother in law is using a 6610 that belongs to his friend and he just...

Hello, Can anyone help with fuel infection pump removal? Specifically, how to time engine before pump removal. Thanks.

Does anyone know what the pop off pressure should be for a ford 6610 4 cyl diesel?

I need a timing diagram for this engine. I have completly rebuilt engine and not sure about pump timing.

I have a Ford 6610 with the factory wiring harness. I have just completed the over haul (2years), Any help would be appreciated. I have attached the pictures of the wires along with the alternator

My 6610 keeps blowing the seal on the side of the steering box, not sure why. Any clues?

I need to find name plate data on the ford front end loader to replace a hydraulic seal that just blew out, but can't find any info on the loader. Any help would be appreciated. Thanks, Don

Guy's i need help!! I have a ford 6610 just had the injection pump rebuilt,timing setting shows to be 27 deg before TDC,the pump rebuilder assured me the pump has been timed correct,after...

I was using my Ford 6610 for about 15 mins when I notice it was getting warmer then usual so I parked it back into the building and checked the radiator cap and water level witch was low and then...

I posted this in another forum but due to the time constraints I wanted to see if anyone may have some input on my issue: I recently just has the injection pump (inline simms) and injectors...

I have a bit of a situation. I pulled the injectors and pump in a hurry the other night to get them to the rebuild shop and didnt bring the tractor up to BTDC on the compression stroke before...

We currently have a MF 40 industrial with instant reverse transmission and FEL,it is a well worn example of this model and has a few issues.It also has shown itself to not be well suited to...

is any one out there willing and able to get me or connect me to a PDF of the owners operator or service manuals for this model 6610 ford 70's or 80's something I havent figured that out yet...

Hello, I am new to Tractor by Net, but have viewed the forum's for sometime. I have a 1990 Ford 6610, Series 2, 2 wd, with Q cab. The tractor has 1678 hours on it. It has a weterndorf TA26/27...

First of all many thanks to all of you who share info to keep our tractors moving when we need them. I am currently having an interesting issue. I have a 1985 Ford 6610 that has been in the...

Hey there, I've been looking at boom mower tractors the last few days as an option for a project I'm bidding on. One I've located is a '93 ford 6610 with a 20' Alamo boom mower and 60" rotary...

I have an early 80's model 6610 that over the past few weeks has had a steering problem. After a short time of mowing i noticed the steering gets more difficult to turn. The reservoir also becomes...

I just bought a Ford 6610, and I want to put a Woods 6-foot rotary mower (generic bush hog) on the 3-point hitch. To keep it from swaying back and forth, I thought I would need stabilizer bars...