Leaking hydraulic pressure sensor. Replaced x2 Now leaking again after only short usage.

My 763 has a door on the front of the cab and the loader arm is up just enough to prevent opening of the door (long story how it got this way). I tried disconnecting the hydraulic lines to the...

I've been in the process of converting my 3pth snow blower to hydraulic so I can run it on the Bobcat. I got the pump mounted on the blower with direct drive and put the blower in the SS snow...

I posted this in the Bobcat forum as well but thought I would try here as well since this is Hydraulic specific. A month ago I purchased a "new to me" bobcat 763F. It has 2500 hours on it. About a...

I have a slow drift down of my lift arms, not a serious leak yet. But, I noticed when i leave my sand bucket on it's "cutting" edge over night the front tires will have lifted off the ground. I...

Got a small hairline fracture in the housing on the radiator on my 763. Its small enough all it does is fizzle when it gets hot. Is JB Weld something good for this or would you guys just take it...

Hi guys, I have an Bobcat 763 with a a weird problem. I'd appreciate any help. Last winter, after the weather got down to 8 F here, I came into the shelter to find my B/C 763 had dumpled...

I'm looking for a free copy of the bobcat 763 high flow rapair manual, in a digital version. I just need to check an electric system recently repair i made. Thanks a lot g

Iｴve recently bought an Used bobcat 763 high flow (turbo), and iｴm working on for rebuild its electric system, that looks not so bad, but needs reconnect some cut wires somebody did cut. To do...

Recently started working on a 763C with the Kubota engine. The unit has been sitting for several years, but initially cranked as it always had. After adding fuel, we can not get any fuel to the...

I,m looking at buying a 1999 Bobcat 763. I've checked it out and all seems great except that it has some blowby. The down pipe from the valve cover breather is not connected to the breather and I...

I've been looking at used skid steers for a few weeks and a couple have found a couple in the right price range. Since I know nothing about SS's I thought I would ask for advice here. The 2 in...

Noticed that the tensioner spring was no longer keeping tension on my cooling fan belt. The spring and arm will only move when i physically pull on the idler pulley to increase tension on the...

Our bobcat worked fine and we rented a bobcat auger attachment. We connected it and drove it to where we were going to work and then went in for dinner. We came out and it wouldn't start. The...

This has happened twice now I was using my machine in the dirt fixing a culvert working all day fine towards the end of the day it pull's a code ACH 31-32 it will let you raise the arm, but when...

This has happened twice now I was using my machine in the dirt fixing a culvert working all day fine towards the end of the day it pull's a code ACH 31-32 it will let you raise the arm, but when...

HOPEFULLYAD SOMEONE OUT THERE CAN HELP. I WAS DOING SOME DIGGING TONIGHT AND AFTER 15 MIINS I HAD A LOT OF STEAM COMING OUT OF RAD CAP IT LOOKED LIKE. I SHUT IT DOWN AFTER SEVERAL MINUTES. IT...

I have got a, new to me, bobcat 763. I just got it running and noticed that the air cleaner 'can' is pressurized. That is, since the cover has been dented, I can feel a little air blow out of it...

Hi, this could be a reoccurring problem even though I do not find remedy in the repair manual. I have an old 763 hi flow with 6000 hours. After starting all works for a while then the hydraulic...

I have a 98 763 that I've been ignoring a leak and I'm tired of spreadng kitty litter. The machine has 3400 hours, mechanically runs strong and asthetically looks real good. What are common...

lately the unit starting to move by itself - levers are in center postions - cannot stop unit- have to keep moving levers back and forth to stay in position !!

I bought a 1999 Bobcat 763 skid steer. It didn't have any manuals with it. Would any one care to "share" their service manual with me? Thanks, Harry

Hi, This is my first question. I just bought a used Bobcat 763. The instrument/gauge panel in the upper right corner is very dim. Can barely see it. I believe it is lit up in an orange color...

My bobcat will not turn on, had three codes 21-02, 02-16 and 08-21 change my ignition switch. Now only two codes appear 02-16 and 08-21 but bobcat still wont start

i have bobcat error codes 21-02, 02-16 and 08-21 can someone help