I have a Woods BH80X backhoe mounted (with subframe) on an L3400 Kubota. It has a pto pump and tank. I want to replace the filter on the pto system but can’t find any identifying numbers. Anyone...

After about two years of on and off looking and comparing the pros and cons of both new and used, I bought a tractor to replace / upgrade my old JD 770 with model 70 loader and Woods BH7500...

Hello I posted a similar post on the Kubota owning and operating site didn't get much respons? So I'm reaching out to everyone. I bought a used woods Bh80X backhoe with pto pump and 3pt hitch. I...

Well finally bought a used woods BH80X backhoe actually have had it for about 3wks. it came with a 3pt hitch hook up and a Pto pump which I did want the pto pump my tractor is HST and I wish not...

Hi All. I have a BH80X on a Bobcat CT230, today while digging up a stump, I noticed that when I let go of the stick, the boom would keep drifting slowly to the right. It would do this whether I...

My father recently purchased a DK40SE with a woods backhoe and I noticed a few things that I haven't noticed with other units 1. The main boom function seems very jerky even with the tractor...

I am looking at buying a backhoe for my L3901. Does anybody have experience with a woods BH80x on a similar sized tractor? I know the BH77 is a good backhoe but I think a hydraulic thumb would be...

Been a long time coming but I finally got a backhoe for our L3540. I chose the Woods BH80x for a few reasons; I wanted a hydraulic thumb, the price and USA made. While I am sure the Kubota BH92...

I've got a new (under a year) Woods BH80x with subframe mount on my NH TC33D. I had it off the tractor for a few months and when I went to hook it up I find that I have almost no hydraulics power...

anyone know if the woods bh80x hoe will fit on the back of 2014 Mahindra 3016

Hello all! New to the forum, I am seeking a way to get more digging power out of my woods backhoe? I have a L3400hst. I have already up the presure of my tractor to 2700psi but haven't received...

I was using the backhoe to dig out some stumps today. I pushed on a stump with the back of the bucket and the dipper cylinder broke at the cylinder rod end. I have over 400 hours on the backhoe...

I have an opportunity to "upgrade" to 80X on my CK27... the question is: is this backhoe a good match for the tractor? I have seen sluggish performace in hoes not sized properly for the...

Looking into this BH for my '09 Kubota. My dealer just told me that Woods is no longer offering the sub-frame for the L3400 and is steering me towards the 3-pt, which I don't want. Can anybody...

The larger size R4's. I want them. Tell me that I can use a 3ph finish mower and not rut and muddy the one acre of old farm land that passes for our front lawn. Woods BH80x backhoe. "Looks"...

I was digging out a 10" stump with my Woods BH80X (done it a hundred times before), when suddenly BANG!... the cross tube on the cylinder end of the dip stick cylinder had broken off. The weld...

A local Kioti dealer went under and they are selling off the leavings,,,,,,,there's a Kioti BH 80X ,,,which is a WOODS, , now I got a hold of a 2006 spec sheet and on that it says I can get a...

At an Idle, I can do a lot. At 1500RPM's this thing has more power than I expected. I was worried that I didn't have the GPM's to run it to it's full potential, but I was wrong. I spent 2 hours...

Hello, I am in the market for a backhoe for my Kubota L3400DT. I have been looking at the BH80X and the Tomcat 76. Are the any opinions on either for my 3400. Any help would be appreciated...

Has anyone installed a Woods BH80X or BH70X on a CT235?

Dealer is offering above for $6600. First backhoe, is this a fair price. Thanks. Scott

I have a woods bh 80x backhoe on my kubota b3030, around a year old. It's got the optional manual thumb. I'm thinking about buying a TLB,at which point it doesn't seem like I'd need 2 backhoes...

I've got a Brand new Woods BH80x subframe mounted on a Kioti CK30. As I crowd the boom under load there is some very unnerving creaking (almost a metal popping). This starts happening when the...

Is there both a mechanical and a hydraulic thumb available for the Woods BH80X backhow, or just one type? Thanks, Mike

i have a woods bh80x backhoe on the way. the dealer tells me that there is no hydraulic hose kit for my 3710. how do i go about hooking up the hydraulics? also i am going to mount the subframe and...

hello tbn! after gathering info. from this site and doing a bit of research i have a bh80x on the way. the dealer tells me that their is no hose kit for the 3710. so i am looking for info. on how...

Went to a dealer today that told me he sells the Woods BH80X and puts them on the L3400 all the time. Other dealers tell me the Woods is big for the L3400 and I would have to go with the Kubota...