I cannot lift the bucket or three point and the power steering is no longer working. The fluid levels are OK and the hydraulic/transmission filter is clean. Is this an issue with the pump at the...
hello
I have a JD 2640 (1979) with what appears to be a 1,000 rpm 21 spline pto spindle. I recently purchased a King Kutter rotary mower with a six spline 540 rpm shaft. I have been told that...
Anyone else have a JD 2640 and know where the starter relay is actually located? I have the tech manual, but the one pic it has for this is grainy and has an arrow pointing to (upper corner under...
My Tractor A John Deere 2640 was left to sit for several months. When I tried to start it, it would crank but did not Fire at all. Wondering what the issue may be and wonder if it has a fuel...
I recently purchased a JD 2640 with 5,400 hours. I've never owned this tractor before and have afew questiosn if anyone can help:
1. The front end loader bucket is always slowly dropping and...
Been lookin at a pretty straight JD 2640 with about 4,000 hrs. I would like to use the tractor as a baler machine and pull a MoCo. A small square baler and maybe at some time down the road a...
Hi Guys,
recently inherited my Dad's JD 2640. Have been having to jump start it; suspected very poor batteries (has 2), but now am not so sure. Topped off water in each cell of both batteries...
Hi,
I've never owned a flail mower before, and I want one to keep my CRP grass in check. My JD 2640 has about 70hp at the PTO, and I'd like to go as wide as possible, within reason. I'm...
I am looking at an 2640 with loader. Can anyone tell me what trans comes in the 2640. It has a loader and was wondering if it cam with a reverser for loader work. I have looked on tractor data...
My block heater does not appear to be working. Had it plugged in for two hours and could not feel any heat when touched the engine block. I checked the resistance with multimeter and was close to...
I was snowblowing the driveway when all the lights on the tractor got real dim and the alternator light came on. After I shut off the tractor it wouldn't restart. I brought the batteries in and...
Hi to all, I am a newbie here, but use other types of forums...I help my dad on his farm, I live 25 miles away. He has a JD 2640 that is driving us nuts on the starting--hard to start, barely...
It looks like in order to change the fan belt the manual says that you need to remove the main hydraulic pump drive? Is this the coupling located at the bottom just below the radiator fan? Looks...
Hey all,
I have a John Deere 2640 with leaks from the hydraulic lines. I'd like to get part numbers and schematics for the hydraulics. Any idea where to find them for download online?
Thanks
Jeff
Brake Appear To Be On or Engaged on 1980 JD 2640 stick shift. I checked hydra fluid ok. Front wheels are free when I roll up the front end/fork.
Occurs forward and backwards but not all the time...
Have 18.4 x 30's on Dad's 2640 right now, but tires are showing small cracks on sidewalls, and are likely from 1980's era, so would like to replace, with decent used, if I can find some.
Inner...
I found a nice looking JD 2640 on Craigslist with the following description:
I have not seen the tractor in person, but talked with the seller today. He explained that the engine is not new...
I need to replace all 4 ends and JD parts are $100 apiece
Can I get generic ones? Where would I find them?
I'm in northern Illinois
Thanks,
Barry
__________________
What would be a fair price for a John Deere 2640 with a 146 front loader 1978 new paint job? Everything seems to work except the left brake and the key does not activate the starter every time...
I have a couple hydraulic leaks on my JD 2640 that I am trying to diagnose. The first one leaks near the steering column and down onto the brake pedals. The second leak comes down between two...
I was disking our arena with our 1980 JD 2640A when I noticed it was loosing power. I barely made it out of the arena when it died on me. It will start up fine and run for about 20 seconds and...
Hi Everyone,
I am a new member & first time post.
Today I was trying to shift from low to park
to unhook my bush hog when my shift stick
pulled completely out of the socket. The tractor
is now...
Dad gave me our 2640 that I used to work on as a kid. He mentioned it needed a valve replaced in the injector pump. He's most likely going off of what one of their mechanics told him. Said it...
I was looking at a John Deere 2640 tractor which has had some extensive work done on it. I had agreed to a price and the dealer delivered the tractor. No money has changed hands. I was looking...
My father in law is thinking about buying a JD 2640. He found it on Craigslist, so he isnt sure on the hours right now, but the photos seem good. It has new tires and battery. Does anyone know of...
For the 3rd time in less than 2 months, one of the two O rings (actually flat rubber washers) that seals the fluid in between the Housing and the valve cover is shredded.
After the second event I...