My granfathers old farmall C got dumped off on me in pieces. Engine torn down, blocks been open to the elements for years. I don't have the back, neck, or time to mess with it. Some mechanic from...

The Farmall Super C Brochure

I think I need to change the ring gear on the flywheel that the starter engages on my Super C with wide front end. If so, the tractor will need to be split. Has anyone split an old Farmall like...

A Harrowing Experience-1953 IH Farmall Super C & C-36 Disc

#Farmall Tractor Week, Day Two-1953 #Farmall_Super_C

#Farmall Super C The Positive And Negative Battery Change IH

To piggyback off another thread here, I'm looking for a strictly "fun" vintage tractor. Needs to be something small, but bigger than say a Farmall Cub. I'm a big guy and don't want to look like...

I have a 1951 Farmall super C someone removed the distributor without marking. How can I set the timing. I also replaced all of the ignition parts but the wiring seems off. The tractor turns...

I have a 12v 1953 SC that I'm installing a Precision Electronics ignition in but can't get spark. The instructions are a little sketchy and I've wired it accordingly. I found YouTube videos for a...

I just bought a Super C Farmall. The manual says, "Refill the reservoir with the IH "Touch Control" fluid." Since I don't have an IH dealer close by, is there an equivalent hydraulic fluid that...

One is a Super A, the other is a Super C

I Just added a Farmall Super "C" (narrow front) to my farms equipment and it came with a front loader with the old style trip bucket loader with Hydraulic rams etc. What i'm trying to figure out...

Can anyone tell me where I could download the manuals preferrably free. But I do need them So I would invest. I need an operators manual parts and impliments manual. Also what are the...

help with removing bolster top wheel worm steering gear 38 teeth &worm steering gear.

Hey people! I am hoping to rebuild my grandfather's Super C. She has been sitting in the barn for 20 ish years. I decided on Memorial Weekend to get her in the shop and start working. I put air...

Has anyone made a rollbar for Super C? If so what size pipe did you use?

I got a farmall super c that's been sitting in my mothers barn for over 15 years. I've been taking my time on it. I'm going to restore it eventually, but it occurred to me that it may require...

My Super C has a 3 point hitch, so there aren't any hydraulics running to the back of the tractor. How do I tap into the tractor hydraulics and run lines to the back. Tommy-

just trying to fiure out how much i should sell my wide front end farmall super c with front snow plow.

I farm some 2 acres of organic produce and some of the beds are on 10 to15% slopes. I like the high ground clearance but am concerned about being to safely work the beds on the slopes. Does...

Hello all, I have a farmall super C that has been in the family and on the farm since it was bought new all those years ago, theres many family members and neighbors that claim they drove it...

I can't seem to find the oil dipstick. Also not sure where one can add the oil to the crankcase. Stupid of what???? I have only one view of the tactor for viewing.

how to adjust front wheel bearings

I have a restored Super C that is in need of the 2 row cultivators that work by the hydraulic lifters that are present at the side and middle of the engine. I recently ran across a fellow who has...

Does anyone have any info on the fast hitch hydraulic check valve that is just in front of the seat? The problem i have is the check valve will allow me to raise the draw bar but it will not allow...

Well it's been just over a month since I pulled the Super C out of the overgrown field, and found a completely seized engine. Today the starter was delivered, so I gave it a whirl. After a few...

If you've been following along, I am in the middle of rebuilding my Farmall Super C engine. I'm looking ahead a little bit, but I have a feeling that the Hydraulics in the tractor is seized up...

I got my Super C home the other night after a few hours of wrestling it out of an overgrown field. Today, I started the process of getting the engine runnning and ran into a number of things I...

I have a 1951 farmall super c with a fast-hitch. I can raise the fast-hitch with no problem, but when I lower the fast-hitch it barley moves in the downward direction. I can hear the hydraulic...

Hi all I'm new to the site and have already found there is a lot of information on here. I am having trouble with a farmall I picked up a few months ago. I bought it from a friend and he seemed to...

Hello, I am new to this site and introducing my self as johnouthouse.net thanks. I have a farmall super c that I am working on it belonged to my grandfather and is not currently running!

I have a Swisher XTZ-60, a Hinomoto E-2304 with FEL (no front wheel drive)and 3 Farmalls (1 200, and 2 Super-Cs) the 200 I use has a problem lifting a bush hog. It used to lift it enough to cross...

im looking for a engine breakdown pic any help would be great

I realize that there are a lot of different plugs that will fit the Super C 123 engine, but if you really want the correct plugs, what are they? I have an Owners Manual as well as a Parts Manual...

I spent my childhood on a Super C Farmall. The only equipment we had with the tractor was a 2-row cultivator which were operated by the hydraulics, front and rear. It did not have a Fast-Hitch...

I have a farmall super c that I have just purchased and it needs the carb overhauled. I went to our local dealer and he wasnt very helpful on a kit for it. Guess it wasn't new enough to be on his...

Can someone tell me/show me in a picture, where the differential filler hole is on a Super C? How much and what weight/brand should I use? Also, how much fluid should the transmission hold and...

Hey all- I've "inherited" a 51 Super C, it's my first tractor. It was driven to the spot it's parked at 5 years ago, and to little surprised the engine's now seized/rusted. I'm currently soaking...

Need to know the weight of my 1952 Super C tractor ,without attachments.

A friend of mine owns a 1953 Super C, and wants to put a 3 point hitch on it. Has anyone out there put a 3 point on one of these? Got any pictures? Any words of wisdom you care to share? We plan...