Skidmark25
Silver Member
New fuel containers really stink. Actually it is the nozzle. Any place I can get the old style nozzle???
Fuel containers
- Thread starter Skidmark25
- Start date
- Views: 1330
SnowRidge
Elite Member
ultrarunner
Epic Contributor
- Joined
- Apr 6, 2004
- Messages
- 24,635
- Tractor
- Cat D3, Deere 110 TLB, Kubota BX23 and L3800 and RTV900 with restored 1948 Deere M, 1949 Farmall Cub, 1953 Ford Jubliee and 1957 Ford 740 Row Crop, Craftsman Mower, Deere 350C Dozer 50 assorted vehicles from 1905 to 2006
I bought one of the Honda branded fuel jugs for my chain saw for $20. It's much better than the Home Depot/Lowes offerings in my area.
LBrown59
Super Star Member
- Joined
- Oct 27, 2004
- Messages
- 16,831
- Tractor
- 2003 Kubota BX1500/2004 Kubota Bx23/2005 Kubota BX1500
I fought the can thing till i set up a 30 gallon drum with an electric pump.
Should have done it 4 years ago when i bought the tractor.
Should have done it 4 years ago when i bought the tractor.
dixiedrifter
Silver Member
- Joined
- Jun 17, 2004
- Messages
- 206
Well I went to Walmart the other day looking for a new diesel can and bout crapped when I seen how much they cost.
Then I seen the new positive shut off valve thingy on top and I didn't know what to make of them.
Actually now that I used one I really like them, especially the gas cans... in fact they don't stink because of the valves on them when you put them indoors and you don't have to worry about moisture.
Then I seen the new positive shut off valve thingy on top and I didn't know what to make of them.
Actually now that I used one I really like them, especially the gas cans... in fact they don't stink because of the valves on them when you put them indoors and you don't have to worry about moisture.
Lunk
Platinum Member
I just bought a couple more from TSC this last Saturday. 7 bucks and change apiece. They have that annoying "I can pee faster than this thing empties" vented spout. First thing I always do is heat a punch with the mapp torch, and poke a hole where the vent should be. Before the plastic cools, I spin a course-thread eyelet screw into the slightly smaller hole. The plastic forms a really tight seal, and the eye gives me something that's easy to grip with a pair of gloves on.
Voila! Vented fuel can.
I like the new one w/ the spring-loaded spout better than the old one w/ the self-venting spout. The new one has a hook that rests on the edge of the fill spout, I just have to balance. With the old style, I had to hold the weight while it slowly emptied.
