Slippy
Veteran Member
- Joined
- Sep 23, 2002
- Messages
- 1,053
- Location
- Ohio
- Tractor
- Mahindra 6000 4wd; IH x2; NHTC40DSS; International 1086; JD 5115M
I think my clutch is showing signs of wear. I moved 400 round bales over the weekend and noticed that I have to let the clutch almost all the way out to the top before the tractor will begin to move.
I read the manual at page 50 and it talks about clutch pedal adjustment of 4.7" between top edge of pedal pad & the foot plate. It says clutch free play should be 20mm at stopper pad. What does this mean and how do I measure it.
It says the way to adjust is to turn the release shaft till the inner bearings stop against the fingers. What does that mean?
Help please.
I read the manual at page 50 and it talks about clutch pedal adjustment of 4.7" between top edge of pedal pad & the foot plate. It says clutch free play should be 20mm at stopper pad. What does this mean and how do I measure it.
It says the way to adjust is to turn the release shaft till the inner bearings stop against the fingers. What does that mean?
Help please.