mjncad
Super Member
I forgot to mention Magnum, I like the calendar behind the tractor in one of the photos. 
Homemade Tractor
- Thread starter Magnum_MX285
- Start date
- Views: 22445
Bill Barrett
Platinum Member
- Joined
- Jul 11, 2006
- Messages
- 671
- Location
- midwest
- Tractor
- Kubota L3130, Satoh G650, Case 580, Case 446
I forgot to mention Magnum, I like the calendar behind the tractor in one of the photos.
Man I'm old all I saw was the tractor!
Magnum the axles from Case/ Ingersol hydraulic type tractors?
Spudland_Dave
Veteran Member
Would you have any info about those axles? I've been kicking around a project of mine which would require a similar setup....Articulated Steering & Hydro Axles...and whats been holding me up are the axles and what to use....
OP
Magnum_MX285
New member
- Joined
- Dec 2, 2008
- Messages
- 2
- Tractor
- Case IH MX285 Magnum
Sorry all for the horribly late response, I must've been sidetracked and then forgot about this thread. Dad got a kick out of quite a few of the responses, and he definitely appreciates them all.
MarkV: You're right, this wasn't his first rodeo, he loved that phrase btw. I believe one of his first was building a homemade off-road, I dunno, "fun vehicle". Kind of similar to say a side-by-side off roader but built heavier and quite a bit bigger but only 2WD. That got completed, and eventually cannibalized for something else. Now its sitting derelict. Then came a further evolution of that he did for a handicapped man (paralyzed from the chest down I believe). Not too sure what it was powered by, but it had a hydrostatic transmission, a folding rear ramp, a locking system to lock his wheel chair in place, and quite a few different unique items. The best way I can describe it to you is in his own words, it looked like a WW2 halftrack in the way the grille and hood was laid out.
CCWKen: Dad liked that image. He was particularly impressed with the reach of the loader. A very sharp machine for sure.
Woodlandfarms: Yes, he still has it. Uses it often in fact. Well especially moreso this year with the additional snow in its primary role of snowblowing (and using a blade).
Spudland Dave and Bill Barrett: He used Case hydraulic drive garden tractor rear ends. If you have any other questions feel free to ask, he'd be happy to answer.
MarkV: You're right, this wasn't his first rodeo, he loved that phrase btw. I believe one of his first was building a homemade off-road, I dunno, "fun vehicle". Kind of similar to say a side-by-side off roader but built heavier and quite a bit bigger but only 2WD. That got completed, and eventually cannibalized for something else. Now its sitting derelict. Then came a further evolution of that he did for a handicapped man (paralyzed from the chest down I believe). Not too sure what it was powered by, but it had a hydrostatic transmission, a folding rear ramp, a locking system to lock his wheel chair in place, and quite a few different unique items. The best way I can describe it to you is in his own words, it looked like a WW2 halftrack in the way the grille and hood was laid out.
CCWKen: Dad liked that image. He was particularly impressed with the reach of the loader. A very sharp machine for sure.
Woodlandfarms: Yes, he still has it. Uses it often in fact. Well especially moreso this year with the additional snow in its primary role of snowblowing (and using a blade).
Spudland Dave and Bill Barrett: He used Case hydraulic drive garden tractor rear ends. If you have any other questions feel free to ask, he'd be happy to answer.
drivadesl
Gold Member
- Joined
- Oct 10, 2007
- Messages
- 288
- Location
- Hudson Valley, NY
- Tractor
- New Holland TN-70A, Kubota U-35 Mini-Ex,SCAG Wild Cat, Cub Cadet 109
Man, your dad must have some awesome set of tools!!
