Recently there was a thread about the most important tools to have on your tractor. Lots of good suggestions about the minimal gear required. I could'nt find that thread again, but I have another suggestion that was not previously mentioned. TP, yes toilet paper, don't leave home without it!
Most important tools on your rig
- Thread starter smokydune
- Start date
- Views: 6221
joe48
Gold Member
I don't know what you have in your neck of the woods but we used burdock leaves. for that trip to the hedge row!!!!
SFish
Silver Member
I keep an axe, a folding saw, a lopper, and a multi tool (pliers, knife, and beer opener are crucial) hanging on the ROPS uprights by bungees (another useful tool). I usually have a 20 ft chain with clevis hooks on whatever 3PT implement I have on the rig, or the backhoe. In the toolbox are various extra pins, keepers and cotter pins, a large punch and short handled claw hammer, all the end wrenches that fit common bolts and hydraulic fittings, a pair of dikes, small and large crescent wrenches, a pair of screwdrivers, and a small vise grip pliers. In the square tube on top of the loader bucket, that is the mount for a pin-on grapple, is a 5 ft heavy digging bar. In the cup holder there is usually an insulated coffee mug, or a pop, or a beer, depending on what I am up to.
I am a traveling tool store, but I have used all of these items many times while out in the field. Steve
I am a traveling tool store, but I have used all of these items many times while out in the field. Steve
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
1st aid kit ain't bad either!
soundguy
soundguy
kebo
Elite Member
- Joined
- May 16, 2006
- Messages
- 2,931
- Location
- Lexington, SC
- Tractor
- 2001 John Deere 790 4x4, bar tires
Cell phone.
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
I thought about that one.. but that's kinda somehting you always have with ya.. like a wallet.. etc.... but yeah.. good safety device!
soundguy
soundguy
Dead Horse
Platinum Member
Hammer, a BFH. And 20 feet of chain.
farmboy12
Platinum Member
- Joined
- Feb 18, 2008
- Messages
- 918
- Location
- Benedict, MD
- Tractor
- Kubota M4900 FEL; New Holland TC30 MMM; Ford 1620; Ford 1520 MMM; John Deere X740; John Deere 455 MMM; Craftsman 19.5hp;;;;; Antiques: 1946 John Deere B; 1951 John Deere MT; 1952 Allis Chalmers B; 1967 International 140
On most of the tractors, there is a large torque wrench that can be used as a hammer as well, 10ft of chain, and extra pins. And all the operators have knives and cell phones on them.
Kyle
Kyle
lawn_king
Veteran Member
- Joined
- Jun 17, 2006
- Messages
- 1,623
- Location
- Hanover massachusetts
- Tractor
- kubota L 3540 hsdc,B 2320 hsdc & lots of other stuff!
Gloves,phone/radio,buck knife,short chain, compact dicks (beatles,stones,yes).
kthompson
Elite Member
- Joined
- Sep 12, 2008
- Messages
- 3,526
- Location
- South Carolina
- Tractor
- Kubotas B2710, M6800, L6060 cab, Volvo EC excavator, 2 ZTRs and various implements.
radioman
Super Member
honestly, I dont think what the best tools for one peson is the best tools for the next. I think the only way to know is to put some hours on your machine to the point where you get a little frustrated with not having the right tools next to you. As for me since I have a BX and using it on only 2 acres and dont travel with the BX often, I find I only need three things at this time. I have a wrench to adjust the 3 pt tension,needle nose pliers to pull small hair pins to remove the MMM , and rag for checking oil level. they all fit inside my little PVC toolbox mounted on fel arms. I have a fire extenguisher mounted on rops for a bit a safety.
Attachments
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
Yep.. it's a different tool set for the guy that is 100' away from his shop at all times, vs the guy that has run 4 miles down the road and needs EMERGENCY 'GET HOME' tools with him.
soundguy
soundguy
RWolf
Gold Member
- Joined
- Apr 1, 2008
- Messages
- 440
- Location
- Central Texas
- Tractor
- Current, Power King (antique), Soon to have JD 5103
I keep 2 pipe wrenches, cresent wrench, pliers, spare pins (which reminds me I need more shear bolts
) and about 10ft of chain. Everything else has been not to far away.
) and about 10ft of chain. Everything else has been not to far away.
lawn_king
Veteran Member
- Joined
- Jun 17, 2006
- Messages
- 1,623
- Location
- Hanover massachusetts
- Tractor
- kubota L 3540 hsdc,B 2320 hsdc & lots of other stuff!
Man i gotta be more careful! Thats embarrassing, should i post some pictures of the wife?
n6ckv
Bronze Member
A large cresent wrench. Used to tighting the nut on the top link, and removing the FEL, and as a hammer if needed. I don't have far to get to get to my tool box.
rdbrumfield
Veteran Member
That's ok Lawn King, just explain to us that you have a compact wife you keep in the closet.
SailorBob
Gold Member
A hat and a good cigar
Builder
Super Member
- Joined
- Feb 22, 2006
- Messages
- 6,155
- Tractor
- Kubota, AGCO, New Holland LB
I don't know what's worse, the mispelling or the music you listen to.
Yes?
...owner of a lonley heart.....owner of a broken heart.....owner of a lonley hearrrrrrrt.....
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
That's funny.. I also carry an 'adjustable' hammer in my tractor box as well. strangely enough.. it has jaws on it that seem to fit bolt heads!
soundguy
