OK, who else is ready?

[Hematite]

I suspect that everyone had a chance to try their equipment out! Between yesterday and today a lot of snow fell/ is falling over a large area of the U.S..

Didn't do too badly in the Mid Hudson Valley, I got 7 inches of very wet snow...more to come, I'm sure!

 

[stevem5215]

Best snow removal method I've ever used. Takes it down to nothing. I have the cleanest driveway by 8:30am of anyone in the neighborhood. It is awesome.

Steve (and Granddaughter Bridget)

 

[yooperdave]

I have a 7.5' wide BOSS snow plow. It floats, is fully hydraulic, and usually makes me happy.

Yooper Dave

 

[Carykong]

Here in tidewater Virginia snow is infrequent but when it snows its a big deal. A couple of inches is considered an epic blizzard. So I am prepared to clear snow off my dirt/gravel driveways (about700ft) with my 5' blade. It's all I need. picture attached. To my northern tractor bros,wishing you fun with snowblowers,snow plows,enclosed cabs,etc

 

[Carykong]

sorry gang,sent wrong image. here is proper image of my blade and Case VAC tricycle that conquers the snow in tidewater virginia

 

[devildog1]

I'm ready here in upstate New York, good thing I was that winter storm that blew across the states hit us with 11" of wet snow Wednesday morning. Used the 30" 10 horse power walk behind for close clean-ups, used the B3200 for end of driveway where the big state plows with wings leave cement type snow. I also have a 8' Fisher Minute Mount attached to a F350 4X4 Power Stroke Diesel sitting in the garage if needed,( never can be over ready)
DevilDog

 

[Tractordawg]

Now I remember why I moved fron Rochester NY to Charlotte NC.

 

[Runner]

I guess I'm the tail-end Charlie. The weatherman inspired me to get ready with a prediction of 10 inches of snow for Christmas Eve. Miss my loader already, good thing this stuff is all "quick-tach"....

 

[bp fick]

I guess I'm the tail-end Charlie. The weatherman inspired me to get ready with a prediction of 10 inches of snow for Christmas Eve. Miss my loader already, good thing this stuff is all "quick-tach"....

Get yourself a piece of ABS 1.5" or 2" for that front blade and you will be in hog heaven. Nice, nice rig. Gosh, that Deere looks good sitting there all primed and ready to go. Push it early, often and far, far away and you won't miss your loader one bit.

 

[Hematite]

I guess I'm the tail-end Charlie. The weatherman inspired me to get ready with a prediction of 10 inches of snow for Christmas Eve. Miss my loader already, good thing this stuff is all "quick-tach"....

Yes, nothing like easy to attach implements!
Wow, you have some serious wheel weights on your JD. Is that 3 sets? You won't have any problem pushing snow!