I got my Metalpro Ironworker

[SPIKER]

It weighs about 500lbs. I only get the slugs when cutting angle iron. I contacted MetalPro and they said it had to do this to keep both sides of the cut from distorting. I need to find a use for these now.

flying monkeys metal sculpture from wizard of OZ maybe.

 

[jmc]

I need to find a use for these now.

Seagull mobiles?

Thanks for posting this series of ironworker threads and we hope to see more.

John

 

[relaqbr]

I need to find a use for these now.

It looks as if you cut them apart at the angle they are about 1/4 of a circle. So cut them, weld them back together to make a half circle. Weld two of those together to make a full circle and then you can start adding circles to make a pipe to use for something important

Enjoy your machine! And keep us posted as to what you build with it.

Bob

 

[gerard]

wow, and up till now all i had on my wish list was a plasma cutter!! That thing is way too cool. I'd be cutting and bendin' stuff just 'cause I could! Very nice and very compact. Good luck with it and you just set your fabrication bar a bit higher! lookin' foward to see what you build

 

[gerard]

YouTube - METALpro Ironworkers Video

found this on youtube re your new toy (I mean tool)

 

[mojoinco]

I think Metlapro is wrong and your machine is broken. I could be over next week and take it home for 'adjusting'. Then you can come get it next Christmas. Sounds fair to me....

 

[JB4310]

I think Metlapro is wrong and your machine is broken. I could be over next week and take it home for 'adjusting'. Then you can come get it next Christmas. Sounds fair to me....

HHP,
See I told you, you would get alot more friends with your new tool,

Gotta start charging a nominal fee, to help cover the cost of buying
or start really racking up the favor points!

 

[Hooked_on_HP]

I am being smart about this. I am telling everyone that doesn't know me(or where I live) about it snd my friend don't know about it yet.
Bill

 

[Stimw]

Find any use for the machine yet?

 

[Hooked_on_HP]

Find any use for the machine yet?

Check out this post http://www.tractorbynet.com/forums/build-yourself/161183-tandem-axle-wagon-build.html
Bill